Copper teakettle with round body, gooseneck spout, very low domed lid w/ scrolled knob of sheet copper riveted onto lid with a hand-cut washer added under lid, suggesting repair or replacement. Curved handle hinges onto tapered plinth tab bases with two rivets each. Vertical dove-tailed side seam opposite single-seamed spout. Dove-tailed bottom.
Touchmark on top of handle is "R..REED." within a rectangular reserve with serrated ends.
Made by Robert Reed, working in Lancaster 1771-1779, then 1785-1795.
Provenance
Purchased by Heritage Center from Philip Bradley Antiques
Transferred from Heritage Center to LancasterHistory.org December, 2012.
Tax assessment lists Robert Reed 1786-1793.
Kauffman, Henry J. American Copper and Brass. New York: Bonanza, 1979.
Coppersmith info from Shelley Horvath Posten (dau. of Don Horvath), 2009
Copper dented and scratched overall, polish residue at handle hinges. Side handle break repaired with sheet iron patch secured to outside with two iron rivets. Knob appears to be a repair or a replacement.
Object ID
P.80.131
Place of Origin
Lancaster
Credit
Heritage Center Collection. Purchased through the generosity of the James Hale Steinman Foundation,
Round copper vessel, shaped like a teakettle, but without a spout. A shaped strap handle is attached to each side of the opening at shoulder with riveted brackets. The handle widens near the middle, where the maker's mark is stamped: "P & B. SCHAUM"
Body is dovetailed to base, one dovetailed vertical seam, handle attached to flanges held in place by two rivets each. Pot insert is missing. Another insert (S.13) was purchased as a replacement.
Vessel has multiple dents, creating a general distortion overall. Surface is also tarnished and has drip stains running down the sides. The bottom is very worn and has numerous stains. Blueish-white stains on the inside. Polish residue on handle.
Object ID
P.77.61
Place of Origin
Lancaster
Related Item Notes
See broadside for Benjamin Schaum's hardware store, P.91.02
Credit
Heritage Center Collection. Purchased through the generosity of the James Hale Steinman Foundation
Copper tea kettle, classic form with gooseneck spout, high dome lid, marked strap handle hinged on "plinth w/ serifs" tab bases. Lid fitted with a crudely fashioned replaced iron or steel mushroom-shaped finial, bent to one side.
Vertical dove-tailed seam on side opposite spout, top seam running length of spout. Dove-tailed bottom.
Tarnished with numerous dents and scratches over body. Two very heavy dents at shoulder, opposite each other and one on bottom. Finial knob bent to one side. Two significant cracks on proper right side at shoulder and one on back.
Object ID
P.01.48.1
Place of Origin
Lancaster
Credit
Heritage Center Collection. Purchased through the generosity of the James Hale Steinman Foundation
Large copper teakettle with rounded body, goose-neck spout and hinged handle having a medium arc, mounted on shaped flanges with three rivets. The domed lid has a small brass mushroom knob (replaced). Dovetailed seams on bottom and vertical seam on side opposite spout. Seamed repair to spout tip.
"F. STEINMAN" is stamped on the handle within a reserve.
Provenance
Transferred from Heritage Center Collection, Dec. 2012
Jack Brubaker, The Steinmans of Lancaster, pp. 11-15.
HJ Kauffman, Early American Copper, Tin & Brass, 1995, pp. 42-43.
HJ Kauffman, American Copper & Brass, 1979, p. 65.
Height (in)
13
Width (in)
16
Condition
Good
Condition Date
2013-11-13
Condition Notes
Many dents and overall wear. HJK says handle slightly shortened (likely done by him). Tip of spout replaced. Plugged hole in bottom. Replaced knob. Stamped name very worn. Tarnished with polish residue where the spout, handle, and lid meet the main body.
Object ID
G.77.14
Notes
When his father died in 1758, John Frederick Steinman, Sr. (1752-1823) moved with his mother to Lititz from his birthplace, Bethlehem, Pennsylvania. His mother remarried a few years later to John Christophe Heyne, a tinsmith and pewterer from Lancaster. The shop of Heyne and Steinman would become known as Steinman's Hardware Store, the oldest hardware store in America.
Place of Origin
Lancaster
Credit
Heritage Center Collection. Gift of Henry J. Kauffman
Traditional tea kettle form made of tinned sheet iron. Now unmoveable handle hinged to oval tab bases with two rivets. Dovetailed vertical seam on side opposite spout: spout has a straight seam along top and also bottom of base section. Dovetail seam around shoulder top. Slightly domed lid has black-painted knob.
Made by George Rogers, tinsmith, (1814-1854, working c. 1848).
For references to G. Rogers, see Kauffman, American Copper and Brass, p. 207. Copy in file.
Also see 1859-60 Directory, p. 143 for reference to George Rogers.
Height (in)
11
Width (in)
11.75
Diameter (in)
8
Condition
Good
Condition Date
2013-11-18
Condition Notes
Interior heavily rusted. Dent to the right of the spout on shoulder. Multiple smaller dents. Multiple score lines, possibly from a rasp, especially on shoulder area.
Copper pint measure or mug. Straight sides taper in toward mouth with rolled lip edge. Strap handle anchored with 2 rivets at top; one at base. Keyed seam beneath handle. Some tinning remains on interior.
Handle is stamped "(E)ICHHOLTZ". Letter "E" is partially hidden at top.
Provenance
Purchased by Gunnions at Conestoga Auction circa March 1986.
Heritage Center purchased from Gunnion Antiques Aug. 1986
Tom Ryan, The Worlds of Jacob Eichholtz., pp. 1-3 and 82.
Henry Kauffman, American Copper and Brass, p. 119.
Height (in)
4.5
Width (in)
4.5
Diameter (in)
3.25
Condition
Good
Condition Date
2013-11-18
Condition Notes
Interior worn with some corrosion. Handle split below top left rivet. Small to significantly larger dents on sides and bottom. Some scratches from general wear. Surface has been polished and lacquered. Some polish residue visible at both the rolled lip and rolled base.
First "H" and "T" of "ichholtz" are very worn.
Object ID
P.86.3
Place of Origin
Lancaster
Credit
Heritage Center Collection, Acquired through the generosity of the James Hale Steinman Foundation.
Large redware pitcher, sectioned octagonal form with conforming low pedestal base. Applied handle and pulled pouring spout. Orange-red color dark brown manganese mottling with clear glaze overall.
Impressed mark on underside is "C GAST" for Conrad Gast (1813- after 1880).
Prince and James Sts. Lancaster, PA
Provenance
Heritage Center purchased from Ruth Rogers of School House Farm Antiques, New Holland.
Wear at all salient points of the lower body as well as the outside and tip of handle. Two medium chips at opposite sides of lip and several minor chips at spout and sides of lip. Wear at bottom.
Object ID
P.02.04.1
Place of Origin
Lancaster
Credit
Gift of V. Ronald Smith, Heritage Center Collection
Redware Storage Jar with Image of George Washington and Diana the Huntress
Description
Redware storage jar with molded figures of Washington & Diana. Made by Henry Gast.
Square molded red earthenware storage jar. Overall brown lead glaze with manganese speckling. Chamfered corners and sloping shoulders with short neck and flared rounded rim. Each side of jar has a recessed, arched panel containing figures in relief. Two opposing sides depict Diana the Huntress and other opposing sides portray George Washington labeled at bottom "WASHINGTON." Impressed on underside is "H. GAST. LA."
Large iron box lock from Conestoga Cotton Mill #3 gate. Very long rectangular box has four screw holes for securing to gate and two very small butt hinges attached with screws to back edge. A projecting hollow key escutcheon is riveted to front of box about 5" from one end. Key would be inserted into lock through escutcheon.
In addition, there is an iron latch plate with L-shaped projection mounted onto face of plate, for receiving a lift latch bar. It has five screw holes for mounting on gate.
Depth or thickness is box lock only. Overall thickness including projecting handle holder is 3".
Condition
Fair
Condition Date
2014-10-07
Condition Notes
Expected strong weathering, resulting in surface pitting, rust, white paint residue and 3 significant cracks branching out from one screw hole near latch holder. Latch plate is extremely worn with apparent missing sections. L-shaped projection has lost its original surface due to grinding. Interior of box lock also ground away in sections.
Pennsylvania Long Rifle; percussion cap; curly maple stock; iron barrel stamped "H. GIBBS" on top of barrel. Brass fittings and patch box. Some rust on iron and brass parts. Approximately .40 caliber muzzle. 44" barrel with an overall length of 61 inches.
See notes for information on Gibbs.
Provenance
Purchased by donor (Walt Dunlap) at auction in Lancaster County in 1956.
Henry Gibb Sr. and his son Henry Gibb were Lancaster City gunsmiths active for most of the nineteenth century. The father from 1812 until 1843 and the son from 1843 until 1880.
Place of Origin
Lancaster
Credit
Courtesy of LancasterHistory, Lancaster, Pennsylvania.
