Jacquard coverlet of cotton warp and dyed wools (blue, red, green). Corner block reads: "Jacob C. / Schriver. / Hampton / Adams / County. PA. / AD. 1844 / Eve / Spangler."
Two-part (42-inch widths) coverlet is joined with a vertical center seam. Dominant motif in centerfield is a 4-part floral motif of leaves and tulip-like flowers. Interspersed with several smaller motifs: stars, snowflakes and floral designs. Outer border has repeating tulip branches with two leaves, one of is dominating. Self-fringe of natural cotton at foot end.
Made for Eve Spangler (Aug 17, 1825 - Nov. 21, 1895), obviously before she married Daniel Trimmer in the same year coverlet was made (1844).
Jacob C. Shriver (1816-1896) working 1840-1856
Provenance
Passed down within Spangler family in unknown manner to Edna Spangler Keefer, then to daughter.
Woven piece is 92 inches long with 4 inch fringe = 96 inches long
84 inches wide with 3-inch fringes on both sides = 90 inches
Condition
Good
Condition Date
2015-02-09
Condition Notes
Generally good with brown stains along top/head.
Object ID
G.09.03.14
Notes
See donor's note about Eve Spangler in file. Eve married Daniel Trimmer, a farmer in Tyrone Twp., and they had Sarah Ann Eliza who grew up to marry her 2nd cousin Franklin S. Spangler.
Coverlet passed to Franklin and Annie's son Charles then to his had a daughter Edna who had a daughter Betsy (donor).
Weaver Jacob C. Schriver also cited in :
1. Heisey, John W., compiler. A Checklist of American Coverlet Weavers. Williamsburg, VA: The Colonial Wmsbrg. Foundation, 1978. p.103
3. Anderson, Clarita. American Coverlets and Their Weavers. Wmsburg, VA, 2002. p.208
Place of Origin
Hampton, Adams County, Pennsylvania
Credit
Gift of Betsy Keefer in memory of the Spangler family quilters, Heritage Center Collection
Cast-iron toy tri-motor Fokker aquaplane, painted yellow. Made of multiple castings fitted and securred with screws. Three wire spring cables are fitted to pulleys under plane, allowing the 4 rubber wheels to turn the 3 propellers and activate a noisemaker. Raised letters atop wings spell "FRIENDSHIP". "NX4202" is on tail and "Fokker" is on left side of fuselage. All letters painted blue. Inside hollow fuselage is "HUBLEY." Gold seal on left end of wing reads "It's a Hubley Toy". Profile of Earhart is cast into one of the two rear windows on left side.
The Friendship was flown across the Atlantic from Newfoundland to Wales, on June 17, 1928, with Amelia Earhart aboard. She was only a passenger, but this event won her immense fame, including a ticker tape parade in New York City, and started her career as a major celebrity. (see Notes on why this plane was made.)
Provenance
Plane was given to donor by his friend Charlie Reiger (sp?).
Moderate overal loss of paint; rust on exposed metal; cracking rubber on wheels.
Object ID
G.88.9
Notes
Hubley Mfg. Co. was commissioned by Pittsburgh industrialist Arthur E. Braun (1876-1976) to make 22 yellow aquaplanes modeled on Earhart's Friendship. Earhart signed each one and Braun gave the planes out as gifts at a reception in honor of Earhart, held at his own residence in Pittsburgh in June of 1929. This plane is unsigned, suggesting perhaps that this example may have been a factory extra.
In 1932, Earhart flew solo across the Atlantic, again achieving acclaim as the 2nd person and 1st woman to do so. She received the Distinguished Flying Cross from Congress, the gold medal of the National Geographic Society and the Cross of the Legion of Honor from France.
Place of Origin
Lancaster
Credit
Gift of Samuel S. Snyder, Heritage Center Collection
Fraktur birth certificate for Lydia Glasz / Glass, daughter of Leonard Glass and wife Christina, nee German. Hand drawn and colored on paper. Unusual confronting women with yellow dresses and red parasols flank central textblock within border. Tree of life above textblock; undulating plant w/ flowers sit on shelf at sides. Triple-line outside border.
German text translates to "Lydia Glasz daughter of Leonard Glasz and his wife Christina a born German. Was born 25th day of Jan. in the year of our Lord 1811.
Some buckling of paper overall. Some bleeding of ink, causing brown marks around letters; also in entire upper left corner. Small 1.4" brown streak below the word "Christina" in center panel.
Condition report of 1986 by the Conservation Center for Art and Historic Artifacts in Phila. in file. No documented treatment. Matted and framed in 1996 by conservator Brian Howard.
Object ID
P.77.12
Notes
Similar to designs of Plate #61 in Weiser & Heaney, Penna. German Fraktur of The Free Library of Phila., v.1.
Research: Ancestry.com gives the marriage of fraktur recipient Lydia Glass to John Kempfer on 20 Nov. 1828 in Ephrata at the Bethany United Church of Christ. Husband John was born 19 Feb. 1809, died 4 April 1865. Lydia died 24 June 1853. Their daughter Elizabeth Kempfer (1836-1909) married David Rudy Buch (1834-1925) and lived in Lititz.
Ancestry also gives the 1810 Census in Earl, Lancaster Co. that lists Leonard Glase with 4 household members under 16 yrs., 1 at 16-25 yrs., and 2 over 25 yrs. Total of seven in home. Lydia was born the following year in 1811.
Place of Origin
Lancaster County
Credit
Gift of the James Hale Steinman Foundation, Heritage Center Collection
Glove stretcher is cast, nickel-plated brass (?). Made of two opposing lengths of tapered, rounded metal, spring operated. Dog's leg shape tool has handle cast with raised, scrolled decoration. Opposite end is tapered so it fits into glove fingers for stretching after being heated. The larger end of the taper is inset with lead for holding heat.
Inscriptions: "THE / FOSTER GLOVE STRETCHER" is on one handle and the other has "PATENTED JULY 27, 1888."
Provenance
Collected by Lillian Hollings Kiker, born to Scottish Americans who lived in New Jersey. Born (1912) and lived in New Jersey, last of Egg Harbor, she was active with quilting, sewing, knitting & crocheting. Collection inherited by donor when her mother passed away.
Flat shaped tool is constructed of two sheet brass sides riveted together at the handle end, allowing a flat triangular iron blade that is sandwiched between to slide out at the other end for cutting. Blade slides via a small riveted guide that slides along a slot in the brass sides. Cutter's brass sides have a fleur-de-lis-shaped handle and scalloped sides and each slot has a measuriing scale numbered from one to ten.
Inscription: The sliding guide on both sides of the slot reads "D.M.CO. / PAT SEPT. 3, 72 / BPT.CONN."
Provenance
Collected by Lillian Hollings Kiker, born to Scottish Americans who lived in New Jersey. Born (1912) and lived in New Jersey, last of Egg Harbor, she was active with quilting, sewing, knitting & crocheting. Collection inherited by donor when her mother passed away.
Button-hole cutter, creaser or marking tool is silver plated ferrous metal.
In form of a miniature spoon with a blade instead of a bowl. Blade is eye-shaped with raised midline extending from tip to tip. Edges of blade are fairly sharp. Handle end has the bust of a crowned femal monarch with long flowing hair and necklace above a decorative base of scrolls surrounding a cabochon. Shaft of tool is similar to an architectural column. Entire handle is made of two identical halves, cast and joined with side seams visible.
Provenance
Collected by Lillian Hollings Kiker, born to Scottish Americans who lived in New Jersey. Born (1912) and lived in New Jersey, last of Egg Harbor, she was active with quilting, sewing, knitting & crocheting. Collection inherited by donor when her mother passed away.
Some tarnish overall. Large dent in one cabochon and small dent in the other.
Object ID
G.05.15.19
Notes
See another example of this ring found on internet in this file. Iguala is a town near the renowned silvermaking town of Taxco (near the west coast of Mexico) where William Spratling, in the 1930s, famously reinstituted the silver industry and craftsmanship that had died centuries before.
Credit
Gift of Susan Garofola in memory of Lillian Kiker (mother), Heritage Center Collection
Hem gauge or measure of ferrous metal, electroplated nickel silver blade with a sterling silver plated handle. Handle is a pierced foliate design with a rose at top. A heart motif is at center of handle. Blade extends form handle in the form of a ruler 3 inches long. Moveable clamp with pointed tip can be locked in place along gauge.
Possibly made by the Webster Silver Company. Inscription: Marked "STERLING" on both sides of handle with the Webster Silver Company mark alongside - a "W" on an arrow.
Provenance
Collected by Lillian Hollings Kiker, born to Scottish Americans who lived in New Jersey. Born (1912) and lived in New Jersey, last of Egg Harbor, she was active with quilting, sewing, knitting & crocheting. Collection inherited by donor when her mother passed away.
Tatting hook of bone handle shaft of iron hook set into smaller end.
Tool has handle of elongated teardrop shape, somewhat flattened in cross-section. Wire-like shaft with rounded hook on tip is set into handle. Shaft is thicker than hooked end.
Provenance
Collected by Lillian Hollings Kiker, born to Scottish Americans who lived in New Jersey. Born (1912) and lived in New Jersey, last of Egg Harbor, she was active with quilting, sewing, knitting & crocheting. Collection inherited by donor when her mother passed away.
Set of tatting tools, nickel silver plated steel, has four pieces. Each piece has in common the shaped and decorated portions, the handles of the three tools and the needle case body. This feature is a flattened octagonal shape in cross-section, with successive divots ground out with a round grinding wheel. Handles and case all taper along their length.
A. Needle case is 2.75" long and .375" wide. At the heavier end of case is a fitted cap that slides onto a smaller male extension protruding from main body. Seam visible along sides where both halves of case have been joined.
B. Hook on handle is 4" long and .25" wide. Tapers from handle end down to where shaft is attached. Shaft has ball-and-ring at handle, a slight swell along length and a minute hook at tip.
C. Awl is 3.625" long and .25" wide. Same handle as above. Shaft is similar in shape except heavier and shorter and has a sharp tip.
D. Threading tool(?) is 3" long and .5" long. Same handle as above. Shaft is shorter and has a large open loop in a teardrop shape.
Provenance
Collected by Lillian Hollings Kiker, born to Scottish Americans who lived in New Jersey. Born (1912) and lived in New Jersey, last of Egg Harbor, she was active with quilting, sewing, knitting & crocheting. Collection inherited by donor when her mother passed away.
Mogul Cigarette Silk featuring President James Buchanan
Manufactured in New York, circa 1912-1915
Interesting ephemera featuring James Buchanan.
The complete set featured 24 Presidents and were collected then and now.
Mogul was an expensive hand-rolled all-Turkish cigarette that was started by an independent maker in New York City and by 1914 was owned by the American Tobacco Company.
After an anti-trust suit ATC was split into smaller companies with a focus on “standard cigarettes” that could be more efficiently mass-produced and sold at a lower cost. As the tobacco industry became more competitive, finer brands of cigarettes struggled in the marketplace and resorted to marketing methods such as these silks to retain their popularity.
Provenance: Donor found in family items while cleaning.
