Stiletto or awl of steel with wood handle and handmade protective tip.
Tool has a shaft of rounded steel coming to a sharp point. Mounted on a black-painted, turned wood handle, largest at end and tapering toward steel shaft where it terminates with two turned rings.
A chromed metal slide glides along tool shaft and is clamped in place with a knurled screw. Stamped on this slide is "PATD' APR-6-09" (or 00) and nearby is a symbol with the words "TRADE/ MARK."
Stiletto is fitted with a protective tip made of a bottle cork with crocheted cover and crocheted top ring.
Provenance
Collected by Lillian Hollings Kiker, born to Scottish Americans who lived in New Jersey. Born (1912) and lived in New Jersey, last of Egg Harbor, she was active with quilting, sewing, knitting & crocheting. Collection inherited by donor when her mother passed away.
Ribbon threader or bodkin is a blade of nickel-plated non-ferrous metal, in a torpedo shape, wide and rounded at one end and tapering to a point at other end. Two slots are cut in wide end for stringing ribbon that needs to be threaded through casings in waistbands, wristbands, etc.
Stamped inscriptions: On one side of tool is "RIBBON THEADER", "REGISTERED", "No. 3", AND "K.B.C.".
Provenance
Collected by Lillian Hollings Kiker, born to Scottish Americans who lived in New Jersey. Born (1912) and lived in New Jersey, last of Egg Harbor, she was active with quilting, sewing, knitting & crocheting. Collection inherited by donor when her mother passed away.
Stiletto or bodkin of turned bone, fitted in a conical basket-weave holder or sheath.
Stiletto (A) has ball-shaped head with hole in it, then narrowing to a neck with additional swells and narrowing until it tapers from midsection down to a sharp point.
Holder (B) is an elongated cone made with a brown reed-like material woven onto ribs like a basket. Handle is a twisted form of the same material, shaped in a double loop configuration.
It is assumed that this pair of otems were originally dwsigned for each other.
Provenance
Collected by Lillian Hollings Kiker, born to Scottish Americans who lived in New Jersey. Born (1912) and lived in New Jersey, last of Egg Harbor, she was active with quilting, sewing, knitting & crocheting. Collection inherited by donor when her mother passed away.
Bodkin of bone is a flattened needle with one rounded end and one end with a blunt point. Slot of 5/8" in length is cut into body near rounded end. This tool is used for threading ribbons, etc. through casings, fabric tubes or loops.
Provenance
Collected by Lillian Hollings Kiker, born to Scottish Americans who lived in New Jersey. Born (1912) and lived in New Jersey, last of Egg Harbor, she was active with quilting, sewing, knitting & crocheting. Collection inherited by donor when her mother passed away.
Bodkin of steel is a blunt needle used for threading ribbons or other fabric through casings, loops, etc.
Two thin pieces of tapered steel are laminated together through half their length at narrow end. Two pieces at wider end are separated, allowing a ribbon or other material to be fitted into "jaws" and clamped in place via a sliding mechanism fitted into slot that extends lenthwise toward jaws. Inside of jaw ends have 3 pairs of raised barbs or teeth that enable the jaws to hold material without slipping.
Stamped on one side at midsection is "THE DOT." This likely refers to the rounded sliding mechanism fitted in the slot.
Provenance
Collected by Lillian Hollings Kiker, born to Scottish Americans who lived in New Jersey. Born (1912) and lived in New Jersey, last of Egg Harbor, she was active with quilting, sewing, knitting & crocheting. Collection inherited by donor when her mother passed away.
Bodkin of steel is a blunt needle used for threading ribbons, tape or other fabric through casings, loops, etc.
Bodkin is two thin pieces of tapered steel that are laminated together through half their length at narrow end. Two pieces at wider end are separated, allowing a ribbon or other material to be fitted into "jaws" and clamped in place via a sliding mechanism fitted into slot that extends lenthwise toward jaws. Jaws are enabled to hold material without slipping via two raised beads stamped into one side and two matching holes on other side.
Stamped onto one side of tool at midsection is "PATD. MAR. 29. 92."
Provenance
Collected by Lillian Hollings Kiker, born to Scottish Americans who lived in New Jersey. Born (1912) and lived in New Jersey, last of Egg Harbor, she was active with quilting, sewing, knitting & crocheting. Collection inherited by donor when her mother passed away.
Quaker bonnet owned and worn by Mercy Moore Carter Wood. Black silk shell on both brim and back. Back is lined with loose-weave linen scrim, pleated, and back is gathered on the top where attached to the brim. Linen tape and lining connect brim to back inside. 5"-deep brim lined in white silk.
On bonnet back at bottom is a black silk ruffled skirting trimmed above with a prominent bow. Wide black silk ties attached to base of brim, approx. 23" long, have unfinished, fraying ends.
Mercy Moore Carter Wood (b. Nov. 29, 1822 and d. Sept. 14, 1911) married James Wood in 1845, lived on a farm in Little Britain Twp. near Kirk Mills and raised 8 children. James Wood was a farmer and bank director. The Woods were members of the Eastland Friends Meeting, located in Little Britain Twp. between Wrightsdale and Kirks Mills.
Photo of Mercy Wood in file, with inscription on reverse side of frame (now discarded) is: "Mercy Moore Carter Wood/ Taken on her 80th/ Birthday 1902/ on the Wood farm at family reunion." Photo is mounted on board imprinted "C.W. Thomas/ Electric Block/ Oxford, PA."
See also G09.2.2 -- cap belonging to same owner.
Provenance
Descended in family to donor who is the great granddaughter of Mercy Wood.
Brown mildewed spotting on brim lining. Overall darkening of linen lining, especially at neck. Outer shell of bonnet has sprinkling of light mildew spots.
Object ID
G.09.02.1
Place of Origin
Little Britain Twp.
Credit
Heritage Center Collection, gift of Ruth C. Wodock
Pewter dram bottle, canteen or flask. Flattened round body with flat bottom having a thin oval foot. Seam at center of rounded sides. Very short, tapered, threaded neck has a fitted and threaded 3/4" high thimble-shaped cap. Decorative concentric circles incised on flattened sides.
Touchmark stamped on bottom is "I.C H/ LANCASTER" in lettering with serifs. Mark is a Laughlin touch #532, 533.
W. King Street, Lancaster
Provenance
Bottle was in the attic of Samuel R. Haldeman's home until he died and Harry, the youngest son, surreptitiously took it along with other belongings to Buffy's Auction in Lebanon where the bottle was sold in a box lot to Mahlon Keith for 30 cents. Keith later sold it to friend William Snyder of Bleak House in Paradise for about $400. Snyder then sold it at the Bleak House sale through A.R. Cox Antiques of Kinzer on May 4, 1965 to donor Dr. Scott, who purchased it for $5,000. Heritage Center purchased at Scott sale (Christie's) for $18,400 on June 10, 1994.
Small molded sugar bowl (A) with fitted lid (B), of white-bodied china. Bulbous pear shaped body has leaf molded exterior and four sagging lobes that bulge at the base. Two applied rustic handles. Decorated with dark blue on upper 1/3 of bowl. Gold-painted highlights on one side only, on handles and embossed leaves at sides. On side of body in stamped, gold lettering is: "Souvenir/ of/ Lancaster/ Pa."
Fitted, domed lid (B) is molded with foliate inspiration with rustic handle/finail.
Stamped underneath in gold is a crown over shield witht the monogram of "TGC"(?) The number "12" also stamped in gold.
Provenance
Donor believes this set was purchased at Woolworth's store in Lancaster.
Sugar bowl with lid, hard-paste eathenware has white clay body hand-decorated with cobalt blue. Squat, bulbous body sits on foot ring; pot-belly sides have a large beaded shoulder leading to a narrowed neck and finishing with an outward flaring rim w/ coggled edge. Four or five blue bands painted while on the wheel and remainder painted freehand. Bulbous section alternates with two different leaf designs suspended from the blue-painted shoulder bead. Large round dots are spaced between each leaf. Coggled edge is blue and top of rim has a leaf form painted in two rows. The domed lid has a bee skep finial painted blue, a wide blue strip at botom edge of lid and four leaves in mid-section of same two designs as on bulbous body. Clear glaze over all.
Small "S" impressed underneath at side, perhaps signifying the potter.
Good 3/8" long chip at coggled rim edge showing a very white clay which suggest a later date. Wear and soil at bottom and soil scattered over entire piece. Overall crazing.
Object ID
G.81.7
Credit
Gift of Florence Starr Taylor in memory of Annie Mottern Taylor, Heritage Center Collection
