Light tan earthenware sectional spittoon with darker "runny" slip or glaze finish. On bottom is impressed "Eagle Porcelain Works / Lancaster PA / Henry Gast S.Q. ST."
Copper tea kettle, classic form with gooseneck spout, high dome lid, marked strap handle hinged on "plinth w/ serifs" tab bases. Lid fitted with a crudely fashioned replaced iron or steel mushroom-shaped finial, bent to one side.
Vertical dove-tailed seam on side opposite spout, top seam running length of spout. Dove-tailed bottom.
Tarnished with numerous dents and scratches over body. Two very heavy dents at shoulder, opposite each other and one on bottom. Finial knob bent to one side. Two significant cracks on proper right side at shoulder and one on back.
Object ID
P.01.48.1
Place of Origin
Lancaster
Credit
Heritage Center Collection. Purchased through the generosity of the James Hale Steinman Foundation
Large copper teakettle with rounded body, goose-neck spout and hinged handle having a medium arc, mounted on shaped flanges with three rivets. The domed lid has a small brass mushroom knob (replaced). Dovetailed seams on bottom and vertical seam on side opposite spout. Seamed repair to spout tip.
"F. STEINMAN" is stamped on the handle within a reserve.
Provenance
Transferred from Heritage Center Collection, Dec. 2012
Jack Brubaker, The Steinmans of Lancaster, pp. 11-15.
HJ Kauffman, Early American Copper, Tin & Brass, 1995, pp. 42-43.
HJ Kauffman, American Copper & Brass, 1979, p. 65.
Height (in)
13
Width (in)
16
Condition
Good
Condition Date
2013-11-13
Condition Notes
Many dents and overall wear. HJK says handle slightly shortened (likely done by him). Tip of spout replaced. Plugged hole in bottom. Replaced knob. Stamped name very worn. Tarnished with polish residue where the spout, handle, and lid meet the main body.
Object ID
G.77.14
Notes
When his father died in 1758, John Frederick Steinman, Sr. (1752-1823) moved with his mother to Lititz from his birthplace, Bethlehem, Pennsylvania. His mother remarried a few years later to John Christophe Heyne, a tinsmith and pewterer from Lancaster. The shop of Heyne and Steinman would become known as Steinman's Hardware Store, the oldest hardware store in America.
Place of Origin
Lancaster
Credit
Heritage Center Collection. Gift of Henry J. Kauffman
Traditional tea kettle form made of tinned sheet iron. Now unmoveable handle hinged to oval tab bases with two rivets. Dovetailed vertical seam on side opposite spout: spout has a straight seam along top and also bottom of base section. Dovetail seam around shoulder top. Slightly domed lid has black-painted knob.
Made by George Rogers, tinsmith, (1814-1854, working c. 1848).
For references to G. Rogers, see Kauffman, American Copper and Brass, p. 207. Copy in file.
Also see 1859-60 Directory, p. 143 for reference to George Rogers.
Height (in)
11
Width (in)
11.75
Diameter (in)
8
Condition
Good
Condition Date
2013-11-18
Condition Notes
Interior heavily rusted. Dent to the right of the spout on shoulder. Multiple smaller dents. Multiple score lines, possibly from a rasp, especially on shoulder area.
Copper pint measure or mug. Straight sides taper in toward mouth with rolled lip edge. Strap handle anchored with 2 rivets at top; one at base. Keyed seam beneath handle. Some tinning remains on interior.
Handle is stamped "(E)ICHHOLTZ". Letter "E" is partially hidden at top.
Provenance
Purchased by Gunnions at Conestoga Auction circa March 1986.
Heritage Center purchased from Gunnion Antiques Aug. 1986
Tom Ryan, The Worlds of Jacob Eichholtz., pp. 1-3 and 82.
Henry Kauffman, American Copper and Brass, p. 119.
Height (in)
4.5
Width (in)
4.5
Diameter (in)
3.25
Condition
Good
Condition Date
2013-11-18
Condition Notes
Interior worn with some corrosion. Handle split below top left rivet. Small to significantly larger dents on sides and bottom. Some scratches from general wear. Surface has been polished and lacquered. Some polish residue visible at both the rolled lip and rolled base.
First "H" and "T" of "ichholtz" are very worn.
Object ID
P.86.3
Place of Origin
Lancaster
Credit
Heritage Center Collection, Acquired through the generosity of the James Hale Steinman Foundation.
Large redware pitcher, sectioned octagonal form with conforming low pedestal base. Applied handle and pulled pouring spout. Orange-red color dark brown manganese mottling with clear glaze overall.
Impressed mark on underside is "C GAST" for Conrad Gast (1813- after 1880).
Prince and James Sts. Lancaster, PA
Provenance
Heritage Center purchased from Ruth Rogers of School House Farm Antiques, New Holland.
Wear at all salient points of the lower body as well as the outside and tip of handle. Two medium chips at opposite sides of lip and several minor chips at spout and sides of lip. Wear at bottom.
Object ID
P.02.04.1
Place of Origin
Lancaster
Credit
Gift of V. Ronald Smith, Heritage Center Collection
Large iron box lock from Conestoga Cotton Mill #3 gate. Very long rectangular box has four screw holes for securing to gate and two very small butt hinges attached with screws to back edge. A projecting hollow key escutcheon is riveted to front of box about 5" from one end. Key would be inserted into lock through escutcheon.
In addition, there is an iron latch plate with L-shaped projection mounted onto face of plate, for receiving a lift latch bar. It has five screw holes for mounting on gate.
Depth or thickness is box lock only. Overall thickness including projecting handle holder is 3".
Condition
Fair
Condition Date
2014-10-07
Condition Notes
Expected strong weathering, resulting in surface pitting, rust, white paint residue and 3 significant cracks branching out from one screw hole near latch holder. Latch plate is extremely worn with apparent missing sections. L-shaped projection has lost its original surface due to grinding. Interior of box lock also ground away in sections.
Pennsylvania Long Rifle; percussion cap; curly maple stock; iron barrel stamped "H. GIBBS" on top of barrel. Brass fittings and patch box. Some rust on iron and brass parts. Approximately .40 caliber muzzle. 44" barrel with an overall length of 61 inches.
See notes for information on Gibbs.
Provenance
Purchased by donor (Walt Dunlap) at auction in Lancaster County in 1956.
Henry Gibb Sr. and his son Henry Gibb were Lancaster City gunsmiths active for most of the nineteenth century. The father from 1812 until 1843 and the son from 1843 until 1880.
Place of Origin
Lancaster
Credit
Courtesy of LancasterHistory, Lancaster, Pennsylvania.
American Empire straight-front sideboard with crotch-grain veneered oblong gallery. The upper front has a shallow overhang with a wide center drawer and two replacement glass pulls. Front also has two end drawers with original spiral cut glass pulls. Below the frieze is a double-door cupboard flanked by single door cupboards faced with crotch-grain veneer with slightly sunk oblong panels, each fitted with brass-keyhole surrounds. The freeze surmounts four turned and reeded pilasters with bull-nose trim along the apron. The piece stands on eight turned legs terminating on bun feet.
Provenance
James Buchanan
To Harriet Lane Johnston
Purchased by Julius Friedrick Sachse at a Lancaster Auction
Bequeathed to Samuel B. Sadtler, Great Grandson to Mr. Sachse
a) Silver teapot with carved wooden handle; with three letter script monogram and decorative flourish on two sides; decorated base; gallery row. Stamped "D HALL" on bottom.
Percussion pistol; octagonal iron barrel becomes round at muzzle end. It is 3 1/2 inches long. Full-length stock is faux-grained maple. Percussion lock is moderately decorated with engraving and is marked on plate: "DREPPERD/ LANCASTER."
Brass t
Provenance
01/23/95 - Purchase from Vernon Gunnion 2002 Marietta Avenue, Lancaster, PA 17603 7173947527
Scratches on wood; scratches and dents on brass. Iron parts are rusted; barrel pitted at lock. Finish on wood is worn at edges; minor wood loss at muzzle end.
Object ID
P.95.01.01
Place of Origin
Lancaster
Credit
Gift of the James Hale Steinman Foundation, Heritage Center Collection
Stove Top hat, black with brim turned up greatly on sides, down front and back. Thin black grograin ribbon above brim. Crown tapers in, then out again slightly. Made by Schultz & Brothers, Lancaster, PA.
Clock wheel cutting machine used by Lancaster clockmaker Martin Shreiner, Sr. Made of steel and brass with turned wood handle knob on crank. Main frame of tool is steel resting on four rounded, downward-curving legs with coin-shaped feet. Many moving parts, arms and cranks/screws, including the swiveling cutting yoke/frame at top (cutter blade with arbor/spindle missing) and the shaped index arm that "reads" the holes on the 13"-diameter brass wheel furnished with concentric circles of surface holes.
The LaFonds call this a very sophisticated machine, incorporating Swiss, German and English ideas/influences. This indicates to them that the machine was made in America, very likely by Shreiner himself. It was imperative for clockmakers to own this tool to practice their trade. Few survive. This machine was first described in the early book or article (LCHS Bulletin) printed in 1917(or 1919) & 1939 by D. McGee who wrote about Lancaster clockmaking. Ed believes this machine to be "the finest American engine in existence" and that it very well may have been made by Shreiner, probably in the 1790s. The cutter blade was used to cut the teeth on the large brass wheels that turn the pinions. There would have been either a slitting cutter or a form cutter used. Carter Harris says form cutters were used by the 1790s.
Attributed to Martin Shreiner (1769-1866).
An 8x10 B&W photo is in picture file under "clocks." Also slide is in slide collection, #14-3-11.
Lancaster Borough, most likely
Provenance
Owned by two brothers, Samuel K. and William L. Fraser, clockmakers who lived in Lincoln (just west of Ephrata) and grandsons of clockmaker William Fraser (1801-1877), then to early collector Earl T. Strickler (FNAWCC) who had it on display at the Columbia Clock and Watch Museum. Upon Strickler's sudden death circa 1974, it was sold by his widow, Mary Jane Strickler, to Edward F., Jr. and Virginia A. LaFond who removed rust and kept it on a window sill. They then traded it to dealer Jamie Price for some clocks. Price had it on sale at the 2004 Philadelphia Antiques Show in mid-April where, as representative for the von Hess Foundation, Tom Cook, purchased it for this museum's collections.
Ed LaFond believes the Fraser family was related to the Gorgas family, thus they were in a position to inherit tools. Due to this, it was believed at first that both the machine and the scribe were from the Gorgas family. However, LaFond believes the Frasers were also related to the Shreiners. Stacy Wood claims this machine was one of Martin Shreiner's tools (Vol. 96, LCHS Journal).
Pitting on steel surfaces, slight discoloration on brass parts, signs of wear overall.
Object ID
G.04.19.1
Notes
Information from: Clockmakers of Lanc. Co., Wood/Kramer, 1977, p. 142. 225 Years of Timepieces (Catalog of 1st Annual Exh. of NAWCCM, 1979), p. 63. Stacy Wood researched origins and provenance of these tools and wrote article in Vol. 96 #4 of LCHS Journal. Conversations with Virginia LaFond ( 5/19/04), Ed LaFond (7/6/04) and Carter Harris (7/7/04).
Place of Origin
Lancaster
Usage
Shreiner, Martin
Credit
Gift of the Richard C. von Hess Foundation, Heritage Center Collection
