Copper measure of sheet copper with conical body. Beneath applied handle is a keyed seam. Rolled copper base and lip. Applied strap handle, attached with 2 rivets at top, 1 rivet at bottom. Handle terminates with heart form at bottom and two lobes at top. Interior is tinned.
The name "(E)ICHHOLTZ" is stamped onto top of strap handle. "E" of Eichholtz is hidden where handle is attached at top. Interior is coated with tin.
Jacob Eichholtz worked as a coppersmith/tinsmith with his brother George on East King St. until c. 1815, when he began focusing on portrait painting. 1830 Tax Assessment lists him as a portrait painter.
Research by Pat C. Keller at Historical Society of PA in Jacob Eichholtz's daybook, indicates he made measures, not mugs. Notes in file indicate purchase was contingent on results of an effort to x-ray upper handle for evidence of initial unseen letters of stamped name. No indication this was ever done.
Provenance: Sellers Jackie & Vernon Gunnion purchased measure at Conestoga Auction circa March 1986. Jackie reports Don Fennimore of Winterthur knows only two other signed copper pieces -- by Apple and by Schlosser.
Photos: slides #23-5-1 to 9 and multiple B&W 8x10s
Small to significantly larger dents on sides and bottom Some scratches from general wear. Surface has been polished and lacquered. Some polish residue visible at both the rolled lip and rolled base.
First "H" and "T" of "ichholtz" are very worn. Corrosion and wear to interior tin surface.
Upper terminal of handle has split at left rivet (stable).
Object ID
G.86.03
Notes
See accompanying P86.3 file for research done by Heritage Center Director Pat Keller-Connor to determine authenticity of the touchmark. There was a possibility of the first initial being "J" for Jacob or "G" for George, a brother. On Feb. 17, 1802 Jacob advertised with his brother George as "tin-plate workers". Pat K-C intensively did research to settle the matter before finalizing the purchase of the measure
studied Vol. 1 & 2
See Henry Kauffman, American Copper and Brass, p. 119.
Place of Origin
Lancaster
Credit
Courtesy of LancasterHistory, Lancaster, Pennsylvania.
Glove stretcher is cast, nickel-plated brass (?). Made of two opposing lengths of tapered, rounded metal, spring operated. Dog's leg shape tool has handle cast with raised, scrolled decoration. Opposite end is tapered so it fits into glove fingers for stretching after being heated. The larger end of the taper is inset with lead for holding heat.
Inscriptions: "THE / FOSTER GLOVE STRETCHER" is on one handle and the other has "PATENTED JULY 27, 1888."
Provenance
Collected by Lillian Hollings Kiker, born to Scottish Americans who lived in New Jersey. Born (1912) and lived in New Jersey, last of Egg Harbor, she was active with quilting, sewing, knitting & crocheting. Collection inherited by donor when her mother passed away.
Flat shaped tool is constructed of two sheet brass sides riveted together at the handle end, allowing a flat triangular iron blade that is sandwiched between to slide out at the other end for cutting. Blade slides via a small riveted guide that slides along a slot in the brass sides. Cutter's brass sides have a fleur-de-lis-shaped handle and scalloped sides and each slot has a measuriing scale numbered from one to ten.
Inscription: The sliding guide on both sides of the slot reads "D.M.CO. / PAT SEPT. 3, 72 / BPT.CONN."
Provenance
Collected by Lillian Hollings Kiker, born to Scottish Americans who lived in New Jersey. Born (1912) and lived in New Jersey, last of Egg Harbor, she was active with quilting, sewing, knitting & crocheting. Collection inherited by donor when her mother passed away.
Button-hole cutter, creaser or marking tool is silver plated ferrous metal.
In form of a miniature spoon with a blade instead of a bowl. Blade is eye-shaped with raised midline extending from tip to tip. Edges of blade are fairly sharp. Handle end has the bust of a crowned femal monarch with long flowing hair and necklace above a decorative base of scrolls surrounding a cabochon. Shaft of tool is similar to an architectural column. Entire handle is made of two identical halves, cast and joined with side seams visible.
Provenance
Collected by Lillian Hollings Kiker, born to Scottish Americans who lived in New Jersey. Born (1912) and lived in New Jersey, last of Egg Harbor, she was active with quilting, sewing, knitting & crocheting. Collection inherited by donor when her mother passed away.
Some tarnish overall. Large dent in one cabochon and small dent in the other.
Object ID
G.05.15.19
Notes
See another example of this ring found on internet in this file. Iguala is a town near the renowned silvermaking town of Taxco (near the west coast of Mexico) where William Spratling, in the 1930s, famously reinstituted the silver industry and craftsmanship that had died centuries before.
Credit
Gift of Susan Garofola in memory of Lillian Kiker (mother), Heritage Center Collection
Hem gauge or measure of ferrous metal, electroplated nickel silver blade with a sterling silver plated handle. Handle is a pierced foliate design with a rose at top. A heart motif is at center of handle. Blade extends form handle in the form of a ruler 3 inches long. Moveable clamp with pointed tip can be locked in place along gauge.
Possibly made by the Webster Silver Company. Inscription: Marked "STERLING" on both sides of handle with the Webster Silver Company mark alongside - a "W" on an arrow.
Provenance
Collected by Lillian Hollings Kiker, born to Scottish Americans who lived in New Jersey. Born (1912) and lived in New Jersey, last of Egg Harbor, she was active with quilting, sewing, knitting & crocheting. Collection inherited by donor when her mother passed away.
Tatting hook of bone handle shaft of iron hook set into smaller end.
Tool has handle of elongated teardrop shape, somewhat flattened in cross-section. Wire-like shaft with rounded hook on tip is set into handle. Shaft is thicker than hooked end.
Provenance
Collected by Lillian Hollings Kiker, born to Scottish Americans who lived in New Jersey. Born (1912) and lived in New Jersey, last of Egg Harbor, she was active with quilting, sewing, knitting & crocheting. Collection inherited by donor when her mother passed away.
Set of tatting tools, nickel silver plated steel, has four pieces. Each piece has in common the shaped and decorated portions, the handles of the three tools and the needle case body. This feature is a flattened octagonal shape in cross-section, with successive divots ground out with a round grinding wheel. Handles and case all taper along their length.
A. Needle case is 2.75" long and .375" wide. At the heavier end of case is a fitted cap that slides onto a smaller male extension protruding from main body. Seam visible along sides where both halves of case have been joined.
B. Hook on handle is 4" long and .25" wide. Tapers from handle end down to where shaft is attached. Shaft has ball-and-ring at handle, a slight swell along length and a minute hook at tip.
C. Awl is 3.625" long and .25" wide. Same handle as above. Shaft is similar in shape except heavier and shorter and has a sharp tip.
D. Threading tool(?) is 3" long and .5" long. Same handle as above. Shaft is shorter and has a large open loop in a teardrop shape.
Provenance
Collected by Lillian Hollings Kiker, born to Scottish Americans who lived in New Jersey. Born (1912) and lived in New Jersey, last of Egg Harbor, she was active with quilting, sewing, knitting & crocheting. Collection inherited by donor when her mother passed away.
Set of 3 steel tatting hooks, no handles. All are similar with round, tapering shanks that terminate in tiny hooks of differing sizes. Theaded at other end for fitting into a handle, now missing. Double ring turnings adjacent to threads.
Provenance
Collected by Lillian Hollings Kiker, born to Scottish Americans who lived in New Jersey. Born (1912) and lived in New Jersey, last of Egg Harbor, she was active with quilting, sewing, knitting & crocheting. Collection inherited by donor when her mother passed away.
Broadside commercially printed on wove paper in Pa. German script. Geometric border surrounds text block of 4 long paragraphs. Modern frame.
Title is "Kraftiges Gebet, / Wodurch man sich vor Kugel und Degen, vor sichtbarlichen und un- / sichtbarlichen Feinden, so wie vor allem moglichen / Uebel beschutzen und bewahren konne."
Place of origin is unknown.
Seller's translation: "A Powerful Prayer whereby one can protect himself from shot and sword, of a visible or invisible enemy, just as from all other possible wounds that one need protect against."
Rows of letters at bottom with more text with a title "Vor die fallende Sucht, oder Gicht," which seems to mean "For those who've come down with an ailment (addiction?), or gout."
Three leaves of family record pages of the Long family Bible have penwork by Francis Blum, David C. Hoke and Thomas J.Stevens.
P.94.15.02 A: Printed on the front side only, this page is dominated by a huge gold wedding ring and other symbols of marriage. Entries made in ink script state that William Long and Ella E. Shimp were married in East Petersburg, on March 4, 1900, by A.S. Hottenstein.
P94.15.02 B: Framed page shows both sides. Front side repeats marriage info of William and Ella (E. Shimp) Long, done in pen work of Francis Blum whose name is written at the bottom of the page. Elaborately decorated "W" initial letter of William Long. This oversize letter dominates the page. Blum uses various styles of lettering for remaining entries. Decoration is done in red and black ink as well as watercolor.
The reverse side lists the births of William and Ella Long and their five children (Norman S., Mary Edna, Raymond S., William S., and C. Earl Long). The first 3 names are by Blum, but the last two children's entries are done in different hands; William is done by David C. Hoke and Earl is done by Thomas J. Stevens. Signed at the bottom "David C. Hoke, Lititz, Pa., June 21, 1910".
P94.15.02 C: Front side has heading "DEATHS", reverse has "MEMORANDUM". No entries on either side.
Pages have ragged edges where torn from Bible; overall acid burn with some dark stains and soiling; reverse side of page C has residue and paper loss at bottom left corner and top right corner.
Page B was mounted and framed by Brian Howard in 1996. It shows both sides of page.
Object ID
P.94.15.02a-c
Notes
P.94.15.01 A-B records have for more work by Blum and Hoke.
The Long and Walborn families were related due to intermarriage by two children (Alverta Walborn and Raymond Long).
Place of Origin
Lancaster County
Credit
Acquired through the generosity of the James Hale Steinman Foundation, Heritage Center Collection