Silver basket by John McMullin, Philadelphia, c. 1800. In so far that many utensils for the table were made of silver, on ewould naturally think that such an object would have been very attractive for serving cake. Length 12 1/2 inches, width 8 3/8 inches. Courtesy Winterthur Museum
Provenance
Photographs from the estate of Henry Kauffman. Winterthur Museum accession number: 59.335c
Straight sided tankard made by Jacob Boelen of New York, probably early in the 18th century. The cocoon shaped thumbpiece, the cast decorations and the cutleaf border design are typical feateres of early tankards made in New York. Height, 7 1/8 inches. Courtesy Winterthur Museum
Provenance
Photographs from the estate of Henry Kauffman. Winterthur Museum accession number: 57.94
Very elegant coffee pot made by Jacob Hurd, Boston, in the second half of the 18th century. This form ocould have been raised from a disc, or mde from a sheet with aoint under the spout or the handle. the latter method was used over a long span of time, but was most widely followed after rolled sheet became available. The lid was probably shaped in a swage. Courtesy Winterthur Museum
Provenance
Photographs from the estate of Henry Kauffman. Winterthur Museum accession number: 60.1048
An example of an attractive beaker made by Samuel Kirk, of Baltimore, Maryland, about 1825. The Samuel Kirk Company is the oldest manufactureer of silver objects in America. Courtesy Winterthur Museum
Provenance
Photographs from the estate of Henry Kauffman. Winterthur Museum accession number: 61.961
Caudle cup made by Jeremiah Dummer (1645 - 1718), Boston, Massachusetts. The cast handles were used by two contemporaries of Dummer. The gadrooned pattern around the base was also a popular proceuder at the time he worked. Courtesy Winterthur Museum
Provenance
Photographs from the estate of Henry Kauffman. Winterthur Museum accession number: 60.1053
Pair of beakers made by Myer Myers. The strips of silver on the bottom edge of the beakers was drawn in a manner similar to the process used in making the similar part for the cup. He made many other attractive objects of silver. Courtesy Winterthur Museum
Provenance
Photographs from the estate of Henry Kauffman. Winterthur Museum accession number: 61.157.1, 2
An extremely simple but charming cup made by John Dixwell in Boston c. 1698. The handles were cast out cut from strips of heavy silver and soldered to the body. The facets left by the planishing hammer can be faintly seen, and his marke is tatefully stamped near the top of the left handle. Courtesy Winterthur Museum
Provenance
Photographs from the estate of Henry Kauffman. Winterthur Museum accession number: 65.1556