Tin candle mold with 2 rows of 4, mounted on a raised rectangular base. The 8 molds incline toward each other at their tips and are soldered together for strength. Wire finger ring attached to one side of base and large looped strap handle at other side.
Provenance
Provenance before donor is unknown. Transferred from Heritage Center, December 2012.
Copper pail, cylindrical body, collared neck fitted with a copper wire bail-type handle hooked through side holes. Rolled lip edge. Dove-tailed bottom. Made for holding the glue while inset into larger water-filled gluepot and heated. Inner vessel of the double boiler gluepot.
This gluepot insert was obtained by donor to replace missing original inner component of gluepot P.77.61.
Provenance
Gift of Henry J. Kauffman from unknown source. Transferred from Heritage Center 12/2013
Strainer of glazed redware, but with a lighter brown color than most redware. Resting on three tapered 1-1/8 " long feet. The flat-bottomed dish has straight sides that flare out to a molded, high lip. Applied handles at sides. Large holes in bottom and three rows of smaller holes at sides.
Lead glaze overall with some streaks/runs of a darker brown.
Numerous chips on body overall; some large ones on underside and a large chip on the side; handle edges have suffered the most significant chipping loss. Glaze is crackled overall and has some staining, particularly on the interior. Feet are moderately worn.
Object ID
G.98.12.17
Place of Origin
Pennsylvania
Credit
Gift of Mrs. S.R. Slaymaker II, Heritage Center Collection
Redware canning jar, ovoid shape with no handle. Pronounced foot ring and rounded flaring lip with recessed interior to receive a fitted lid (missing). Dark brown manganese decoration with some mottling, streaks and dark spatters. Lead glaze overall except for underside.
Very strong wear with losses. Lip has very large chip and one very small chip at outside edge. Strong losses of glaze at lip. Very strong abrasions at salient point of side, with considerable scattered scratches. Foot ring has three large chips and one very large chip. Soil on inside and underside.
Object ID
G.99.22.1
Place of Origin
Pennsylvania
Credit
Gift of Drs. Irwin and M. Susan Richman, Heritage Center Collection
Pewter plate, part of the Warwick Congregation's (now known as the Brickerville United Lutheran Church) communion service.
Flat bottom, rounded booge and wide, flat rim with single reeded edge.
Underside struck with two oval marks: one has "Townsend and Compton" and the other reads "LONDON." Following are four small square marks in a row. The last one has the initials "T&C".
Provenance
The entire communion service remained in use over the years until the congregation decided in 1997 to find a safe place for this valuable communion set. Purchased by the Heritage Center of Lancaster County.
Pewter plate, part of the Warwick Congregation's (now known as the Brickerville United Lutheran Church) communion service.
Flat bottom, rounded booge and wide, flat rim with single reeded edge.
Underside struck with two worn round marks, on left an anchor over top of the letter "G", undereath of which is "PERCHARD". The right mark has a flower over "LONDON". Another stamp below is heavily worn with "MADE I(N) (L)OND(ON)". Three smaller square marks below.
Provenance
The entire communion service remained in use over the years until the congregation decided in 1997 to find a safe place for this valuable communion set. Purchased by the Heritage Center of Lancaster County.