A: Watercolor on wove paper of J. Crump Tannery, Marietta, Pa, depicting a panoramic view of the Klumpp Tannery and residence, viewed from Front St. The white 2-story frame house with one-story addition is in the foreground on the left with a man and woman by the front door. The tannery complex with smokestack is on the right, set further back from the street with the tanning operation underway. A man in a small horse-drawn carriage is in the street in the front and a boy chasing 2 chickens is in the yard between the house and tannery. A brick church is in the background center.
John C. Klumpp's Tannery was built by P. Moyer on Locust Street between 2nd St. (now E. Market) and Prospect Alley in 1815. Klumpp acquired the tannery in 1874 and operated it until his death in 1901. The tannery occupied lots 69-70-71-72, Strawberry Alley ran beside the Klumpp residence on the left. To the rear of the dwelling, behind the fence can be the kitchen garden and outhouse.
Signed bottom left, in ink, "P. Meissner./18/1/76."
2 photographs of tannery:
B: Black and white photo showing roughly the same view as A, although closer to ground level. The house is on the left and the tannery on the right. At least five people are sitting/standing on the porch of the house facing the yard. The buildings appear mostly unchanged from the watercolor. The date "1908" is written in the lower left corner in ink.
C: Black and whit photo of the tannery from the back. Four separate buildings of varying design can be seen in a row, with the smokestack extending up out of frame slightly right of center. A stone bridge over a creek is at extreme right, with creek running around the buildings to the left. The date "1929" is written in the lower left corner in blue ink.
The photographs appear to be photographic copies of the originals. They were attached to the paper backing covering the frame of the watercolor.
A: watercolor has brown staining all over, especially apparent in the sky. Further discoloration along the top edge. The pieces was cleaned (dry and wet), mended, and flattened by the Conservation Center for Art and Historic Artifacts in Philadelphia in 1991.
B,C: Photos. B is browned and faded at the edges and curves inward. Both B and C have tape and backing residue on the reverse. They were dry cleaned, mended and flattened by the CCAJA in 1991. Further details available in file.
Umbrella Manufactured by Follmer, Clogg & Co., Lancaster
Description
Umbrella, black silk-cotton canopy, metal ribs and shaft, carved J-shape wooden handle finished with dark stain and glossy varnish. Canopy appears to be a black blend of cotton and silk, having no glossy sheen.
Initials "FUMC" printed in white on applied piece of fabric on the underside of the canopy crown, apparently representing the maker, Follmer, Clogg & Co. (FUMC = Follmer, (Clogg) Umbrella Mfg. Co.) of Lancaster.
Bottom of wooden handle is relief-carved with a heart, inside of which are 4 raised diamonds, separating two sets of 3 leaves. Heart is surrounded by vertically carved 'slices' into the wood.
Black cotton-silk tape secures umbrella when closed, using a metal ring at one end and small black button at other end where sewn to bottom of canopy. (Michael Middleton)
Provenance
Donor is niece of former umbrella hand-carver working for Follmer-Clogg (claims donor). John I. Hartman says the company did not have any carvers as actual employees.
Year Range From
1920
Year Range To
1944
Storage Location
LancasterHistory, Lancaster, PA
Storage Room
DAC
Storage Wall
Island 5
Storage Cabinet
Unit 46
Storage Shelf
Shelf 3
Storage Container
Box 0382
Object Name
Umbrella
Length (cm)
90.17
Length (ft)
2.9583333333
Length (in)
35.5
Dimension Details
42 inches wide when open
Condition
Good
Condition Date
1998-01-02
Condition Notes
Wear to metal shaft, with paint losses. Shaft tip has wear and corrosion.
Tankard, lidded barrel form. Copper body with brass handle, shell thumb piece and four bands encircling body. Interior is tinned. Engraved on opposite side from handle, "COMPLIMENTS/ OF/ JOHN G. SCHAUM/ TO/ FRANK J. RIEKER." One of a pair with P00.42.2.
Believed to be a presentation piece given by Schaum in appreciation for all the work he was given in Rieker's brewery. Schaum did copper, tin and sheet iron work and was the son and one-time partner of plumber/ coppersmith John P. Schaum.
Provenance
Collection of J. Harlan Miller sold at Conestoga Auction Oct. 21, 2000.
Tankard, lidded barrel form. Copper body with brass handle, shell thumb piece and four bands encircling body. Interior is tinned. Engraved on opposite side from handle, "COMPLIMENTS/ OF/ JOHN G. SCHAUM/ TO/ JOSEPH HAEFNER." One of a pair with P00.42.3.
Believed to be a presentation piece given by Schaum in appreciation for all the work he was given in Haefner's brewery. Schaum did copper, tin and sheet iron work and was the son and one-time partner of plumber/ coppersmith John P. Schaum.
Provenance
Collection of J. Harlan Miller sold at Conestoga Auction Oct. 21, 2000. Transferred from Heritage Center Dec. 2012.
Heavy tarnish overall. Moderate scratching. Slightly dented in center of and below engraving. Small nicks on rim of lid. Minor corrosion where handle and thumb piece connect to body and on bottom. Some polish residue in crevices.
Tin candle mold with 2 rows of 4, mounted on a raised rectangular base. The 8 molds incline toward each other at their tips and are soldered together for strength. Wire finger ring attached to one side of base and large looped strap handle at other side.
Provenance
Provenance before donor is unknown. Transferred from Heritage Center, December 2012.
Copper sculpting/modeling tool hand fashioned to create a flattened, spoon-like handle leading to a rounded shank ending in another flattened end bent at the tip to create a short 1/2" extension bent to nearly a right angle for working in clay or plaster. End is squared off. Crude but effective tool for sculpting bears marks of hammering, especially underside of flattened handle. Used by Lloyd Mifflin. Tool presumed to have been fashioned by Lloyd Mifflin himself from a length of copper. Provenance: Mifflin to the Minnich sisters to the groundskeeper at Norwood to donors.
Miniature stoneware crock made as an advertising piece for Steinman Hardware. Cylindrical body, molded rim at outside. Printed on side in cobalt blue is: "STEINMAN HDWE. CO./ LANCASTER, PA. Dark brown glaze on inside and top half of outside; bottom half is a tan glaze. Bottom unglazed with work marks over surface.
Miniature redware storage jar, reddish-brown body with manganese decoration on neck and shoulders with side drips. Tin glazed overall except for bottom.
Body is tall and cylindrical with slightly flared base, shoulders that slope upward to a minimal plain neck and mouth. Mid-line impressed band of "beads" and additional band very faintly impressed 1/4" above base.
Coloring is typical of pieces made by Jacob Medinger (1856-1932). Jacob's father, William Medinger, operated a pottery in Limerick, Montgomery Co., which was taken over by his three sons. By 1900, Jacob alone ran the pottery.
Perhaps Montgomery County, PA by Jacob Medinger (1856-1932).
Cast concrete bust of a smiling man mounted on a horseshoe base and a large 1 1/4" diameter socket/hole in top of head. All painted black, and garishly adorned with gold, red and white highlights. Inscription in cursive is scratched into black paint on underside: "Designed, manufactured and presented by J. Y. Kline Aug.13, 1923." Jacob Kline manufactured novelties in Mt. Joy (Florin) until c. 1905 when he began casting ornamental building blocks and related items for buildings.
One of two identical white china high-heeled 19th century woman's shoes, with molded floral decoration around entire shoe. Raised flowers trim front of shoe with a tied bow centered above. Lavishly painted with heavy lustrous gold paint around back and sides of shoe as well as the bow and centers of raised flowers. Printed on top of the shoe front is: "Souvenir/ of /Lancaster/ Pa."
The number "59" is handpainted on bottom of heel. Impressed underneath instep is: "A" over "1924"