P95.02.01A: Crystal ball is a sphere of clear glass containing tiny interior bubbles and barely perceptible striations on the surface corresponding to lines of latitude.
P95.02.01B: Base for ball is a turned disk of pine with recessed top in which to
Place of origin is unknown.
Provenance
9/07/2012 - Transferred from HC Collections; 12/29/94 - Purchase from Book Haven 146 N. Prince Street, Lancaster, PA 17603
Glass ball has minor surface abrasions or imperfections; some small nicks and scratches in the base, and a 1/2" area of finish loss on the center of the bottom.
Sketch box made of brown alligator skin / leather over wood. Flat rectangular base w/ raised section at right end has two sunken containers. Top one is oval with ornate raised decoration on hinged silver(?) lid; beaded oval trim at base marked "PAT. March. 25.90." Oval well lined with suede. Lower container has alligator-covered round hinged lid leading to another hinged metal lid leading to a small ink jar within.
Place of origin is unknown.
Large part is a padded alligator-covered lid hinged at top. Underside of lid has pouches of light brown leather. Writing/sketching surface has a blue paper blotter secured by leather corners. Leather loop at hinge holds a metal pen decorated with raised beaded rings.
Inscription on underside is pencil script: "From Charles / Xmas 1890". Alongside is a sticker with name and address of donor.
Provenance
Donor acquired this and many other Mifflin pieces from the Mifflin estate and, then donated it to the Heritage Center in 1995.
The alligator skin and leather are cracked, especially along the spine and bottom of the folder. The box with the two compartments is uneven on the top. The lid of the oval shaped compartment is tarnished, and the snap is broken. The ink jar is staine
Object ID
G.95.36.2
Credit
Gift of Mr. and Mrs. Lamar L. Libhart, Heritage Center Collection
Platter of ironstone transferware with clear glaze. Rectangular with clipped corners, recessed bottom and moderately wide sides that extend outward. White body is devoid of decoration except for black transfer scene of a long bridge spanning a river, 5 people in foreground, town at right end of bridge and another in the distance on right bank. Underside has apparent impressed mark and transfer maker's mark at center: under a spread eagle with shield is a "sign" reading "COLUMBIA BRIDGE ON THE SUSQUEHANNA". Below it is "W.R.", indicating maker William Ridgway & Co. Sticker on bottom is: "$390" and "CLP". This river scene is a variation of the print done by William Henry Bartlett (see G98.12.21).
Shelton or Hanley, England
Provenance
Purchased in Adamstown Antiques Gallery for Heritage Center collection. Transferred from Heritage Center, December 2012.
Copper teakettle with round body, gooseneck spout, very low domed lid w/ scrolled knob of sheet copper riveted onto lid with a hand-cut washer added under lid, suggesting repair or replacement. Curved handle hinges onto tapered plinth tab bases with two rivets each. Vertical dove-tailed side seam opposite single-seamed spout. Dove-tailed bottom.
Touchmark on top of handle is "R..REED." within a rectangular reserve with serrated ends.
Made by Robert Reed, working in Lancaster 1771-1779, then 1785-1795.
Provenance
Purchased by Heritage Center from Philip Bradley Antiques
Transferred from Heritage Center to LancasterHistory.org December, 2012.
Tax assessment lists Robert Reed 1786-1793.
Kauffman, Henry J. American Copper and Brass. New York: Bonanza, 1979.
Coppersmith info from Shelley Horvath Posten (dau. of Don Horvath), 2009
Copper dented and scratched overall, polish residue at handle hinges. Side handle break repaired with sheet iron patch secured to outside with two iron rivets. Knob appears to be a repair or a replacement.
Object ID
P.80.131
Place of Origin
Lancaster
Credit
Heritage Center Collection. Purchased through the generosity of the James Hale Steinman Foundation,
Round copper vessel, shaped like a teakettle, but without a spout. A shaped strap handle is attached to each side of the opening at shoulder with riveted brackets. The handle widens near the middle, where the maker's mark is stamped: "P & B. SCHAUM"
Body is dovetailed to base, one dovetailed vertical seam, handle attached to flanges held in place by two rivets each. Pot insert is missing. Another insert (S.13) was purchased as a replacement.
Vessel has multiple dents, creating a general distortion overall. Surface is also tarnished and has drip stains running down the sides. The bottom is very worn and has numerous stains. Blueish-white stains on the inside. Polish residue on handle.
Object ID
P.77.61
Place of Origin
Lancaster
Related Item Notes
See broadside for Benjamin Schaum's hardware store, P.91.02
Credit
Heritage Center Collection. Purchased through the generosity of the James Hale Steinman Foundation
Copper Teakettle has large 7-quart round body, domed lid with brass button knob attached to a metal base visible inside. Goose-neck spout. One vertical dove-tailed seam opposite spout, straight seam along top of spout and short seam underneath. Dove-tailed bottom. Arched handle hinged at chordal sector tab bases with three rivets each.
Maker's mark on top center of handle within serrated rectangular reserve: "7 JOHN.GETZ 7"
Made by John Getz (working 1801-1840).
Provenance
See 2009 materials sent by Shelley Horvath Poston (dau. of Don Horvath).
Copper has many dents and scratches. Significant 3 1/2" series of dents down the side opposite the spout and one under lid finial. Heavily soldered repair joint at base of spout.
Object ID
P.80.115
Place of Origin
Lancaster
Credit
Heritage Center Collection. Purchased through the generosity of the James Hale Steinman Foundation
Copper tea kettle, classic form with gooseneck spout, high dome lid, marked strap handle hinged on "plinth w/ serifs" tab bases. Lid fitted with a crudely fashioned replaced iron or steel mushroom-shaped finial, bent to one side.
Vertical dove-tailed seam on side opposite spout, top seam running length of spout. Dove-tailed bottom.
Tarnished with numerous dents and scratches over body. Two very heavy dents at shoulder, opposite each other and one on bottom. Finial knob bent to one side. Two significant cracks on proper right side at shoulder and one on back.
Object ID
P.01.48.1
Place of Origin
Lancaster
Credit
Heritage Center Collection. Purchased through the generosity of the James Hale Steinman Foundation
Tankard, lidded barrel form. Copper body with brass handle, shell thumb piece and four bands encircling body. Interior is tinned. Engraved on opposite side from handle, "COMPLIMENTS/ OF/ JOHN G. SCHAUM/ TO/ FRANK J. RIEKER." One of a pair with P00.42.2.
Believed to be a presentation piece given by Schaum in appreciation for all the work he was given in Rieker's brewery. Schaum did copper, tin and sheet iron work and was the son and one-time partner of plumber/ coppersmith John P. Schaum.
Provenance
Collection of J. Harlan Miller sold at Conestoga Auction Oct. 21, 2000.
Tankard, lidded barrel form. Copper body with brass handle, shell thumb piece and four bands encircling body. Interior is tinned. Engraved on opposite side from handle, "COMPLIMENTS/ OF/ JOHN G. SCHAUM/ TO/ JOSEPH HAEFNER." One of a pair with P00.42.3.
Believed to be a presentation piece given by Schaum in appreciation for all the work he was given in Haefner's brewery. Schaum did copper, tin and sheet iron work and was the son and one-time partner of plumber/ coppersmith John P. Schaum.
Provenance
Collection of J. Harlan Miller sold at Conestoga Auction Oct. 21, 2000. Transferred from Heritage Center Dec. 2012.
Heavy tarnish overall. Moderate scratching. Slightly dented in center of and below engraving. Small nicks on rim of lid. Minor corrosion where handle and thumb piece connect to body and on bottom. Some polish residue in crevices.
Large copper teakettle with rounded body, goose-neck spout and hinged handle having a medium arc, mounted on shaped flanges with three rivets. The domed lid has a small brass mushroom knob (replaced). Dovetailed seams on bottom and vertical seam on side opposite spout. Seamed repair to spout tip.
"F. STEINMAN" is stamped on the handle within a reserve.
Provenance
Transferred from Heritage Center Collection, Dec. 2012
Jack Brubaker, The Steinmans of Lancaster, pp. 11-15.
HJ Kauffman, Early American Copper, Tin & Brass, 1995, pp. 42-43.
HJ Kauffman, American Copper & Brass, 1979, p. 65.
Height (in)
13
Width (in)
16
Condition
Good
Condition Date
2013-11-13
Condition Notes
Many dents and overall wear. HJK says handle slightly shortened (likely done by him). Tip of spout replaced. Plugged hole in bottom. Replaced knob. Stamped name very worn. Tarnished with polish residue where the spout, handle, and lid meet the main body.
Object ID
G.77.14
Notes
When his father died in 1758, John Frederick Steinman, Sr. (1752-1823) moved with his mother to Lititz from his birthplace, Bethlehem, Pennsylvania. His mother remarried a few years later to John Christophe Heyne, a tinsmith and pewterer from Lancaster. The shop of Heyne and Steinman would become known as Steinman's Hardware Store, the oldest hardware store in America.
Place of Origin
Lancaster
Credit
Heritage Center Collection. Gift of Henry J. Kauffman
