Spool holder/dispenser, turned wooden round box with fitted, slightly domed lid. Container is pill-box shape with thin walls. Three holes of graduated size marked "40" "50" and "60" under each. Hole insets of white glass or bakelite. Vertical spindles/dowels meant to hold spools on bottom of inside are missing. Bottom covered with a dark brown, pebbled finish paper.
Fitted lid has painted and/or woodburned design (shells and sea flora?). Box has lacquered natural finish.
Large round paper label pasted to underside depicts three circular medals at center. Above the center one is "NEW YORK 1853."
At top of label is "JOHN CLARK JUNR. & CO./ MILE-END/ GLASGOW." At bottom of label is "BEST SIX CORD SPOOL COTTON/ ON BLACK SPOOLS/ THOMAS RUSSELL/ SOLE AGENT/ FOR THE UNITED STATES."
Provenance
Collected by Lillian Hollings Kiker, born to Scottish Americans who lived in New Jersey. Born (1912) and lived in New Jersey, last of Egg Harbor, she was active with quilting, sewing, knitting & crocheting. Collection inherited by donor when her mother passed away.
Heavy crazing onlid. Small abrasions overall. Hole inset missing for #40 size hole. Three spindles on interior are broken and missing. Interior dark with oxidation. Paper on bottom has old losses from peeling.
Object ID
G.05.15.5
Place of Origin
Glasgow, Scotland, UK
Credit
Gift of Susan Garofola in memory of Lillian Kiker (mother), Heritage Center Collection
Copper tea kettle, classic form with gooseneck spout, high dome lid, marked strap handle hinged on "plinth w/ serifs" tab bases. Lid fitted with a crudely fashioned replaced iron or steel mushroom-shaped finial, bent to one side.
Vertical dove-tailed seam on side opposite spout, top seam running length of spout. Dove-tailed bottom.
Tarnished with numerous dents and scratches over body. Two very heavy dents at shoulder, opposite each other and one on bottom. Finial knob bent to one side. Two significant cracks on proper right side at shoulder and one on back.
Object ID
P.01.48.1
Place of Origin
Lancaster
Credit
Heritage Center Collection. Purchased through the generosity of the James Hale Steinman Foundation
Copper sculpting/modeling tool hand fashioned to create a flattened, spoon-like handle leading to a rounded shank ending in another flattened end bent at the tip to create a short 1/2" extension bent to nearly a right angle for working in clay or plaster. End is squared off. Crude but effective tool for sculpting bears marks of hammering, especially underside of flattened handle. Used by Lloyd Mifflin. Tool presumed to have been fashioned by Lloyd Mifflin himself from a length of copper. Provenance: Mifflin to the Minnich sisters to the groundskeeper at Norwood to donors.
Strainer of glazed redware, but with a lighter brown color than most redware. Resting on three tapered 1-1/8 " long feet. The flat-bottomed dish has straight sides that flare out to a molded, high lip. Applied handles at sides. Large holes in bottom and three rows of smaller holes at sides.
Lead glaze overall with some streaks/runs of a darker brown.
Numerous chips on body overall; some large ones on underside and a large chip on the side; handle edges have suffered the most significant chipping loss. Glaze is crackled overall and has some staining, particularly on the interior. Feet are moderately worn.
Object ID
G.98.12.17
Place of Origin
Pennsylvania
Credit
Gift of Mrs. S.R. Slaymaker II, Heritage Center Collection
Coffepot (A) and lid (B) of blue transfer-printed pearlware. On a pedestal base is an octagonal pear-shaped body flaring back out at recessed rim. Gooseneck spout with cap at tip. High arching handle of C-scrolls. Domed octagonal lid has an octagonal knop/finial and tiny vent hole.
Transfer decoration is a Chinese scene with people, trees, water and pagoda with bridges. Additional decoration at top and base is a filigree-edged band dominated by 3-leafed vine.
Large redware pitcher, sectioned octagonal form with conforming low pedestal base. Applied handle and pulled pouring spout. Orange-red color dark brown manganese mottling with clear glaze overall.
Impressed mark on underside is "C GAST" for Conrad Gast (1813- after 1880).
Prince and James Sts. Lancaster, PA
Provenance
Heritage Center purchased from Ruth Rogers of School House Farm Antiques, New Holland.
Wear at all salient points of the lower body as well as the outside and tip of handle. Two medium chips at opposite sides of lip and several minor chips at spout and sides of lip. Wear at bottom.
Object ID
P.02.04.1
Place of Origin
Lancaster
Credit
Gift of V. Ronald Smith, Heritage Center Collection
Saltcellar of Stiegel-type clear glass, blown into a 3-piece mold. Body is an inverted pear form on a pedestal base. Upper body decorated with 25 slightly slanted vertical ribs. Bottom is slightly concave with pontil mark at center.
Provenance
Donor bought cellar for $70.00 at Horst Auction on 10-19-96, from the collection of Edward Miller.
Small plate, used as a paten (communion plate). Circular, with single reed brim, marked on bottom with initials "I.CH." and Jacobs touch #169. Double incised lines near brim and single incised line within sunken bottom.
Pewter flagon, one of a pair, made by Heyne and presented to the Warwick Congregation (now the Brickerville United Lutheran Church) for use as part of a communion service. Cylindrical tankard form of top half joins a bottom section that begins to swell until it flares out dramatically at bottom. Has three applied cherub's head feet bordered with wrigglework. Applied spout. Heyne then innovated by departing from German forms by using three English features: an applied hollow handle, a double-domed lid and an erect chairback thumbpiece.
At midline below three raised bands is an engraved two-lobed crown above large initials "MH" filled with wrigglework. Underside is stamped with Heyne's mark, a crown over the initials "ICH", and "LANCASTER" below. Undated, although the other flagon of this pair is marked "1776" on bottom.
Johann Christoph Heyne was working on West King Street in Lancaster Borough, 1752-1781.
Provenance
Possibly commissioned from Heyne by William and Mary Huber of this congregation and presented to the church with their initials.
Pewter flagon, one of a pair, made by Heyne and presented to the Warwick Congregation (now known as the Brickerville United Lutheran Church) for use as part of a communion service. Cylindrical tankard form of top half joins a bottom section that begins to swell until it flares out dramatically at bottom. Has three applied cherub's head feet bordered with wrigglework. Applied spout. Heyne then innovated by departing from German practice by using three English features: an applied hollow handle, a double-domed lid and an erect chairback thumbpiece.
At midline below three raised bands is engraved a two-lobed crown above large Roman initials "WH" filled with wrigglework. The underside of flagon is stamped with a crown over the initials "ICH". Below this is stamped "LANCASTER" and to the right is engraved "1766".
Johann Christoph Heyne was working on West King Street in Lancaster Borough, 1752-1781.
Provenance
Pair of flagons possibly commissioned from Heyne by William and Mary Huber of this congregation and presented to the church with their initials. Remained in use over the years until the congregation decided in 1997 to find a safe place for this valuable communion set.
Note: Another pair of flagons was ordered from Heyne in 1766 by Trinity Lutheran Church. Heyne also used the English round, hollow handle on those. However, that pair differs from ours, and all other later Heyne flagons, in that he incorporated the English style double domed lid and erect thumbpiece.
Overall wear: abrasions, nicks and dents. Dents on lid top. Large scratch at lower right of "H" Dark stains and small pinhole in thumbpiece. Interior has several small areas of deep scratches.
Object ID
P.97.08.2
Place of Origin
Lancaster
Credit
Acquired through the generosity of the James Hale Steinman Foundation and Friends of the Heritage Center Museum, Heritage Center Collection
British quart-size pewter tankard, part of the Warwick Congregation's (now known as the Brickerville United Lutheran Church) communion service.
Straight-sided body with raised band below center; molded base. Hinged domed lid with erect thumbpiece and C-scroll handle. Applied to front of tankard is a cast decorated portrait medallion with the profiles of a man and a woman facing each other with a crown above their heads. Encircling the pair are the words: "LONG LIVE PRINCE AND PRINCESS OF ORANGE". The medallion commemorates the Prince of Orange (William III) and his wife Mary Stuart, daughter of Charles I of England. The couple ruled England as joint sovereigns 1689-1702.
Provenance
The entire communion service remained in use over the years until the congregation decided in 1997 to find a safe place for this valuable communion set. Purchased by the Heritage Center of Lancaster County.
Diameter of bottom is listed. Diameter of top is 4".
Condition
Good
Condition Date
2014-08-28
Condition Notes
Overall abrasions and staining. Cracked where handle is attached at top. Inside pitting. Some cracks on inside of lid's rim. Large dent above medallion.
Object ID
P.97.08.4
Place of Origin
England
Credit
Acquired through the generosity of the James Hale Steinman Foundation and Friends of the Heritage Center Museum, Heritage Center Collection
Brass spoon mold of two parts that mate to allow molten metal to be poured into bowl end of spoon mold via its funnel opening. Squared tangs project on top and bottom of mold at midpoint.
Mold will create spoon with moderately large, oval bowl, round stem and flaring, flattened handle with rounded terminal and raised center ridge on top. Rattail support under bowl.