Two thin sheets of torpedo-shaped ivory-colored bakelite/celluloid are joined by a small block of the same material at their centers. The ends of both sides curve towards each other, closing and touching at their end points. Shuttle is designed for loading with thread by wrapping thread around center block. One of pointed ends has a thin pointed tip that protrudes 3/8" in length.
Stamped "BUCILLA/ REG.U.S.PAT.OFF." on both sides of shuttle. Bucilla is a sewing supply company formed in 1867 with headquarters in Hazelton, PA. The internet lists many examples made of plated brass, bone, horn, etc.
Provenance
Collected by Lillian Hollings Kiker, born to Scottish Americans who lived in New Jersey. Born (1912) and lived in New Jersey, last of Egg Harbor, she was active with quilting, sewing, knitting & crocheting. Collection inherited by donor when her mother passed away.
Stiletto or bodkin of turned bone, fitted in a conical basket-weave holder or sheath.
Stiletto (A) has ball-shaped head with hole in it, then narrowing to a neck with additional swells and narrowing until it tapers from midsection down to a sharp point.
Holder (B) is an elongated cone made with a brown reed-like material woven onto ribs like a basket. Handle is a twisted form of the same material, shaped in a double loop configuration.
It is assumed that this pair of otems were originally dwsigned for each other.
Provenance
Collected by Lillian Hollings Kiker, born to Scottish Americans who lived in New Jersey. Born (1912) and lived in New Jersey, last of Egg Harbor, she was active with quilting, sewing, knitting & crocheting. Collection inherited by donor when her mother passed away.
Tatting hook of bone handle shaft of iron hook set into smaller end.
Tool has handle of elongated teardrop shape, somewhat flattened in cross-section. Wire-like shaft with rounded hook on tip is set into handle. Shaft is thicker than hooked end.
Provenance
Collected by Lillian Hollings Kiker, born to Scottish Americans who lived in New Jersey. Born (1912) and lived in New Jersey, last of Egg Harbor, she was active with quilting, sewing, knitting & crocheting. Collection inherited by donor when her mother passed away.
Needle case of turned hardwood (maple?). Cylindrical body was turned in two pieces and strong chamfers at each blunt ends. Center band of glossy black with three scored lines at midpoint. Ends also painted black with a score line on each. Additional daubs of black paint on unpainted body.
Cylinder is hollow for holding needles. One third of body pulls off like a cap, sliding off a male extension of the 2/3 section. No contents.
Provenance
Collected by Lillian Hollings Kiker, born to Scottish Americans who lived in New Jersey. Born (1912) and lived in New Jersey, last of Egg Harbor, she was active with quilting, sewing, knitting & crocheting. Collection inherited by donor when her mother passed away.
Needle case of cast silver is a square-bodied long container that tapers from one end to the other. Made of 2 pieces, the thickest end is the cap that fits on a male extension of the main body. The length of each side of case is constructed of identical cast pieces of silver with a soldered seam still visible.
Decorated with low-relief roses on cap; grapevine and football shape are on main body. Small panels on narrower sides have a slogan in German: "ZUM / ANDENKEN / KEINE ROSEN / OHNE DORNEN" which translates as a warning to not prick one's self with the needle. Literally, it states "Remember (there are) no roses without thorns."
Possibly Germany
Provenance
Collected by Lillian Hollings Kiker, born to Scottish Americans who lived in New Jersey. Born (1912) and lived in New Jersey, last of Egg Harbor, she was active with quilting, sewing, knitting & crocheting. Collection inherited by donor when her mother passed away.
Needle case with needle threader, two pieces, a long metal tubular case of bronzed metal. Most of the object is the hollow tubular handle, 2.75" in length, with one rounded end and male-shaped "cap" fitting into opposite end. Handle has bery fine ribs running lengthwise on exterior. Cap end is very short with a smooth exterior. It has one rounded end while opposite end - that fits into handle - is fitted with a fine wire loop used to thread needles. The loop is mounted into red-painted wood which is in turn set into cap's hollow end. To use tool, cap is removed, reversed end for end, and reinserted into hollow handle.
On side of cap is stamped "GERMANY."
Provenance
Collected by Lillian Hollings Kiker, born to Scottish Americans who lived in New Jersey. Born (1912) and lived in New Jersey, last of Egg Harbor, she was active with quilting, sewing, knitting & crocheting. Collection inherited by donor when her mother passed away.
Bodkin of bone is a flattened needle with one rounded end and one end with a blunt point. Slot of 5/8" in length is cut into body near rounded end. This tool is used for threading ribbons, etc. through casings, fabric tubes or loops.
Provenance
Collected by Lillian Hollings Kiker, born to Scottish Americans who lived in New Jersey. Born (1912) and lived in New Jersey, last of Egg Harbor, she was active with quilting, sewing, knitting & crocheting. Collection inherited by donor when her mother passed away.
Bodkin of steel is a blunt needle used for threading ribbons or other fabric through casings, loops, etc.
Two thin pieces of tapered steel are laminated together through half their length at narrow end. Two pieces at wider end are separated, allowing a ribbon or other material to be fitted into "jaws" and clamped in place via a sliding mechanism fitted into slot that extends lenthwise toward jaws. Inside of jaw ends have 3 pairs of raised barbs or teeth that enable the jaws to hold material without slipping.
Stamped on one side at midsection is "THE DOT." This likely refers to the rounded sliding mechanism fitted in the slot.
Provenance
Collected by Lillian Hollings Kiker, born to Scottish Americans who lived in New Jersey. Born (1912) and lived in New Jersey, last of Egg Harbor, she was active with quilting, sewing, knitting & crocheting. Collection inherited by donor when her mother passed away.
Bodkin of steel is a blunt needle used for threading ribbons, tape or other fabric through casings, loops, etc.
Bodkin is two thin pieces of tapered steel that are laminated together through half their length at narrow end. Two pieces at wider end are separated, allowing a ribbon or other material to be fitted into "jaws" and clamped in place via a sliding mechanism fitted into slot that extends lenthwise toward jaws. Jaws are enabled to hold material without slipping via two raised beads stamped into one side and two matching holes on other side.
Stamped onto one side of tool at midsection is "PATD. MAR. 29. 92."
Provenance
Collected by Lillian Hollings Kiker, born to Scottish Americans who lived in New Jersey. Born (1912) and lived in New Jersey, last of Egg Harbor, she was active with quilting, sewing, knitting & crocheting. Collection inherited by donor when her mother passed away.
Set of tatting tools, nickel silver plated steel, has four pieces. Each piece has in common the shaped and decorated portions, the handles of the three tools and the needle case body. This feature is a flattened octagonal shape in cross-section, with successive divots ground out with a round grinding wheel. Handles and case all taper along their length.
A. Needle case is 2.75" long and .375" wide. At the heavier end of case is a fitted cap that slides onto a smaller male extension protruding from main body. Seam visible along sides where both halves of case have been joined.
B. Hook on handle is 4" long and .25" wide. Tapers from handle end down to where shaft is attached. Shaft has ball-and-ring at handle, a slight swell along length and a minute hook at tip.
C. Awl is 3.625" long and .25" wide. Same handle as above. Shaft is similar in shape except heavier and shorter and has a sharp tip.
D. Threading tool(?) is 3" long and .5" long. Same handle as above. Shaft is shorter and has a large open loop in a teardrop shape.
Provenance
Collected by Lillian Hollings Kiker, born to Scottish Americans who lived in New Jersey. Born (1912) and lived in New Jersey, last of Egg Harbor, she was active with quilting, sewing, knitting & crocheting. Collection inherited by donor when her mother passed away.
