Copper teakettle with round body, gooseneck spout, very low domed lid w/ scrolled knob of sheet copper riveted onto lid with a hand-cut washer added under lid, suggesting repair or replacement. Curved handle hinges onto tapered plinth tab bases with two rivets each. Vertical dove-tailed side seam opposite single-seamed spout. Dove-tailed bottom.
Touchmark on top of handle is "R..REED." within a rectangular reserve with serrated ends.
Made by Robert Reed, working in Lancaster 1771-1779, then 1785-1795.
Provenance
Purchased by Heritage Center from Philip Bradley Antiques
Transferred from Heritage Center to LancasterHistory.org December, 2012.
Tax assessment lists Robert Reed 1786-1793.
Kauffman, Henry J. American Copper and Brass. New York: Bonanza, 1979.
Coppersmith info from Shelley Horvath Posten (dau. of Don Horvath), 2009
Copper dented and scratched overall, polish residue at handle hinges. Side handle break repaired with sheet iron patch secured to outside with two iron rivets. Knob appears to be a repair or a replacement.
Object ID
P.80.131
Place of Origin
Lancaster
Credit
Heritage Center Collection. Purchased through the generosity of the James Hale Steinman Foundation,
Round copper vessel, shaped like a teakettle, but without a spout. A shaped strap handle is attached to each side of the opening at shoulder with riveted brackets. The handle widens near the middle, where the maker's mark is stamped: "P & B. SCHAUM"
Body is dovetailed to base, one dovetailed vertical seam, handle attached to flanges held in place by two rivets each. Pot insert is missing. Another insert (S.13) was purchased as a replacement.
Vessel has multiple dents, creating a general distortion overall. Surface is also tarnished and has drip stains running down the sides. The bottom is very worn and has numerous stains. Blueish-white stains on the inside. Polish residue on handle.
Object ID
P.77.61
Place of Origin
Lancaster
Related Item Notes
See broadside for Benjamin Schaum's hardware store, P.91.02
Credit
Heritage Center Collection. Purchased through the generosity of the James Hale Steinman Foundation
Strainer of glazed redware, but with a lighter brown color than most redware. Resting on three tapered 1-1/8 " long feet. The flat-bottomed dish has straight sides that flare out to a molded, high lip. Applied handles at sides. Large holes in bottom and three rows of smaller holes at sides.
Lead glaze overall with some streaks/runs of a darker brown.
Numerous chips on body overall; some large ones on underside and a large chip on the side; handle edges have suffered the most significant chipping loss. Glaze is crackled overall and has some staining, particularly on the interior. Feet are moderately worn.
Object ID
G.98.12.17
Place of Origin
Pennsylvania
Credit
Gift of Mrs. S.R. Slaymaker II, Heritage Center Collection
Saltcellar of Stiegel-type clear glass, blown into a 3-piece mold. Body is an inverted pear form on a pedestal base. Upper body decorated with 25 slightly slanted vertical ribs. Bottom is slightly concave with pontil mark at center.
Provenance
Donor bought cellar for $70.00 at Horst Auction on 10-19-96, from the collection of Edward Miller.
Small free-blown wine or dram glass, Stiegel type. Conical form. Low profile knop on stem. Round pedestal base with concentric ring created by folded foot. Pontil mark on bottom.
Provenance
Purchased by donor Hampton C. Randolph, Sr., for $65 at the sale of the Henry E. Balmer estate, Lancaster, PA on April 20, 1996, then donated to the Heritage Center of Lancaster County.
Clear, free-blown leaded glass mug, near barrel shape. Stiegel-type glass has bubbles and other imperfections throughout. Applied threading at rim; ribbed loop handle; engraved design on side is a bird with floral and foliate designs. Pontil mark on bottom has been smoothed around edges with grinding wheel.
Similar to #5, plate 35 in "American Glass" by George and Helen McKearin.
Provenance
Descent within the Nichols family of Lancaster Co. Family history states mug was always kept in a decorated dower chest, dated 1808.
Clear mold-blown Stiegel-type glass mug in cylindrical form. Bottom quarter has 14 fluted ribs that carry through to the bottom and converge on the pontil mark. Rim edged with gold. Side has multicolored fruit and floral paint decoration with a central orange oval cartouche outlined in gold with gold cursive lettering: "Remember me." Applied handle.
Provenance
Descent to Sarah Muench from family, likely her Aunt Alice Potter Fordney, an antiques dealer.
Small plate, used as a paten (communion plate). Circular, with single reed brim, marked on bottom with initials "I.CH." and Jacobs touch #169. Double incised lines near brim and single incised line within sunken bottom.
Pewter flagon, one of a pair, made by Heyne and presented to the Warwick Congregation (now the Brickerville United Lutheran Church) for use as part of a communion service. Cylindrical tankard form of top half joins a bottom section that begins to swell until it flares out dramatically at bottom. Has three applied cherub's head feet bordered with wrigglework. Applied spout. Heyne then innovated by departing from German forms by using three English features: an applied hollow handle, a double-domed lid and an erect chairback thumbpiece.
At midline below three raised bands is an engraved two-lobed crown above large initials "MH" filled with wrigglework. Underside is stamped with Heyne's mark, a crown over the initials "ICH", and "LANCASTER" below. Undated, although the other flagon of this pair is marked "1776" on bottom.
Johann Christoph Heyne was working on West King Street in Lancaster Borough, 1752-1781.
Provenance
Possibly commissioned from Heyne by William and Mary Huber of this congregation and presented to the church with their initials.
Pewter flagon, one of a pair, made by Heyne and presented to the Warwick Congregation (now known as the Brickerville United Lutheran Church) for use as part of a communion service. Cylindrical tankard form of top half joins a bottom section that begins to swell until it flares out dramatically at bottom. Has three applied cherub's head feet bordered with wrigglework. Applied spout. Heyne then innovated by departing from German practice by using three English features: an applied hollow handle, a double-domed lid and an erect chairback thumbpiece.
At midline below three raised bands is engraved a two-lobed crown above large Roman initials "WH" filled with wrigglework. The underside of flagon is stamped with a crown over the initials "ICH". Below this is stamped "LANCASTER" and to the right is engraved "1766".
Johann Christoph Heyne was working on West King Street in Lancaster Borough, 1752-1781.
Provenance
Pair of flagons possibly commissioned from Heyne by William and Mary Huber of this congregation and presented to the church with their initials. Remained in use over the years until the congregation decided in 1997 to find a safe place for this valuable communion set.
Note: Another pair of flagons was ordered from Heyne in 1766 by Trinity Lutheran Church. Heyne also used the English round, hollow handle on those. However, that pair differs from ours, and all other later Heyne flagons, in that he incorporated the English style double domed lid and erect thumbpiece.
Overall wear: abrasions, nicks and dents. Dents on lid top. Large scratch at lower right of "H" Dark stains and small pinhole in thumbpiece. Interior has several small areas of deep scratches.
Object ID
P.97.08.2
Place of Origin
Lancaster
Credit
Acquired through the generosity of the James Hale Steinman Foundation and Friends of the Heritage Center Museum, Heritage Center Collection