Needle cleaner, painted cut velvet and paper, emery sand within. Rectangular box shape; sides slope in to smaller base. Padded top covered with yellow velvet decorated with painted green flowers. Sides and base covered with a glossy tan paper.
Laid paper label pasted onto bottom has handwritten inscription in ink: "Magdelena Andrews (Ressler) received this needel(sic) cleaner in 1825 when three years of age then in 1895 gave it to her granddaughter Clara Aument."
Compare similar needle cleaner 2002.004
Lancaster County, possibly Colerain Twp.
Provenance
Inscription indicates origin as a gift to 3-yr-old Magdalena Andrews (19 Sep 1822 - 24 Nov 1897), daughter of Joseph and Marie (Mary) Andrews. Magdalena married Martin Boehm Ressler, a farmer in Strasburg. Their daughter Annie married H. Elmer Aument and had a daughter Clara P. Aument (1892 - 1974), unmarried & a clerk in Lancaster City. The needle cleaner was given to granddaughter Clara in 1895, two years before Magdalena's death. Finally given to museum by unknown donor.
Wear, soil and fading overall. Small losses of velvet. Paper is cracked, soiled and worn.
Object ID
G.87.08
Notes
Andrews family were early settlers in Colerain Twp., including a Joseph Andrews - see Ellis & Evans pp. 728, 732, 733. Census 1810-1850 show a Joseph Andrews in Colerain Twp. The 1850 Census shows Joseph & Mary in Strasburg, living next to daughter Magdalena family (Martin Ressler).
Place of Origin
Lancaster County
Credit
Courtesy of LancasterHistory, Lancaster, Pennsylvania.
Clock wheel cutting machine used by Lancaster clockmaker Martin Shreiner, Sr. Made of steel and brass with turned wood handle knob on crank. Main frame of tool is steel resting on four rounded, downward-curving legs with coin-shaped feet. Many moving parts, arms and cranks/screws, including the swiveling cutting yoke/frame at top (cutter blade with arbor/spindle missing) and the shaped index arm that "reads" the holes on the 13"-diameter brass wheel furnished with concentric circles of surface holes.
The LaFonds call this a very sophisticated machine, incorporating Swiss, German and English ideas/influences. This indicates to them that the machine was made in America, very likely by Shreiner himself. It was imperative for clockmakers to own this tool to practice their trade. Few survive. This machine was first described in the early book or article (LCHS Bulletin) printed in 1917(or 1919) & 1939 by D. McGee who wrote about Lancaster clockmaking. Ed believes this machine to be "the finest American engine in existence" and that it very well may have been made by Shreiner, probably in the 1790s. The cutter blade was used to cut the teeth on the large brass wheels that turn the pinions. There would have been either a slitting cutter or a form cutter used. Carter Harris says form cutters were used by the 1790s.
Attributed to Martin Shreiner (1769-1866).
An 8x10 B&W photo is in picture file under "clocks." Also slide is in slide collection, #14-3-11.
Lancaster Borough, most likely
Provenance
Owned by two brothers, Samuel K. and William L. Fraser, clockmakers who lived in Lincoln (just west of Ephrata) and grandsons of clockmaker William Fraser (1801-1877), then to early collector Earl T. Strickler (FNAWCC) who had it on display at the Columbia Clock and Watch Museum. Upon Strickler's sudden death circa 1974, it was sold by his widow, Mary Jane Strickler, to Edward F., Jr. and Virginia A. LaFond who removed rust and kept it on a window sill. They then traded it to dealer Jamie Price for some clocks. Price had it on sale at the 2004 Philadelphia Antiques Show in mid-April where, as representative for the von Hess Foundation, Tom Cook, purchased it for this museum's collections.
Ed LaFond believes the Fraser family was related to the Gorgas family, thus they were in a position to inherit tools. Due to this, it was believed at first that both the machine and the scribe were from the Gorgas family. However, LaFond believes the Frasers were also related to the Shreiners. Stacy Wood claims this machine was one of Martin Shreiner's tools (Vol. 96, LCHS Journal).
Pitting on steel surfaces, slight discoloration on brass parts, signs of wear overall.
Object ID
G.04.19.1
Notes
Information from: Clockmakers of Lanc. Co., Wood/Kramer, 1977, p. 142. 225 Years of Timepieces (Catalog of 1st Annual Exh. of NAWCCM, 1979), p. 63. Stacy Wood researched origins and provenance of these tools and wrote article in Vol. 96 #4 of LCHS Journal. Conversations with Virginia LaFond ( 5/19/04), Ed LaFond (7/6/04) and Carter Harris (7/7/04).
Place of Origin
Lancaster
Usage
Shreiner, Martin
Credit
Gift of the Richard C. von Hess Foundation, Heritage Center Collection
Tall case clock w/ 8-day movement housed in a cherry Chippendale style case with scroll pediment, carved floral rosettes and three flame finials. Arched glass door and side lights. Partially engaged, smooth columns at front corners, forming part of the hinged door.
Brass dial has Roman numeral chapter ring, C-scroll and vining foliate engraving at spandrels as well as above and below moon wheel which is painted with a star-spangled sky and moon with face. Engraved "Wilton Atkinson" on lower dial.
Waist has broken arch door and recessed, plain quarter columns. Base has raised, scalloped panel at front with quarter columns that match those in the waist section. Feet are bold ogee bracket style.
Atkinson is believed to have been the son of Matthew Atkinson of Lampeter Twp. Wilton was in the Borough as early as 1763 as a cutler. In tax records, he was listed in 1770 as a watchmaker and in 1772 and 1773 as a clockmaker. He married Anna Maria, daughter of the early Borough clockmaker Abram Laroy. Legend states that Anna Maria also made clocks in Lancaster that were sold bearing her husband's name. The Atkinsons eventually moved to Baltimore where, following his death, Anna Maria conducted business until 1819. (Clockmakers of Lanc. Co.)
Snyder notes on p. 40 of Clockmakers of Lanc. Co, that this case is considered one of the earliest examples of the Chippendale style in Lancaster Co., based on the brief working career of Atkinson (1770-1773).
Provenance
Owned by Dr. George Rohrer, then to son Henry A. Rohrer, then to daughter Mary Louise Webster. Tape adhered to reverse side of dial has the name of the donor's father, "Henry Rohrer/ 9-22-87."
Case has been overcleaned, finished with a glossy varnish then handrubbed with steel wool to remove gloss. Vertical scratch on right side of base; feet marred. Crack at lower right corner of base, below raised panel. There are about nine nail holes over the expanse of the tympanum suggesting missing carving. Heavy dent on dial at left edge, center, and hammer marks at this point on reverse side. Lower left corner distorted.
Object ID
G.01.49.1
Notes
Entry for Wilton Atkinson in "Clockmakers of Lancaster Co. and Their Clocks 1750-1850" notes that: "Atkinson married Anna Maria, a daughter of the early Borough clockmaker Abrum Laroy and legend states that she also made clocks in Lancaster that were sold bearing her husband's name. "
Brochure of the First Reformed Church (UCC) notes that in the 1760s, "the French Laroys" belonged to this church. "One chronicler called the LeRoy sisters (four daughters of a local clockmaker) the 'Belles of the congregation.'... Anna Maria, the youngest of the sisters, learned her father's trade and was said to be 'as good a clockmaker' as he was. She and her husband, Wilton Atkinson, took over the family business." (Note: Abrum Laroy died in 1763).
Above brochure is http://visithistoricalancaster.com/pdf/02LP109 HOW-FR-UCC
Call to church office & conversation with paster Dana Schlegel offered no clues to source of above information (Jan. 2017).
Place of Origin
Lancaster
Credit
In memory of Dr. George Rohrer and Mrs. & Mrs. Henry A. Rohrer by Mary Louise Webster, Heritage Center Collection
Copper teakettle with round body, gooseneck spout, very low domed lid w/ scrolled knob of sheet copper riveted onto lid with a hand-cut washer added under lid, suggesting repair or replacement. Curved handle hinges onto tapered plinth tab bases with two rivets each. Vertical dove-tailed side seam opposite single-seamed spout. Dove-tailed bottom.
Touchmark on top of handle is "R..REED." within a rectangular reserve with serrated ends.
Made by Robert Reed, working in Lancaster 1771-1779, then 1785-1795.
Provenance
Purchased by Heritage Center from Philip Bradley Antiques
Transferred from Heritage Center to LancasterHistory.org December, 2012.
Tax assessment lists Robert Reed 1786-1793.
Kauffman, Henry J. American Copper and Brass. New York: Bonanza, 1979.
Coppersmith info from Shelley Horvath Posten (dau. of Don Horvath), 2009
Copper dented and scratched overall, polish residue at handle hinges. Side handle break repaired with sheet iron patch secured to outside with two iron rivets. Knob appears to be a repair or a replacement.
Object ID
P.80.131
Place of Origin
Lancaster
Credit
Heritage Center Collection. Purchased through the generosity of the James Hale Steinman Foundation,
Large copper teakettle with rounded body, goose-neck spout and hinged handle having a medium arc, mounted on shaped flanges with three rivets. The domed lid has a small brass mushroom knob (replaced). Dovetailed seams on bottom and vertical seam on side opposite spout. Seamed repair to spout tip.
"F. STEINMAN" is stamped on the handle within a reserve.
Provenance
Transferred from Heritage Center Collection, Dec. 2012
Jack Brubaker, The Steinmans of Lancaster, pp. 11-15.
HJ Kauffman, Early American Copper, Tin & Brass, 1995, pp. 42-43.
HJ Kauffman, American Copper & Brass, 1979, p. 65.
Height (in)
13
Width (in)
16
Condition
Good
Condition Date
2013-11-13
Condition Notes
Many dents and overall wear. HJK says handle slightly shortened (likely done by him). Tip of spout replaced. Plugged hole in bottom. Replaced knob. Stamped name very worn. Tarnished with polish residue where the spout, handle, and lid meet the main body.
Object ID
G.77.14
Notes
When his father died in 1758, John Frederick Steinman, Sr. (1752-1823) moved with his mother to Lititz from his birthplace, Bethlehem, Pennsylvania. His mother remarried a few years later to John Christophe Heyne, a tinsmith and pewterer from Lancaster. The shop of Heyne and Steinman would become known as Steinman's Hardware Store, the oldest hardware store in America.
Place of Origin
Lancaster
Credit
Heritage Center Collection. Gift of Henry J. Kauffman
Strainer of glazed redware, but with a lighter brown color than most redware. Resting on three tapered 1-1/8 " long feet. The flat-bottomed dish has straight sides that flare out to a molded, high lip. Applied handles at sides. Large holes in bottom and three rows of smaller holes at sides.
Lead glaze overall with some streaks/runs of a darker brown.
Numerous chips on body overall; some large ones on underside and a large chip on the side; handle edges have suffered the most significant chipping loss. Glaze is crackled overall and has some staining, particularly on the interior. Feet are moderately worn.
Object ID
G.98.12.17
Place of Origin
Pennsylvania
Credit
Gift of Mrs. S.R. Slaymaker II, Heritage Center Collection
Redware canning jar, ovoid shape with no handle. Pronounced foot ring and rounded flaring lip with recessed interior to receive a fitted lid (missing). Dark brown manganese decoration with some mottling, streaks and dark spatters. Lead glaze overall except for underside.
Very strong wear with losses. Lip has very large chip and one very small chip at outside edge. Strong losses of glaze at lip. Very strong abrasions at salient point of side, with considerable scattered scratches. Foot ring has three large chips and one very large chip. Soil on inside and underside.
Object ID
G.99.22.1
Place of Origin
Pennsylvania
Credit
Gift of Drs. Irwin and M. Susan Richman, Heritage Center Collection
Glazed soft paste porcelain Gaudy Dutch teapot (A) with lid (B). Handpainted "Butterfly" pattern decoration on pale blue body of pearlware. Squat ovoid body sits on a low footring; body swells most in lower half. Collar extends outward below an oblong mouth fitted with conforming domed lid with oblong knob finial . Spout has minimal molding as does arching applied handle.
Provenance
Collected by Harpo and Susan Marx during visits back East from CA. Donated to Heritage Center.
Overall strong staining, especially at lower spout and base section and interior. Strong hairline cracks throughout base and bottom, with resulting staining. Scratchon butterfly wing. Chip on underside of spout tip. Long split/crack on handle back, perhaps from firing. Coloring is very uneven at multiple places, sometimes creating a mottled effect. Wear and soil under foot ring.
Object ID
G.98.51.03a-b
Place of Origin
England
Credit
Given in memory of Harpo by Susan Marx, Heritage Center Collection
Glazed soft paste porcelain Gaudy Welsh sugar bowl (A) with lid (B). Handpainted inverted tulips of red and yellow are interspersed with 3 large, dominating deep blue scalloped motifs decorated with copper lustre painted floral decoration. Squat pot-bellied body sits on a low squarish pedestal with scalloped edging. Two molded angular applied handles. Top has round mouth with flared collar extends outward. Domed lid has squarish molded knob finial. Darkened remnant of paper sticker with blurred writing, perhaps "-caster/ --ea set/ --1825."
Provenance
Collected by Harpo and Susan Marx during visits back East from CA. Donated to Heritage Center.
Chinese export bowl of high fired porcelain, polychrome decoration under glaze. Thin walled in nearly hemispherical form sitting on a 3/4" raised foot. Gold-painted rim with red edging. Two goldfish inside bottom. Continuous landscape on exterior is the same repeating Roman or Greek scene of a seated half-robed seated man with dog facing three nude women and seated baby. All set against distant mountains and one tree in foreground.
Saltcellar of Stiegel-type clear glass, blown into a 3-piece mold. Body is an inverted pear form on a pedestal base. Upper body decorated with 25 slightly slanted vertical ribs. Bottom is slightly concave with pontil mark at center.
Provenance
Donor bought cellar for $70.00 at Horst Auction on 10-19-96, from the collection of Edward Miller.
Cup (A) and saucer (B), glazed soft-paste porcelain, Strawberry pattern. Handleless cup has straight flaring sides & rests on a small foot Paint decoration on white ground has 2 strawberries & a large green leaf on each side with smaller leaves, purple roses and brown squiggles. Interior has double stripe with berries and flowers. Rim painted rust.
Saucer (B)
Provenance
Collected by Harpo and Susan Marx during visits back East from CA. Donated to Heritage Center.
Small free-blown wine or dram glass, Stiegel type. Conical form. Low profile knop on stem. Round pedestal base with concentric ring created by folded foot. Pontil mark on bottom.
Provenance
Purchased by donor Hampton C. Randolph, Sr., for $65 at the sale of the Henry E. Balmer estate, Lancaster, PA on April 20, 1996, then donated to the Heritage Center of Lancaster County.
Clear, free-blown leaded glass mug, near barrel shape. Stiegel-type glass has bubbles and other imperfections throughout. Applied threading at rim; ribbed loop handle; engraved design on side is a bird with floral and foliate designs. Pontil mark on bottom has been smoothed around edges with grinding wheel.
Similar to #5, plate 35 in "American Glass" by George and Helen McKearin.
Provenance
Descent within the Nichols family of Lancaster Co. Family history states mug was always kept in a decorated dower chest, dated 1808.
Clear mold-blown Stiegel-type glass mug in cylindrical form. Bottom quarter has 14 fluted ribs that carry through to the bottom and converge on the pontil mark. Rim edged with gold. Side has multicolored fruit and floral paint decoration with a central orange oval cartouche outlined in gold with gold cursive lettering: "Remember me." Applied handle.
Provenance
Descent to Sarah Muench from family, likely her Aunt Alice Potter Fordney, an antiques dealer.
Small plate, used as a paten (communion plate). Circular, with single reed brim, marked on bottom with initials "I.CH." and Jacobs touch #169. Double incised lines near brim and single incised line within sunken bottom.
British quart-size pewter tankard, part of the Warwick Congregation's (now known as the Brickerville United Lutheran Church) communion service.
Straight-sided body with raised band below center; molded base. Hinged domed lid with erect thumbpiece and C-scroll handle. Applied to front of tankard is a cast decorated portrait medallion with the profiles of a man and a woman facing each other with a crown above their heads. Encircling the pair are the words: "LONG LIVE PRINCE AND PRINCESS OF ORANGE". The medallion commemorates the Prince of Orange (William III) and his wife Mary Stuart, daughter of Charles I of England. The couple ruled England as joint sovereigns 1689-1702.
Provenance
The entire communion service remained in use over the years until the congregation decided in 1997 to find a safe place for this valuable communion set. Purchased by the Heritage Center of Lancaster County.
Diameter of bottom is listed. Diameter of top is 4".
Condition
Good
Condition Date
2014-08-28
Condition Notes
Overall abrasions and staining. Cracked where handle is attached at top. Inside pitting. Some cracks on inside of lid's rim. Large dent above medallion.
Object ID
P.97.08.4
Place of Origin
England
Credit
Acquired through the generosity of the James Hale Steinman Foundation and Friends of the Heritage Center Museum, Heritage Center Collection
Pewter beaker or handleless cup. Part of the Warwick Congregation's (now known as the Brickerville United Lutheran Church) communion service.
Cylinder form flares out slightly at bottom as well as top. Banded at base.
Engraved on the exterior, near top, are the small initials "M.W."
Provenance
The entire communion service remained in use over the years until the congregation decided in 1997 to find a safe place for this valuable communion set. Purchased by the Heritage Center of Lancaster County.
Diameter of bottom is listed. Diameter of top is 2.5".
Condition
Good
Condition Date
2014-08-28
Condition Notes
Overall abrasions, pitting, small dents and staining. Rim has multiple small dents and abrasions. Bottom interior is pitted. Wear underneath with some areas slightly cracked. Dent at base.
Object ID
P.97.08.5
Place of Origin
Hartford, Connecticut
Credit
Acquired through the generosity of the James Hale Steinman Foundation and Friends of the Heritage Center Museum, Heritage Center Collection
Pewter basin, part of the Warwick Congregation's (now known as the Brickerville United Lutheran Church) communion service.
High, rounded sides flare out to a flattened rim with rolled edge. Booge appears to be unhammered. Barns struck his large circular mark with an eagle on the inside of bottom. The left portion of the eagle as well as the letters "BAR" on the bottom are discernible, as well as the "HE" above the eagle.
Probably made in Middletown or Wallingford, Connecticut.
Provenance
The entire communion service remained in use over the years until the congregation decided in 1997 to find a safe place for this valuable communion set. Purchased by the Heritage Center of Lancaster County.