Copper pint measure or mug. Straight sides taper in toward mouth with rolled lip edge. Strap handle anchored with 2 rivets at top; one at base. Keyed seam beneath handle. Some tinning remains on interior.
Handle is stamped "(E)ICHHOLTZ". Letter "E" is partially hidden at top.
Provenance
Purchased by Gunnions at Conestoga Auction circa March 1986.
Heritage Center purchased from Gunnion Antiques Aug. 1986
Tom Ryan, The Worlds of Jacob Eichholtz., pp. 1-3 and 82.
Henry Kauffman, American Copper and Brass, p. 119.
Height (in)
4.5
Width (in)
4.5
Diameter (in)
3.25
Condition
Good
Condition Date
2013-11-18
Condition Notes
Interior worn with some corrosion. Handle split below top left rivet. Small to significantly larger dents on sides and bottom. Some scratches from general wear. Surface has been polished and lacquered. Some polish residue visible at both the rolled lip and rolled base.
First "H" and "T" of "ichholtz" are very worn.
Object ID
P.86.3
Place of Origin
Lancaster
Credit
Heritage Center Collection, Acquired through the generosity of the James Hale Steinman Foundation.
Small teacup (A) and saucer (B), white-bodied china. (A) Round teacup has scalloped base including four projecting feet. Rises with an inward curve before curving outward at lip.decorated with applied dark blue petals flanking a circle of applied light blue-painted flowers centering in gold-stampled lettering: " Souvener/ of/ Lancaster/ Pa." Body has molded flowers embossed around top and branch-like handle applied at side. Gold painted trim on one side of handle, the lip, and applied flowers as well as three stamped flowers at each side.
(B) Saucer (4 3/4" dia.) has embossed foliate design on top; small foot ring. Gold painted line on outer edge and inner line circle at central depression. Does not match teacup and may be a later addition.
(A) Teacup stamped on bottom with a crown over a shield with the monogram of "TGC"(?). Impressed nearby is a number, possible "1912" or "1917". (B) Saucer is stamped "MADE IN GERMANY" within a circle. The number "50" is stamped in gold.
Provenance
Donor believes this set was purchased at Woolworth's store in Lancaster.
Fraktur birth certificate for Lydia Glasz / Glass, daughter of Leonard Glass and wife Christina, nee German. Hand drawn and colored on paper. Unusual confronting women with yellow dresses and red parasols flank central textblock within border. Tree of life above textblock; undulating plant w/ flowers sit on shelf at sides. Triple-line outside border.
German text translates to "Lydia Glasz daughter of Leonard Glasz and his wife Christina a born German. Was born 25th day of Jan. in the year of our Lord 1811.
Some buckling of paper overall. Some bleeding of ink, causing brown marks around letters; also in entire upper left corner. Small 1.4" brown streak below the word "Christina" in center panel.
Condition report of 1986 by the Conservation Center for Art and Historic Artifacts in Phila. in file. No documented treatment. Matted and framed in 1996 by conservator Brian Howard.
Object ID
P.77.12
Notes
Similar to designs of Plate #61 in Weiser & Heaney, Penna. German Fraktur of The Free Library of Phila., v.1.
Research: Ancestry.com gives the marriage of fraktur recipient Lydia Glass to John Kempfer on 20 Nov. 1828 in Ephrata at the Bethany United Church of Christ. Husband John was born 19 Feb. 1809, died 4 April 1865. Lydia died 24 June 1853. Their daughter Elizabeth Kempfer (1836-1909) married David Rudy Buch (1834-1925) and lived in Lititz.
Ancestry also gives the 1810 Census in Earl, Lancaster Co. that lists Leonard Glase with 4 household members under 16 yrs., 1 at 16-25 yrs., and 2 over 25 yrs. Total of seven in home. Lydia was born the following year in 1811.
Place of Origin
Lancaster County
Credit
Gift of the James Hale Steinman Foundation, Heritage Center Collection
Glove stretcher is cast, nickel-plated brass (?). Made of two opposing lengths of tapered, rounded metal, spring operated. Dog's leg shape tool has handle cast with raised, scrolled decoration. Opposite end is tapered so it fits into glove fingers for stretching after being heated. The larger end of the taper is inset with lead for holding heat.
Inscriptions: "THE / FOSTER GLOVE STRETCHER" is on one handle and the other has "PATENTED JULY 27, 1888."
Provenance
Collected by Lillian Hollings Kiker, born to Scottish Americans who lived in New Jersey. Born (1912) and lived in New Jersey, last of Egg Harbor, she was active with quilting, sewing, knitting & crocheting. Collection inherited by donor when her mother passed away.
Flat shaped tool is constructed of two sheet brass sides riveted together at the handle end, allowing a flat triangular iron blade that is sandwiched between to slide out at the other end for cutting. Blade slides via a small riveted guide that slides along a slot in the brass sides. Cutter's brass sides have a fleur-de-lis-shaped handle and scalloped sides and each slot has a measuriing scale numbered from one to ten.
Inscription: The sliding guide on both sides of the slot reads "D.M.CO. / PAT SEPT. 3, 72 / BPT.CONN."
Provenance
Collected by Lillian Hollings Kiker, born to Scottish Americans who lived in New Jersey. Born (1912) and lived in New Jersey, last of Egg Harbor, she was active with quilting, sewing, knitting & crocheting. Collection inherited by donor when her mother passed away.
Button-hole cutter, creaser or marking tool is silver plated ferrous metal.
In form of a miniature spoon with a blade instead of a bowl. Blade is eye-shaped with raised midline extending from tip to tip. Edges of blade are fairly sharp. Handle end has the bust of a crowned femal monarch with long flowing hair and necklace above a decorative base of scrolls surrounding a cabochon. Shaft of tool is similar to an architectural column. Entire handle is made of two identical halves, cast and joined with side seams visible.
Provenance
Collected by Lillian Hollings Kiker, born to Scottish Americans who lived in New Jersey. Born (1912) and lived in New Jersey, last of Egg Harbor, she was active with quilting, sewing, knitting & crocheting. Collection inherited by donor when her mother passed away.
Some tarnish overall. Large dent in one cabochon and small dent in the other.
Object ID
G.05.15.19
Notes
See another example of this ring found on internet in this file. Iguala is a town near the renowned silvermaking town of Taxco (near the west coast of Mexico) where William Spratling, in the 1930s, famously reinstituted the silver industry and craftsmanship that had died centuries before.
Credit
Gift of Susan Garofola in memory of Lillian Kiker (mother), Heritage Center Collection
Hem gauge or measure of ferrous metal, electroplated nickel silver blade with a sterling silver plated handle. Handle is a pierced foliate design with a rose at top. A heart motif is at center of handle. Blade extends form handle in the form of a ruler 3 inches long. Moveable clamp with pointed tip can be locked in place along gauge.
Possibly made by the Webster Silver Company. Inscription: Marked "STERLING" on both sides of handle with the Webster Silver Company mark alongside - a "W" on an arrow.
Provenance
Collected by Lillian Hollings Kiker, born to Scottish Americans who lived in New Jersey. Born (1912) and lived in New Jersey, last of Egg Harbor, she was active with quilting, sewing, knitting & crocheting. Collection inherited by donor when her mother passed away.
Tatting hook of bone handle shaft of iron hook set into smaller end.
Tool has handle of elongated teardrop shape, somewhat flattened in cross-section. Wire-like shaft with rounded hook on tip is set into handle. Shaft is thicker than hooked end.
Provenance
Collected by Lillian Hollings Kiker, born to Scottish Americans who lived in New Jersey. Born (1912) and lived in New Jersey, last of Egg Harbor, she was active with quilting, sewing, knitting & crocheting. Collection inherited by donor when her mother passed away.
Set of tatting tools, nickel silver plated steel, has four pieces. Each piece has in common the shaped and decorated portions, the handles of the three tools and the needle case body. This feature is a flattened octagonal shape in cross-section, with successive divots ground out with a round grinding wheel. Handles and case all taper along their length.
A. Needle case is 2.75" long and .375" wide. At the heavier end of case is a fitted cap that slides onto a smaller male extension protruding from main body. Seam visible along sides where both halves of case have been joined.
B. Hook on handle is 4" long and .25" wide. Tapers from handle end down to where shaft is attached. Shaft has ball-and-ring at handle, a slight swell along length and a minute hook at tip.
C. Awl is 3.625" long and .25" wide. Same handle as above. Shaft is similar in shape except heavier and shorter and has a sharp tip.
D. Threading tool(?) is 3" long and .5" long. Same handle as above. Shaft is shorter and has a large open loop in a teardrop shape.
Provenance
Collected by Lillian Hollings Kiker, born to Scottish Americans who lived in New Jersey. Born (1912) and lived in New Jersey, last of Egg Harbor, she was active with quilting, sewing, knitting & crocheting. Collection inherited by donor when her mother passed away.
Set of 3 steel tatting hooks, no handles. All are similar with round, tapering shanks that terminate in tiny hooks of differing sizes. Theaded at other end for fitting into a handle, now missing. Double ring turnings adjacent to threads.
Provenance
Collected by Lillian Hollings Kiker, born to Scottish Americans who lived in New Jersey. Born (1912) and lived in New Jersey, last of Egg Harbor, she was active with quilting, sewing, knitting & crocheting. Collection inherited by donor when her mother passed away.
