Copper teakettle with round body, gooseneck spout, very low domed lid w/ scrolled knob of sheet copper riveted onto lid with a hand-cut washer added under lid, suggesting repair or replacement. Curved handle hinges onto tapered plinth tab bases with two rivets each. Vertical dove-tailed side seam opposite single-seamed spout. Dove-tailed bottom.
Touchmark on top of handle is "R..REED." within a rectangular reserve with serrated ends.
Made by Robert Reed, working in Lancaster 1771-1779, then 1785-1795.
Provenance
Purchased by Heritage Center from Philip Bradley Antiques
Transferred from Heritage Center to LancasterHistory.org December, 2012.
Tax assessment lists Robert Reed 1786-1793.
Kauffman, Henry J. American Copper and Brass. New York: Bonanza, 1979.
Coppersmith info from Shelley Horvath Posten (dau. of Don Horvath), 2009
Copper dented and scratched overall, polish residue at handle hinges. Side handle break repaired with sheet iron patch secured to outside with two iron rivets. Knob appears to be a repair or a replacement.
Object ID
P.80.131
Place of Origin
Lancaster
Credit
Heritage Center Collection. Purchased through the generosity of the James Hale Steinman Foundation,
Copper Teakettle has large 7-quart round body, domed lid with brass button knob attached to a metal base visible inside. Goose-neck spout. One vertical dove-tailed seam opposite spout, straight seam along top of spout and short seam underneath. Dove-tailed bottom. Arched handle hinged at chordal sector tab bases with three rivets each.
Maker's mark on top center of handle within serrated rectangular reserve: "7 JOHN.GETZ 7"
Made by John Getz (working 1801-1840).
Provenance
See 2009 materials sent by Shelley Horvath Poston (dau. of Don Horvath).
Copper has many dents and scratches. Significant 3 1/2" series of dents down the side opposite the spout and one under lid finial. Heavily soldered repair joint at base of spout.
Object ID
P.80.115
Place of Origin
Lancaster
Credit
Heritage Center Collection. Purchased through the generosity of the James Hale Steinman Foundation
Copper tea kettle, classic form with gooseneck spout, high dome lid, marked strap handle hinged on "plinth w/ serifs" tab bases. Lid fitted with a crudely fashioned replaced iron or steel mushroom-shaped finial, bent to one side.
Vertical dove-tailed seam on side opposite spout, top seam running length of spout. Dove-tailed bottom.
Tarnished with numerous dents and scratches over body. Two very heavy dents at shoulder, opposite each other and one on bottom. Finial knob bent to one side. Two significant cracks on proper right side at shoulder and one on back.
Object ID
P.01.48.1
Place of Origin
Lancaster
Credit
Heritage Center Collection. Purchased through the generosity of the James Hale Steinman Foundation
Large copper teakettle with rounded body, goose-neck spout and hinged handle having a medium arc, mounted on shaped flanges with three rivets. The domed lid has a small brass mushroom knob (replaced). Dovetailed seams on bottom and vertical seam on side opposite spout. Seamed repair to spout tip.
"F. STEINMAN" is stamped on the handle within a reserve.
Provenance
Transferred from Heritage Center Collection, Dec. 2012
Jack Brubaker, The Steinmans of Lancaster, pp. 11-15.
HJ Kauffman, Early American Copper, Tin & Brass, 1995, pp. 42-43.
HJ Kauffman, American Copper & Brass, 1979, p. 65.
Height (in)
13
Width (in)
16
Condition
Good
Condition Date
2013-11-13
Condition Notes
Many dents and overall wear. HJK says handle slightly shortened (likely done by him). Tip of spout replaced. Plugged hole in bottom. Replaced knob. Stamped name very worn. Tarnished with polish residue where the spout, handle, and lid meet the main body.
Object ID
G.77.14
Notes
When his father died in 1758, John Frederick Steinman, Sr. (1752-1823) moved with his mother to Lititz from his birthplace, Bethlehem, Pennsylvania. His mother remarried a few years later to John Christophe Heyne, a tinsmith and pewterer from Lancaster. The shop of Heyne and Steinman would become known as Steinman's Hardware Store, the oldest hardware store in America.
Place of Origin
Lancaster
Credit
Heritage Center Collection. Gift of Henry J. Kauffman
Traditional tea kettle form made of tinned sheet iron. Now unmoveable handle hinged to oval tab bases with two rivets. Dovetailed vertical seam on side opposite spout: spout has a straight seam along top and also bottom of base section. Dovetail seam around shoulder top. Slightly domed lid has black-painted knob.
Made by George Rogers, tinsmith, (1814-1854, working c. 1848).
For references to G. Rogers, see Kauffman, American Copper and Brass, p. 207. Copy in file.
Also see 1859-60 Directory, p. 143 for reference to George Rogers.
Height (in)
11
Width (in)
11.75
Diameter (in)
8
Condition
Good
Condition Date
2013-11-18
Condition Notes
Interior heavily rusted. Dent to the right of the spout on shoulder. Multiple smaller dents. Multiple score lines, possibly from a rasp, especially on shoulder area.
Strainer of glazed redware, but with a lighter brown color than most redware. Resting on three tapered 1-1/8 " long feet. The flat-bottomed dish has straight sides that flare out to a molded, high lip. Applied handles at sides. Large holes in bottom and three rows of smaller holes at sides.
Lead glaze overall with some streaks/runs of a darker brown.
Numerous chips on body overall; some large ones on underside and a large chip on the side; handle edges have suffered the most significant chipping loss. Glaze is crackled overall and has some staining, particularly on the interior. Feet are moderately worn.
Object ID
G.98.12.17
Place of Origin
Pennsylvania
Credit
Gift of Mrs. S.R. Slaymaker II, Heritage Center Collection
Large redware mixing bowl, with dark red-brown glaze inside. Spout formed at lip. Two applied handles at sides. Glaze splashed and dripped onto other areas of bowl, including sides, handles, and underside of lip.
Large areas of glaze loss, as well as multiple small losses. Scratches and pinpricks in surface. The edge is worn. Some chunks of bottom edge are missing.
Object ID
G.80.123.6
Place of Origin
Southeastern Pennsylvania
Credit
Heritage Center Collection, gift of Mrs. Paul A. Mueller
Stoneware storage jar with applied lug handles, salt-glazed, gray ovoid body with prominent lip and brushed cobalt blue decoration on sides and at applied handles. One side has a bifurcated flower with oval cartouche centered between flowers. Within cartouche is maker's mark "H GAST/ West Orange/ LANCASTER". Opposing side has a flower with 3 branches.
Gast established himself on W. Orange St. in 1834, but moved to 416 Manor St. in 1838. Thus, this jar was made sometime 1834 to 1838. Gast was the principal supplier of stoneware in the city for over 40 years, His son joined him in the mid 1850s.
Provenance
Unknown.
See Phil Schaltenbrand, "Big Ware Turners," 2002, pp. 18-20.
Redware canning jar, ovoid shape with no handle. Pronounced foot ring and rounded flaring lip with recessed interior to receive a fitted lid (missing). Dark brown manganese decoration with some mottling, streaks and dark spatters. Lead glaze overall except for underside.
Very strong wear with losses. Lip has very large chip and one very small chip at outside edge. Strong losses of glaze at lip. Very strong abrasions at salient point of side, with considerable scattered scratches. Foot ring has three large chips and one very large chip. Soil on inside and underside.
Object ID
G.99.22.1
Place of Origin
Pennsylvania
Credit
Gift of Drs. Irwin and M. Susan Richman, Heritage Center Collection
Butter crock, stoneware, blue-gray ground with cobalt floral decoration. Lip is 7/8 inch high with scored decorative rings below. Applied handle at each side near top.
Clarke Hess says this crock is known "in the trade" as a cake crock.
Several cracks: one extends 2 1/4 inches down from lip to exterior air bubble on surface, one extends down side from top to bottom (especially visible at lip and exterior. Crazing over much of surface. Salts visible at lip, inside and outside
Object ID
G.04.23.07
Credit
Gift of Sarah Muench, Heritage Center Collection, LancasterHistory.org
Corkscrew of heavy gauge wire twists to form shaft and screw. Simple turned-wood handle is inserted perpendicularly into wire shaft for turning screw. Additional hollow tube of turned wood serves to sheath the sharp corkscrew to prevent injury.
Handle is printed with advertisement for "The Largest, The Cheapest/ ROHRER'S/ Liquor Store,/ 24 & 25 Centre Square,/ Lancaster, Pa." Underneath, in tiny lettering is "EASTERN BOTTLING SUPPLY 99, N.Y."
Tinned sheet iron. Single tulip with full bulbous shape and two curving petals. Design outlined with one1/2" wide metal strip soldered to perforated base. One large central air hole and one small nail hole.
Tinned sheet iron. Running rabbit design facing right. Formed with two 3/4" wide metal strips soldered to base with one large air hole and two nail holes. Overlapped seam.
Tinned sheet iron. Unusual fish design with two fins above and below. Outlined with two 3/4" wide metal strips soldered to perforated base. Two large air holes
Tinned sheet iron. Running stag design, facing left. Outlined with one 1/2" wide metal strip soldered to perforated base. Two small air holes and two tiny nail holes.
Handle removed, solder remnants. Heavily rusted over gray-green patina. Strip is misshapen, esp. at front legs. Bottom left corner of foundation is bent.
Object ID
G.96.37.76
Credit
Gift of Henry J. Kauffman, Heritage Center Collection
Tinned sheet iron. Love birds design formed with two 9/16" wide metal strips soldered to backing with three small air holes. Confronting birds are perched on a branch kissing.
Tinned sheet iron. Double tulip design with opposing configuration extended outward from four leaves. Oval outside border has a crimped outline. All executed with seven 1/2" wide metal strips soldered to oval backing.