Large iron box lock from Conestoga Cotton Mill #3 gate. Very long rectangular box has four screw holes for securing to gate and two very small butt hinges attached with screws to back edge. A projecting hollow key escutcheon is riveted to front of box about 5" from one end. Key would be inserted into lock through escutcheon.
In addition, there is an iron latch plate with L-shaped projection mounted onto face of plate, for receiving a lift latch bar. It has five screw holes for mounting on gate.
Depth or thickness is box lock only. Overall thickness including projecting handle holder is 3".
Condition
Fair
Condition Date
2014-10-07
Condition Notes
Expected strong weathering, resulting in surface pitting, rust, white paint residue and 3 significant cracks branching out from one screw hole near latch holder. Latch plate is extremely worn with apparent missing sections. L-shaped projection has lost its original surface due to grinding. Interior of box lock also ground away in sections.
World War I medal consists a cast bronze pentagonal medallion suspended from a silk ribbon of green and white, pinned to an oblong buff colored card printed with "WELCOME HOME / BOYS!" at the top and "LANCASTER, PA. / MADE BY J.F.A.Co." at the bottom.
Medallion hangs from ribbon via two brass rings. Raised detail on face is "WELCOME HOME" written in a banner at top. At center is the Lancaster seal flanked by the date "1919". Banner at bottom reads "LANCASTER PA." Ribbon has a safety pin stitched to upper back side, and is mounted by pin onto printed card.
Inscribed in ink on card to right of medallion is "$6.50". Struck on reverse of medallion is "JFACo."
Bronze is very dark with tarnish and soil. Ribbon is in poor condition with losses of green threads at left and broken and separating threads at right side. Card is worn and darkened with bottom right corner missing.
Quilt of pieced silk hexagons, creating what is known as a Flower Garden pattern. Made by Jacob F. Trexler, M.D. a surgeon and physician on staff at St. Joseph (and also coroner, according to donor).
Quilt is made of a plethora of multicolored silks, pieced with the English template method. Each small hexagon was stitched over a cardboard template (still present). Plain, patterned and textured fabrics were used, and even some pompoms as "flower centers." Large "T" for Trexler is satin-stitched in gold on a dark blue velvet ground at center. Multiple letters, initials and monograms are embroidered on individual hexagons. These apparently represent family members since many end in "T," such as EMT (wife Ella Moore Trexler?), AFT, ENT, MAT (mother Mary A. Trexler?), MLT, MLW and MWT. Several symbols are also embroidered (sunburst w/ face, wheel, etc.)
Backing is a mustard colored quilted silk fabric.
According to donor, Dr. Trexler had his quilting frame set up on the 3rd floor of his residence at 134 N. Prince St. His office was on first floor. Donor owns three other quilts made by Trexler (he made many after retirement). These are a log cabin (silks with a polished cotton back), a star and an unfinished hexagon.
Provenance: Donor inherited the quilts from the Trexler family. In addition to other quilts, she possesses a 1920 photograph of Dr. Trexler.
Very good condition, minor soiling and fabric deterioration at some fabrics along edges.
See in file, pages from "Uncoverings 2003" Vol. 24 for article with comments on hexagonal quilts done with the "English paper-piecing" construction technique and their resurgence in popularity in the 1920 and 1930.
Spring loaded metal frame for parachute made by Pennsylvania Scale Company and Eagle Parachute Company, Lancaster, PA . "This mechanism released a small chute which in turn released the mechanism in the main 'chute.
During WW II, The PA. Scale Company in Bareville, under a subcontract employed about 5 men to solder small pieces on the ends of this parachute opener. Eagle supplied the pieces and PA Scale Company did only the soldering. After this work was done, the openers were sent back to the North Queen factory for further assembly." (Written by George H. Harsh, Lititz, PA,)
Cast-iron toy tri-motor Fokker aquaplane, painted yellow. Made of multiple castings fitted and securred with screws. Three wire spring cables are fitted to pulleys under plane, allowing the 4 rubber wheels to turn the 3 propellers and activate a noisemaker. Raised letters atop wings spell "FRIENDSHIP". "NX4202" is on tail and "Fokker" is on left side of fuselage. All letters painted blue. Inside hollow fuselage is "HUBLEY." Gold seal on left end of wing reads "It's a Hubley Toy". Profile of Earhart is cast into one of the two rear windows on left side.
The Friendship was flown across the Atlantic from Newfoundland to Wales, on June 17, 1928, with Amelia Earhart aboard. She was only a passenger, but this event won her immense fame, including a ticker tape parade in New York City, and started her career as a major celebrity. (see Notes on why this plane was made.)
Provenance
Plane was given to donor by his friend Charlie Reiger (sp?).
Moderate overal loss of paint; rust on exposed metal; cracking rubber on wheels.
Object ID
G.88.9
Notes
Hubley Mfg. Co. was commissioned by Pittsburgh industrialist Arthur E. Braun (1876-1976) to make 22 yellow aquaplanes modeled on Earhart's Friendship. Earhart signed each one and Braun gave the planes out as gifts at a reception in honor of Earhart, held at his own residence in Pittsburgh in June of 1929. This plane is unsigned, suggesting perhaps that this example may have been a factory extra.
In 1932, Earhart flew solo across the Atlantic, again achieving acclaim as the 2nd person and 1st woman to do so. She received the Distinguished Flying Cross from Congress, the gold medal of the National Geographic Society and the Cross of the Legion of Honor from France.
Place of Origin
Lancaster
Credit
Gift of Samuel S. Snyder, Heritage Center Collection
Cast iron ashtray in rectangular form, sloping sides, sunken top with raised sides having a textured surface with two corner indentations for cigarettes. Opposite end of indentation is a grouping of four geese, fully formed, attached to top surface with screws. Entire surface is bronzed with a pattern of oblique stripes on sides.
Marked "144" on bottom. The Hubley catalog "Metal Art Goods" lists this ashtray as #144 and named "Goosie Goosie Gander." The description notes it has "an unusual bronze finish".
Provenance
Owned by J. Roland Gilbert (1888-1940) and inherited by his daughter the donor (1916-1992). Donor writes: "acquired in the late '20s or early '30s and 'possibly' a gift from Mr. Joseph Breneman, a Hubley Exec." J. Roland Gilbert was president of Lancaster Press Inc. and general manager of the New Era Publishing Co.
Cast Iron Hubley Motorcycle with driver. Red "Indian" motorcycle with sidecar has a removable policeman with uniform, goggles, badge, sidearm, cap, boots and gloves. Cycle is painted red with silver handlebars, engine and highlights; sidecar seat is black. Decal on left side of gas tank has "Indian" on gold ground. Policeman is painted black with silver goggles, badge and buckle; face is pink. Three tires are marked "HUBLEY MFG CO. BALLOON" w/ size and "CORD". Metal "clicker" underneath. Sidecar policeman missing.
Moderate overall wear with soiling and significant scattered rusting and corrosion. All tires are flattened with some additional deformation.
Object ID
2010.023.2
Notes
Hubley Toy Company produced many different models, sizes and compositions of motorcycles during the years they were in production. Most of the motorcycles were based on Harley Davidson and Indian in the earlier years and then expanding to the BMW and perhaps others. Indian models are the most sought-after and have the highest value.
Hubley cast iron toy road roller based on actual roller made by Huber Mfg. Co. of Marion, Ohio. Tractor-like vehicle is green with red wheels. Long, thin body has single set of roller wheels at front and large roller wheels at back. At rear are a detachable cylinder tank and attached rake with wheels.
Gold-colored tank is embossed "HUBER" on both sides. Name is repeated within small molded ovals at both sides of front and on front grill body. Underside marked "HUBLEY" in raised letters. Various number on underside of various components.
Losses of paint, esp. on wheels and upper surface of vehicle. Rust and corrosion on unpainted surface. Break at one arm of rake attachment, underneath. Driver apparently missing.
Object ID
2010.023.3
Notes
The Smithsonian writes: "The Hubley Manufacturing Company of Lancaster Pennsylvania, became one of the nation's premier toy making companies. Incorporated in 1894, the company made eletric train related equipment before moving into the toy business in 1909. The toys were made of cast iron, and were often modeled on actual vehicles or machinery. The Huber mark refers to the Huber Manufacturing Company. Inventor and industrialist Edward Huber's Huber Manufacturing Company made farm machinery in Marion, Ohio. The company is credited with inventing the first workable gasoline tractor. It als manufactured road-building equipment."
Christmas card. Front features PA German design--two angels and doves on either side of a heart in which is printed "1946 An Old Fashioned Pennsylvania Dutch Christmas." Printed with had watercoloring. Inside is written "Merry Christmas from Henry and Zoe Kauffman/" Printed on front "Zoe T. Kauffman."
Christmas card. Green paper. On front reindeer in PA German style wreath. Printed "Anno 1949." Printed with hand watercoloring. Inside written "Merry Christmas from Zoe and Henry Kauffman." Printed on front "Z. Kauffman." Printed on back "Motif from Pennsylvania chalk figure."