Chippendale style miniature blanket chest form. Mahogany-stained softwood, dovetail contruction, Lid with brass butt hinges, four ogee bracket feet. Edge molding on lid; chest bottom extends beyond sides to create look of molding. Interior till at left. All surfaces stained and glossy-varnished. Large brass batwing lock escutcheon; silvered key. Top of lid has central relief-carved cartouche incorporating the monogram of Frances Mayer Hershey "FMH" according to Clarke E. Hess. He believes chest was commissioned by Frances' grandparents Henry M. and Frances Mayer. Pencilled in cursive on bottom is "M. Mayer Rohrerstown." Frances' parents were Harry E. Hershey and Dora E. Mayer.
Attributed to Henry Slough, Sr. workshop.
Provenance
Descent from Frances Mayer Hershey to son Henry R. Outin. Purchased by Heritage Center at estate sale of Henry Outin of 2107 Wood St., Rohrerstown, held by Shaub at Willow Street Fire Hall. According to Clarke E. Hess, Outin died just a few months before the Sept.sale. He was the only child of Frances Mayer Hershey and her French husband, (?) Outin. Clarke recalls this couple lived in Algiers and perhaps other places abroad. Frances M. H. Outin left America with her husband in 1928, putting all her belongings in storage until she returned as a widow in 1967, at wich time Hess Builders built a home for her behind the Rohrerstown Mennonite Church. Mrs. Outin died later at age 92.
Lid is strongly abraded, notably a large oblong outline. Minor wear and abrasions overall. Several small cracks at left front at dovetails and a 2 3/4" long crack at midline. Interior abraded and scarred with accretions.
Object ID
P.00.38.1
Place of Origin
Lancaster
Credit
In memory of Anne Bausman Woodcock by Sally Slaymaker & Caroline S. Nunan
Cast-iron toy tri-motor Fokker aquaplane, painted yellow. Made of multiple castings fitted and securred with screws. Three wire spring cables are fitted to pulleys under plane, allowing the 4 rubber wheels to turn the 3 propellers and activate a noisemaker. Raised letters atop wings spell "FRIENDSHIP". "NX4202" is on tail and "Fokker" is on left side of fuselage. All letters painted blue. Inside hollow fuselage is "HUBLEY." Gold seal on left end of wing reads "It's a Hubley Toy". Profile of Earhart is cast into one of the two rear windows on left side.
The Friendship was flown across the Atlantic from Newfoundland to Wales, on June 17, 1928, with Amelia Earhart aboard. She was only a passenger, but this event won her immense fame, including a ticker tape parade in New York City, and started her career as a major celebrity. (see Notes on why this plane was made.)
Provenance
Plane was given to donor by his friend Charlie Reiger (sp?).
Moderate overal loss of paint; rust on exposed metal; cracking rubber on wheels.
Object ID
G.88.9
Notes
Hubley Mfg. Co. was commissioned by Pittsburgh industrialist Arthur E. Braun (1876-1976) to make 22 yellow aquaplanes modeled on Earhart's Friendship. Earhart signed each one and Braun gave the planes out as gifts at a reception in honor of Earhart, held at his own residence in Pittsburgh in June of 1929. This plane is unsigned, suggesting perhaps that this example may have been a factory extra.
In 1932, Earhart flew solo across the Atlantic, again achieving acclaim as the 2nd person and 1st woman to do so. She received the Distinguished Flying Cross from Congress, the gold medal of the National Geographic Society and the Cross of the Legion of Honor from France.
Place of Origin
Lancaster
Credit
Gift of Samuel S. Snyder, Heritage Center Collection
Flat shaped tool is constructed of two sheet brass sides riveted together at the handle end, allowing a flat triangular iron blade that is sandwiched between to slide out at the other end for cutting. Blade slides via a small riveted guide that slides along a slot in the brass sides. Cutter's brass sides have a fleur-de-lis-shaped handle and scalloped sides and each slot has a measuriing scale numbered from one to ten.
Inscription: The sliding guide on both sides of the slot reads "D.M.CO. / PAT SEPT. 3, 72 / BPT.CONN."
Provenance
Collected by Lillian Hollings Kiker, born to Scottish Americans who lived in New Jersey. Born (1912) and lived in New Jersey, last of Egg Harbor, she was active with quilting, sewing, knitting & crocheting. Collection inherited by donor when her mother passed away.
Button-hole cutter, creaser or marking tool is silver plated ferrous metal.
In form of a miniature spoon with a blade instead of a bowl. Blade is eye-shaped with raised midline extending from tip to tip. Edges of blade are fairly sharp. Handle end has the bust of a crowned femal monarch with long flowing hair and necklace above a decorative base of scrolls surrounding a cabochon. Shaft of tool is similar to an architectural column. Entire handle is made of two identical halves, cast and joined with side seams visible.
Provenance
Collected by Lillian Hollings Kiker, born to Scottish Americans who lived in New Jersey. Born (1912) and lived in New Jersey, last of Egg Harbor, she was active with quilting, sewing, knitting & crocheting. Collection inherited by donor when her mother passed away.
Some tarnish overall. Large dent in one cabochon and small dent in the other.
Object ID
G.05.15.19
Notes
See another example of this ring found on internet in this file. Iguala is a town near the renowned silvermaking town of Taxco (near the west coast of Mexico) where William Spratling, in the 1930s, famously reinstituted the silver industry and craftsmanship that had died centuries before.
Credit
Gift of Susan Garofola in memory of Lillian Kiker (mother), Heritage Center Collection
Tatting hook of bone handle shaft of iron hook set into smaller end.
Tool has handle of elongated teardrop shape, somewhat flattened in cross-section. Wire-like shaft with rounded hook on tip is set into handle. Shaft is thicker than hooked end.
Provenance
Collected by Lillian Hollings Kiker, born to Scottish Americans who lived in New Jersey. Born (1912) and lived in New Jersey, last of Egg Harbor, she was active with quilting, sewing, knitting & crocheting. Collection inherited by donor when her mother passed away.
Set of tatting tools, nickel silver plated steel, has four pieces. Each piece has in common the shaped and decorated portions, the handles of the three tools and the needle case body. This feature is a flattened octagonal shape in cross-section, with successive divots ground out with a round grinding wheel. Handles and case all taper along their length.
A. Needle case is 2.75" long and .375" wide. At the heavier end of case is a fitted cap that slides onto a smaller male extension protruding from main body. Seam visible along sides where both halves of case have been joined.
B. Hook on handle is 4" long and .25" wide. Tapers from handle end down to where shaft is attached. Shaft has ball-and-ring at handle, a slight swell along length and a minute hook at tip.
C. Awl is 3.625" long and .25" wide. Same handle as above. Shaft is similar in shape except heavier and shorter and has a sharp tip.
D. Threading tool(?) is 3" long and .5" long. Same handle as above. Shaft is shorter and has a large open loop in a teardrop shape.
Provenance
Collected by Lillian Hollings Kiker, born to Scottish Americans who lived in New Jersey. Born (1912) and lived in New Jersey, last of Egg Harbor, she was active with quilting, sewing, knitting & crocheting. Collection inherited by donor when her mother passed away.
Set of 3 steel tatting hooks, no handles. All are similar with round, tapering shanks that terminate in tiny hooks of differing sizes. Theaded at other end for fitting into a handle, now missing. Double ring turnings adjacent to threads.
Provenance
Collected by Lillian Hollings Kiker, born to Scottish Americans who lived in New Jersey. Born (1912) and lived in New Jersey, last of Egg Harbor, she was active with quilting, sewing, knitting & crocheting. Collection inherited by donor when her mother passed away.
Birth & baptismal certificate on laid paper. Printed form with central textblock in German within a multiple line border. Infilled and decorated around textblock by Speyer; cross-legged angel at top, pelicans feeding young at sides and flowers at sides and bottom. Watercolors are red, blue, yellow, green and brown.
Infilled for Johannes, son of Valiendein (Valentine) and Eliesabetha (Elisabetha) Bohmer of Brecknock Township in Lancaster Co., born Dec. 13, 1788.
Georg Friederich Speyer (active 1774-1801) used this printed form produced c. 1789 by Barton & Johnson of Reading. See Notes.
General wear with numerous creases and wrinkles; one pronounced vertical centerline crease. Repaired tears, esp at left edge. All edges are ragged and uneven, esp. at right.
Conserved by CCAHA in 1989 (see report in file). Hinged into window mat & back mat. Relaced in its original frame using UF-3 Plexiglas and acid-free cardboard on reverse with a taped mylar dust shield.
Object ID
G.77.50.1
Notes
Printed form by Reading printers Thomas Barton and Benjamin Johnson, circa 1789 (see Klaus Stopp, The Printed Birth & Baptismal Certificates of the Pa. Germans, v. 4, p. 84). Speyer used this printed form for Johannes Bohmer who was born the previous year in1788.
Place of Origin
Lancaster County
Role
Artist
Credit
Gift of Mr. & Mrs. Richard Flanders Smith, Heritage Center Collection
Birth certificate done in German for "Anna Schenkin" (Schenk), born in "Connostoge Taunschip Langster County", November 20, 1783. Hand drawn, colored and lettered on laid paper with iron gall ink. No baptism indicates a Mennonite family.
The text is enclosed within a heart, surrounded by various vining flowers and four birds, two above and two below. The design conforms with artist's normal pattern of having the vines emanate from a hole at the top center of the heart. This artist made fraktur for mostly Lancaster County Mennonite families. He was almost certainly a schoolmaster. There are about 15 of his fraktur that are documented.
"Johannes Schopf/Schopp Artist" (active c. 1774-1800)
Note written on frame's dust cover by Smith states this fraktur was exhibited in two shows: Allentown Folk Art Show (Nov. 1974) and William Penn Memorial Museum, F/A Show (Jan. 1975).
Slide #27-2-4 in Archives West.
Provenance
Purchased by Richard Flanders Smith at a public sale along Route 222, north of Willow Street. Given to the Lancaster County Historical Society with the understanding that it would become part of the Heritage Center collection with the establishment of that institution.
Foxing or brown spotting over much of surface. Some tears along the edges. Moisture or adhesive stain at bottom center.
A condition report and treatment proposal was done by the Conservation Center for Art and Historic Artifacts in Philadelphia in 1986. Matted and framed by conservator Brian Howard of Carlisle in 1996.
Object ID
G.77.50.11
Place of Origin
Conestoga Twp.
Credit
Gift of Mr. & Mrs. Richard Flanders Smith, Heritage Center Collection
Framed vorschrift on laid paper with German text penned on both sides with dark iron gall ink. Paper is folded with two strong creases, creating four quarters of the sheet. Half of "front" side contains illuminated vorschrift with four letter styles.
Top line in very large, ornate letters reads, "Wohl dem der..." Initial letter "W" is oversize and decorated with scrolling acanthus leaves. Arching over this line is a horizontal vine with flowers and pomegranate. The religious text in script ends with what appears to be Psalm 112. It ends with a final line in fraktur lettering reading, "Heinrich Miller, in Canastogen Townschip, Anno 1782."
One quarter of same side states, "Vorschrift Vor Heinrich Miller, in Canastogen Townschip, den 5ten Martz, Anno 1782."
Reverse side has a text in German script framed with a lined border. It has ten lines including numbers and alphabet, and it ends with the same line as above, "Heinrich Miller, in Canastogen Townschip, 1782."
Fraktur scholar David Johnson identified this artist as Friedrich Hartman, likely a schoolmaster. Hartman is found on no records but the 1790 Census, in Conestoga Twp., suggesting that he owned no property. Other Hartman pieces were found in the 1986 Fraktur Harvest (see this file).
This vorschrift relates closely to work done in northern Lancaster County near Ephrata Cloister although the artist is not known to have had connections in that community.
Provenance
HC purchased at Scott's sale through Christie's for $1265.00, Jun 11, 1994. This piece was likely collected by Scott in his usual manner, purchase at sale in Lancaster Co. or region.
Mounted in frame folded in half: H: 8.25" W: 13.125"
Frame is H: 16.25 W: 19.25"
Condition
Good
Condition Date
2016-10-24
Condition Notes
Overall soil with many stains. Edges are ragged, a 2-inch-long sections is cut from one corner. There is breaking at creases and losses where heavily inked. Paper loss where crease coincides with lettering as well as tulip-shaped flower.
Matted and framed by Carlisle conservator Brian Howard in 1996.
Object ID
P.94.13.3
Notes
This fraktur is recorded in the Winterthur Library: Decorative Arts Photographic Collection, NEH 475, 17-19 (per Christie's)
Pictured on p.15, of Fraktur: Folk Art & Family by Corinne & Russell Earnest.