Needle cleaner, painted cut velvet and paper, emery sand within. Rectangular box shape; sides slope in to smaller base. Padded top covered with yellow velvet decorated with painted green flowers. Sides and base covered with a glossy tan paper.
Laid paper label pasted onto bottom has handwritten inscription in ink: "Magdelena Andrews (Ressler) received this needel(sic) cleaner in 1825 when three years of age then in 1895 gave it to her granddaughter Clara Aument."
Compare similar needle cleaner 2002.004
Lancaster County, possibly Colerain Twp.
Provenance
Inscription indicates origin as a gift to 3-yr-old Magdalena Andrews (19 Sep 1822 - 24 Nov 1897), daughter of Joseph and Marie (Mary) Andrews. Magdalena married Martin Boehm Ressler, a farmer in Strasburg. Their daughter Annie married H. Elmer Aument and had a daughter Clara P. Aument (1892 - 1974), unmarried & a clerk in Lancaster City. The needle cleaner was given to granddaughter Clara in 1895, two years before Magdalena's death. Finally given to museum by unknown donor.
Wear, soil and fading overall. Small losses of velvet. Paper is cracked, soiled and worn.
Object ID
G.87.08
Notes
Andrews family were early settlers in Colerain Twp., including a Joseph Andrews - see Ellis & Evans pp. 728, 732, 733. Census 1810-1850 show a Joseph Andrews in Colerain Twp. The 1850 Census shows Joseph & Mary in Strasburg, living next to daughter Magdalena family (Martin Ressler).
Place of Origin
Lancaster County
Credit
Courtesy of LancasterHistory, Lancaster, Pennsylvania.
Weathervane constructed in shape of rooster of painted sheet iron with hand forged hinges. "1759" cut out from center. Streaks of paint to represent feathers on tail and from neck. Yellow beak and red comb and chin.
From old hotel on the Lincoln Highway east of Lancaster, PA. Purchased at the sale of the estate of the Misses Metzger by donor.
Tinned sheet iron coffeepot with band handle and straight tube spout. Painted decoration with floral design in yellow, green, red and with a yellow border at top. Marked, "624" on the interior of the lid. Pressure adhesive label on bottom reads, "No Acc No."
Painted sheet iron sander or pounce pot to sprinkle onto and absorb excess ink. Cylindrical form with pierced top and slightly concave base. Underside is marked, "S" in cursive hand. Painted black with overlay of a floral decorative band at top and yellow line at base.
Clock wheel cutting machine used by Lancaster clockmaker Martin Shreiner, Sr. Made of steel and brass with turned wood handle knob on crank. Main frame of tool is steel resting on four rounded, downward-curving legs with coin-shaped feet. Many moving parts, arms and cranks/screws, including the swiveling cutting yoke/frame at top (cutter blade with arbor/spindle missing) and the shaped index arm that "reads" the holes on the 13"-diameter brass wheel furnished with concentric circles of surface holes.
The LaFonds call this a very sophisticated machine, incorporating Swiss, German and English ideas/influences. This indicates to them that the machine was made in America, very likely by Shreiner himself. It was imperative for clockmakers to own this tool to practice their trade. Few survive. This machine was first described in the early book or article (LCHS Bulletin) printed in 1917(or 1919) & 1939 by D. McGee who wrote about Lancaster clockmaking. Ed believes this machine to be "the finest American engine in existence" and that it very well may have been made by Shreiner, probably in the 1790s. The cutter blade was used to cut the teeth on the large brass wheels that turn the pinions. There would have been either a slitting cutter or a form cutter used. Carter Harris says form cutters were used by the 1790s.
Attributed to Martin Shreiner (1769-1866).
An 8x10 B&W photo is in picture file under "clocks." Also slide is in slide collection, #14-3-11.
Lancaster Borough, most likely
Provenance
Owned by two brothers, Samuel K. and William L. Fraser, clockmakers who lived in Lincoln (just west of Ephrata) and grandsons of clockmaker William Fraser (1801-1877), then to early collector Earl T. Strickler (FNAWCC) who had it on display at the Columbia Clock and Watch Museum. Upon Strickler's sudden death circa 1974, it was sold by his widow, Mary Jane Strickler, to Edward F., Jr. and Virginia A. LaFond who removed rust and kept it on a window sill. They then traded it to dealer Jamie Price for some clocks. Price had it on sale at the 2004 Philadelphia Antiques Show in mid-April where, as representative for the von Hess Foundation, Tom Cook, purchased it for this museum's collections.
Ed LaFond believes the Fraser family was related to the Gorgas family, thus they were in a position to inherit tools. Due to this, it was believed at first that both the machine and the scribe were from the Gorgas family. However, LaFond believes the Frasers were also related to the Shreiners. Stacy Wood claims this machine was one of Martin Shreiner's tools (Vol. 96, LCHS Journal).
Pitting on steel surfaces, slight discoloration on brass parts, signs of wear overall.
Object ID
G.04.19.1
Notes
Information from: Clockmakers of Lanc. Co., Wood/Kramer, 1977, p. 142. 225 Years of Timepieces (Catalog of 1st Annual Exh. of NAWCCM, 1979), p. 63. Stacy Wood researched origins and provenance of these tools and wrote article in Vol. 96 #4 of LCHS Journal. Conversations with Virginia LaFond ( 5/19/04), Ed LaFond (7/6/04) and Carter Harris (7/7/04).
Place of Origin
Lancaster
Usage
Shreiner, Martin
Credit
Gift of the Richard C. von Hess Foundation, Heritage Center Collection
Copper teakettle with round body, gooseneck spout, very low domed lid w/ scrolled knob of sheet copper riveted onto lid with a hand-cut washer added under lid, suggesting repair or replacement. Curved handle hinges onto tapered plinth tab bases with two rivets each. Vertical dove-tailed side seam opposite single-seamed spout. Dove-tailed bottom.
Touchmark on top of handle is "R..REED." within a rectangular reserve with serrated ends.
Made by Robert Reed, working in Lancaster 1771-1779, then 1785-1795.
Provenance
Purchased by Heritage Center from Philip Bradley Antiques
Transferred from Heritage Center to LancasterHistory.org December, 2012.
Tax assessment lists Robert Reed 1786-1793.
Kauffman, Henry J. American Copper and Brass. New York: Bonanza, 1979.
Coppersmith info from Shelley Horvath Posten (dau. of Don Horvath), 2009
Copper dented and scratched overall, polish residue at handle hinges. Side handle break repaired with sheet iron patch secured to outside with two iron rivets. Knob appears to be a repair or a replacement.
Object ID
P.80.131
Place of Origin
Lancaster
Credit
Heritage Center Collection. Purchased through the generosity of the James Hale Steinman Foundation,
Round copper vessel, shaped like a teakettle, but without a spout. A shaped strap handle is attached to each side of the opening at shoulder with riveted brackets. The handle widens near the middle, where the maker's mark is stamped: "P & B. SCHAUM"
Body is dovetailed to base, one dovetailed vertical seam, handle attached to flanges held in place by two rivets each. Pot insert is missing. Another insert (S.13) was purchased as a replacement.
Vessel has multiple dents, creating a general distortion overall. Surface is also tarnished and has drip stains running down the sides. The bottom is very worn and has numerous stains. Blueish-white stains on the inside. Polish residue on handle.
Object ID
P.77.61
Place of Origin
Lancaster
Related Item Notes
See broadside for Benjamin Schaum's hardware store, P.91.02
Credit
Heritage Center Collection. Purchased through the generosity of the James Hale Steinman Foundation
Copper Teakettle has large 7-quart round body, domed lid with brass button knob attached to a metal base visible inside. Goose-neck spout. One vertical dove-tailed seam opposite spout, straight seam along top of spout and short seam underneath. Dove-tailed bottom. Arched handle hinged at chordal sector tab bases with three rivets each.
Maker's mark on top center of handle within serrated rectangular reserve: "7 JOHN.GETZ 7"
Made by John Getz (working 1801-1840).
Provenance
See 2009 materials sent by Shelley Horvath Poston (dau. of Don Horvath).
Copper has many dents and scratches. Significant 3 1/2" series of dents down the side opposite the spout and one under lid finial. Heavily soldered repair joint at base of spout.
Object ID
P.80.115
Place of Origin
Lancaster
Credit
Heritage Center Collection. Purchased through the generosity of the James Hale Steinman Foundation
Large copper teakettle with rounded body, goose-neck spout and hinged handle having a medium arc, mounted on shaped flanges with three rivets. The domed lid has a small brass mushroom knob (replaced). Dovetailed seams on bottom and vertical seam on side opposite spout. Seamed repair to spout tip.
"F. STEINMAN" is stamped on the handle within a reserve.
Provenance
Transferred from Heritage Center Collection, Dec. 2012
Jack Brubaker, The Steinmans of Lancaster, pp. 11-15.
HJ Kauffman, Early American Copper, Tin & Brass, 1995, pp. 42-43.
HJ Kauffman, American Copper & Brass, 1979, p. 65.
Height (in)
13
Width (in)
16
Condition
Good
Condition Date
2013-11-13
Condition Notes
Many dents and overall wear. HJK says handle slightly shortened (likely done by him). Tip of spout replaced. Plugged hole in bottom. Replaced knob. Stamped name very worn. Tarnished with polish residue where the spout, handle, and lid meet the main body.
Object ID
G.77.14
Notes
When his father died in 1758, John Frederick Steinman, Sr. (1752-1823) moved with his mother to Lititz from his birthplace, Bethlehem, Pennsylvania. His mother remarried a few years later to John Christophe Heyne, a tinsmith and pewterer from Lancaster. The shop of Heyne and Steinman would become known as Steinman's Hardware Store, the oldest hardware store in America.
Place of Origin
Lancaster
Credit
Heritage Center Collection. Gift of Henry J. Kauffman
Strainer of glazed redware, but with a lighter brown color than most redware. Resting on three tapered 1-1/8 " long feet. The flat-bottomed dish has straight sides that flare out to a molded, high lip. Applied handles at sides. Large holes in bottom and three rows of smaller holes at sides.
Lead glaze overall with some streaks/runs of a darker brown.
Numerous chips on body overall; some large ones on underside and a large chip on the side; handle edges have suffered the most significant chipping loss. Glaze is crackled overall and has some staining, particularly on the interior. Feet are moderately worn.
Object ID
G.98.12.17
Place of Origin
Pennsylvania
Credit
Gift of Mrs. S.R. Slaymaker II, Heritage Center Collection
Redware canning jar, ovoid shape with no handle. Pronounced foot ring and rounded flaring lip with recessed interior to receive a fitted lid (missing). Dark brown manganese decoration with some mottling, streaks and dark spatters. Lead glaze overall except for underside.
Very strong wear with losses. Lip has very large chip and one very small chip at outside edge. Strong losses of glaze at lip. Very strong abrasions at salient point of side, with considerable scattered scratches. Foot ring has three large chips and one very large chip. Soil on inside and underside.
Object ID
G.99.22.1
Place of Origin
Pennsylvania
Credit
Gift of Drs. Irwin and M. Susan Richman, Heritage Center Collection
Glazed soft paste porcelain Gaudy Dutch teapot (A) with lid (B). Handpainted "Butterfly" pattern decoration on pale blue body of pearlware. Squat ovoid body sits on a low footring; body swells most in lower half. Collar extends outward below an oblong mouth fitted with conforming domed lid with oblong knob finial . Spout has minimal molding as does arching applied handle.
Provenance
Collected by Harpo and Susan Marx during visits back East from CA. Donated to Heritage Center.
Overall strong staining, especially at lower spout and base section and interior. Strong hairline cracks throughout base and bottom, with resulting staining. Scratchon butterfly wing. Chip on underside of spout tip. Long split/crack on handle back, perhaps from firing. Coloring is very uneven at multiple places, sometimes creating a mottled effect. Wear and soil under foot ring.
Object ID
G.98.51.03a-b
Place of Origin
England
Credit
Given in memory of Harpo by Susan Marx, Heritage Center Collection
