Platter of ironstone transferware with clear glaze. Rectangular with clipped corners, recessed bottom and moderately wide sides that extend outward. White body is devoid of decoration except for black transfer scene of a long bridge spanning a river, 5 people in foreground, town at right end of bridge and another in the distance on right bank. Underside has apparent impressed mark and transfer maker's mark at center: under a spread eagle with shield is a "sign" reading "COLUMBIA BRIDGE ON THE SUSQUEHANNA". Below it is "W.R.", indicating maker William Ridgway & Co. Sticker on bottom is: "$390" and "CLP". This river scene is a variation of the print done by William Henry Bartlett (see G98.12.21).
Shelton or Hanley, England
Provenance
Purchased in Adamstown Antiques Gallery for Heritage Center collection. Transferred from Heritage Center, December 2012.
Copper teakettle with round body, gooseneck spout, very low domed lid w/ scrolled knob of sheet copper riveted onto lid with a hand-cut washer added under lid, suggesting repair or replacement. Curved handle hinges onto tapered plinth tab bases with two rivets each. Vertical dove-tailed side seam opposite single-seamed spout. Dove-tailed bottom.
Touchmark on top of handle is "R..REED." within a rectangular reserve with serrated ends.
Made by Robert Reed, working in Lancaster 1771-1779, then 1785-1795.
Provenance
Purchased by Heritage Center from Philip Bradley Antiques
Transferred from Heritage Center to LancasterHistory.org December, 2012.
Tax assessment lists Robert Reed 1786-1793.
Kauffman, Henry J. American Copper and Brass. New York: Bonanza, 1979.
Coppersmith info from Shelley Horvath Posten (dau. of Don Horvath), 2009
Copper dented and scratched overall, polish residue at handle hinges. Side handle break repaired with sheet iron patch secured to outside with two iron rivets. Knob appears to be a repair or a replacement.
Object ID
P.80.131
Place of Origin
Lancaster
Credit
Heritage Center Collection. Purchased through the generosity of the James Hale Steinman Foundation,
Round copper vessel, shaped like a teakettle, but without a spout. A shaped strap handle is attached to each side of the opening at shoulder with riveted brackets. The handle widens near the middle, where the maker's mark is stamped: "P & B. SCHAUM"
Body is dovetailed to base, one dovetailed vertical seam, handle attached to flanges held in place by two rivets each. Pot insert is missing. Another insert (S.13) was purchased as a replacement.
Vessel has multiple dents, creating a general distortion overall. Surface is also tarnished and has drip stains running down the sides. The bottom is very worn and has numerous stains. Blueish-white stains on the inside. Polish residue on handle.
Object ID
P.77.61
Place of Origin
Lancaster
Related Item Notes
See broadside for Benjamin Schaum's hardware store, P.91.02
Credit
Heritage Center Collection. Purchased through the generosity of the James Hale Steinman Foundation
Copper tea kettle, classic form with gooseneck spout, high dome lid, marked strap handle hinged on "plinth w/ serifs" tab bases. Lid fitted with a crudely fashioned replaced iron or steel mushroom-shaped finial, bent to one side.
Vertical dove-tailed seam on side opposite spout, top seam running length of spout. Dove-tailed bottom.
Tarnished with numerous dents and scratches over body. Two very heavy dents at shoulder, opposite each other and one on bottom. Finial knob bent to one side. Two significant cracks on proper right side at shoulder and one on back.
Object ID
P.01.48.1
Place of Origin
Lancaster
Credit
Heritage Center Collection. Purchased through the generosity of the James Hale Steinman Foundation
Large copper teakettle with rounded body, goose-neck spout and hinged handle having a medium arc, mounted on shaped flanges with three rivets. The domed lid has a small brass mushroom knob (replaced). Dovetailed seams on bottom and vertical seam on side opposite spout. Seamed repair to spout tip.
"F. STEINMAN" is stamped on the handle within a reserve.
Provenance
Transferred from Heritage Center Collection, Dec. 2012
Jack Brubaker, The Steinmans of Lancaster, pp. 11-15.
HJ Kauffman, Early American Copper, Tin & Brass, 1995, pp. 42-43.
HJ Kauffman, American Copper & Brass, 1979, p. 65.
Height (in)
13
Width (in)
16
Condition
Good
Condition Date
2013-11-13
Condition Notes
Many dents and overall wear. HJK says handle slightly shortened (likely done by him). Tip of spout replaced. Plugged hole in bottom. Replaced knob. Stamped name very worn. Tarnished with polish residue where the spout, handle, and lid meet the main body.
Object ID
G.77.14
Notes
When his father died in 1758, John Frederick Steinman, Sr. (1752-1823) moved with his mother to Lititz from his birthplace, Bethlehem, Pennsylvania. His mother remarried a few years later to John Christophe Heyne, a tinsmith and pewterer from Lancaster. The shop of Heyne and Steinman would become known as Steinman's Hardware Store, the oldest hardware store in America.
Place of Origin
Lancaster
Credit
Heritage Center Collection. Gift of Henry J. Kauffman
Copper sculpting/modeling tool hand fashioned to create a flattened, spoon-like handle leading to a rounded shank ending in another flattened end bent at the tip to create a short 1/2" extension bent to nearly a right angle for working in clay or plaster. End is squared off. Crude but effective tool for sculpting bears marks of hammering, especially underside of flattened handle. Used by Lloyd Mifflin. Tool presumed to have been fashioned by Lloyd Mifflin himself from a length of copper. Provenance: Mifflin to the Minnich sisters to the groundskeeper at Norwood to donors.
Strainer of glazed redware, but with a lighter brown color than most redware. Resting on three tapered 1-1/8 " long feet. The flat-bottomed dish has straight sides that flare out to a molded, high lip. Applied handles at sides. Large holes in bottom and three rows of smaller holes at sides.
Lead glaze overall with some streaks/runs of a darker brown.
Numerous chips on body overall; some large ones on underside and a large chip on the side; handle edges have suffered the most significant chipping loss. Glaze is crackled overall and has some staining, particularly on the interior. Feet are moderately worn.
Object ID
G.98.12.17
Place of Origin
Pennsylvania
Credit
Gift of Mrs. S.R. Slaymaker II, Heritage Center Collection
Stoneware storage jar with applied lug handles, salt-glazed, gray ovoid body with prominent lip and brushed cobalt blue decoration on sides and at applied handles. One side has a bifurcated flower with oval cartouche centered between flowers. Within cartouche is maker's mark "H GAST/ West Orange/ LANCASTER". Opposing side has a flower with 3 branches.
Gast established himself on W. Orange St. in 1834, but moved to 416 Manor St. in 1838. Thus, this jar was made sometime 1834 to 1838. Gast was the principal supplier of stoneware in the city for over 40 years, His son joined him in the mid 1850s.
Provenance
Unknown.
See Phil Schaltenbrand, "Big Ware Turners," 2002, pp. 18-20.
Large redware pitcher, sectioned octagonal form with conforming low pedestal base. Applied handle and pulled pouring spout. Orange-red color dark brown manganese mottling with clear glaze overall.
Impressed mark on underside is "C GAST" for Conrad Gast (1813- after 1880).
Prince and James Sts. Lancaster, PA
Provenance
Heritage Center purchased from Ruth Rogers of School House Farm Antiques, New Holland.
Wear at all salient points of the lower body as well as the outside and tip of handle. Two medium chips at opposite sides of lip and several minor chips at spout and sides of lip. Wear at bottom.
Object ID
P.02.04.1
Place of Origin
Lancaster
Credit
Gift of V. Ronald Smith, Heritage Center Collection
