Brass spoon mold of two parts that mate to allow molten metal to be poured into bowl end of spoon mold via its funnel opening. Squared tangs project on top and bottom of mold at midpoint.
Mold will create spoon with moderately large, oval bowl, round stem and flaring, flattened handle with rounded terminal and raised center ridge on top. Rattail support under bowl.
Diminutive hammer has elongated steel head; tapered cylinder end and thin flattened opposite end. Long hardwood handle mortised into head is wide and flat at head end and swelled to a rounded oval shape before tapering to blunt point at terminal.
Provenance
Donor was given hammer mid 1970s by an acquaintance, Frances Geiger, a "maiden lady from Quarryville." Attribution to Gorgas was stated by Ms. Geiger at that time. (Research indicates Frances was a teacher living in Millersville.)
Handmade sticker on hammer, now removed, had "Circa 1763-1798". These dates relate to Gorgas Sr. rather than Jr. The father appeared on Cocalico tax records by 1763 and died 1798.
Head has some dark tarnish. Handle is smooth and polished with some dark stains. Two small nails driven into handle end as it protrudes at top of head.
Object ID
G.08.19.1
Usage
Gorgas, Jacob, Jr. (b. circa 1763-1828)
Credit
Courtesy of LancasterHistory, Lancaster, Pennsylvania.
Diminutive hammer has elongated steel or iron head; tapered cylinder end and a tapering, flattened, thin end. Long hardwood handle is square-mortised into head and has a swell near opposite end with a blunt tip.
Provenance
Donor states the hammer was used by clockmaker Martin Shreiner (1769-1866), his great, great, great grandfather. Donor donated a signed statement by Edward D. Glass (1881-1962) that the hammer was purchased by him from the Shreiner estate sale at 136 E. Walnut St. in Lancaster, apparently around 1895 or 1896. (see file) Glass was a paperboy in that district of town and lived with his parents Daniel & Mary at 556 N. Shippen St. He would have been 14 or 15 yrs. old when he bought the hammer.
Head has some considerable corrosion. Moderate wear and soil on handle with some minor loss of wood near terminal. Head is loose on handle and small nail has been driven into handle end as it protrudes at top of head.
Object ID
G.96.31.2
Usage
Shreiner, Martin
Credit
Gift of Paul A. Mueller, Jr., Heritage Center Collection
Clock wheel cutting machine used by Lancaster clockmaker Martin Shreiner, Sr. Made of steel and brass with turned wood handle knob on crank. Main frame of tool is steel resting on four rounded, downward-curving legs with coin-shaped feet. Many moving parts, arms and cranks/screws, including the swiveling cutting yoke/frame at top (cutter blade with arbor/spindle missing) and the shaped index arm that "reads" the holes on the 13"-diameter brass wheel furnished with concentric circles of surface holes.
The LaFonds call this a very sophisticated machine, incorporating Swiss, German and English ideas/influences. This indicates to them that the machine was made in America, very likely by Shreiner himself. It was imperative for clockmakers to own this tool to practice their trade. Few survive. This machine was first described in the early book or article (LCHS Bulletin) printed in 1917(or 1919) & 1939 by D. McGee who wrote about Lancaster clockmaking. Ed believes this machine to be "the finest American engine in existence" and that it very well may have been made by Shreiner, probably in the 1790s. The cutter blade was used to cut the teeth on the large brass wheels that turn the pinions. There would have been either a slitting cutter or a form cutter used. Carter Harris says form cutters were used by the 1790s.
Attributed to Martin Shreiner (1769-1866).
An 8x10 B&W photo is in picture file under "clocks." Also slide is in slide collection, #14-3-11.
Lancaster Borough, most likely
Provenance
Owned by two brothers, Samuel K. and William L. Fraser, clockmakers who lived in Lincoln (just west of Ephrata) and grandsons of clockmaker William Fraser (1801-1877), then to early collector Earl T. Strickler (FNAWCC) who had it on display at the Columbia Clock and Watch Museum. Upon Strickler's sudden death circa 1974, it was sold by his widow, Mary Jane Strickler, to Edward F., Jr. and Virginia A. LaFond who removed rust and kept it on a window sill. They then traded it to dealer Jamie Price for some clocks. Price had it on sale at the 2004 Philadelphia Antiques Show in mid-April where, as representative for the von Hess Foundation, Tom Cook, purchased it for this museum's collections.
Ed LaFond believes the Fraser family was related to the Gorgas family, thus they were in a position to inherit tools. Due to this, it was believed at first that both the machine and the scribe were from the Gorgas family. However, LaFond believes the Frasers were also related to the Shreiners. Stacy Wood claims this machine was one of Martin Shreiner's tools (Vol. 96, LCHS Journal).
Pitting on steel surfaces, slight discoloration on brass parts, signs of wear overall.
Object ID
G.04.19.1
Notes
Information from: Clockmakers of Lanc. Co., Wood/Kramer, 1977, p. 142. 225 Years of Timepieces (Catalog of 1st Annual Exh. of NAWCCM, 1979), p. 63. Stacy Wood researched origins and provenance of these tools and wrote article in Vol. 96 #4 of LCHS Journal. Conversations with Virginia LaFond ( 5/19/04), Ed LaFond (7/6/04) and Carter Harris (7/7/04).
Place of Origin
Lancaster
Usage
Shreiner, Martin
Credit
Gift of the Richard C. von Hess Foundation, Heritage Center Collection
P95.02.01A: Crystal ball is a sphere of clear glass containing tiny interior bubbles and barely perceptible striations on the surface corresponding to lines of latitude.
P95.02.01B: Base for ball is a turned disk of pine with recessed top in which to
Place of origin is unknown.
Provenance
9/07/2012 - Transferred from HC Collections; 12/29/94 - Purchase from Book Haven 146 N. Prince Street, Lancaster, PA 17603
Glass ball has minor surface abrasions or imperfections; some small nicks and scratches in the base, and a 1/2" area of finish loss on the center of the bottom.
Sketch box made of brown alligator skin / leather over wood. Flat rectangular base w/ raised section at right end has two sunken containers. Top one is oval with ornate raised decoration on hinged silver(?) lid; beaded oval trim at base marked "PAT. March. 25.90." Oval well lined with suede. Lower container has alligator-covered round hinged lid leading to another hinged metal lid leading to a small ink jar within.
Place of origin is unknown.
Large part is a padded alligator-covered lid hinged at top. Underside of lid has pouches of light brown leather. Writing/sketching surface has a blue paper blotter secured by leather corners. Leather loop at hinge holds a metal pen decorated with raised beaded rings.
Inscription on underside is pencil script: "From Charles / Xmas 1890". Alongside is a sticker with name and address of donor.
Provenance
Donor acquired this and many other Mifflin pieces from the Mifflin estate and, then donated it to the Heritage Center in 1995.
The alligator skin and leather are cracked, especially along the spine and bottom of the folder. The box with the two compartments is uneven on the top. The lid of the oval shaped compartment is tarnished, and the snap is broken. The ink jar is staine
Object ID
G.95.36.2
Credit
Gift of Mr. and Mrs. Lamar L. Libhart, Heritage Center Collection
Platter of ironstone transferware with clear glaze. Rectangular with clipped corners, recessed bottom and moderately wide sides that extend outward. White body is devoid of decoration except for black transfer scene of a long bridge spanning a river, 5 people in foreground, town at right end of bridge and another in the distance on right bank. Underside has apparent impressed mark and transfer maker's mark at center: under a spread eagle with shield is a "sign" reading "COLUMBIA BRIDGE ON THE SUSQUEHANNA". Below it is "W.R.", indicating maker William Ridgway & Co. Sticker on bottom is: "$390" and "CLP". This river scene is a variation of the print done by William Henry Bartlett (see G98.12.21).
Shelton or Hanley, England
Provenance
Purchased in Adamstown Antiques Gallery for Heritage Center collection. Transferred from Heritage Center, December 2012.
Copper teakettle with round body, gooseneck spout, very low domed lid w/ scrolled knob of sheet copper riveted onto lid with a hand-cut washer added under lid, suggesting repair or replacement. Curved handle hinges onto tapered plinth tab bases with two rivets each. Vertical dove-tailed side seam opposite single-seamed spout. Dove-tailed bottom.
Touchmark on top of handle is "R..REED." within a rectangular reserve with serrated ends.
Made by Robert Reed, working in Lancaster 1771-1779, then 1785-1795.
Provenance
Purchased by Heritage Center from Philip Bradley Antiques
Transferred from Heritage Center to LancasterHistory.org December, 2012.
Tax assessment lists Robert Reed 1786-1793.
Kauffman, Henry J. American Copper and Brass. New York: Bonanza, 1979.
Coppersmith info from Shelley Horvath Posten (dau. of Don Horvath), 2009
Copper dented and scratched overall, polish residue at handle hinges. Side handle break repaired with sheet iron patch secured to outside with two iron rivets. Knob appears to be a repair or a replacement.
Object ID
P.80.131
Place of Origin
Lancaster
Credit
Heritage Center Collection. Purchased through the generosity of the James Hale Steinman Foundation,
Round copper vessel, shaped like a teakettle, but without a spout. A shaped strap handle is attached to each side of the opening at shoulder with riveted brackets. The handle widens near the middle, where the maker's mark is stamped: "P & B. SCHAUM"
Body is dovetailed to base, one dovetailed vertical seam, handle attached to flanges held in place by two rivets each. Pot insert is missing. Another insert (S.13) was purchased as a replacement.
Vessel has multiple dents, creating a general distortion overall. Surface is also tarnished and has drip stains running down the sides. The bottom is very worn and has numerous stains. Blueish-white stains on the inside. Polish residue on handle.
Object ID
P.77.61
Place of Origin
Lancaster
Related Item Notes
See broadside for Benjamin Schaum's hardware store, P.91.02
Credit
Heritage Center Collection. Purchased through the generosity of the James Hale Steinman Foundation
Copper Teakettle has large 7-quart round body, domed lid with brass button knob attached to a metal base visible inside. Goose-neck spout. One vertical dove-tailed seam opposite spout, straight seam along top of spout and short seam underneath. Dove-tailed bottom. Arched handle hinged at chordal sector tab bases with three rivets each.
Maker's mark on top center of handle within serrated rectangular reserve: "7 JOHN.GETZ 7"
Made by John Getz (working 1801-1840).
Provenance
See 2009 materials sent by Shelley Horvath Poston (dau. of Don Horvath).
Copper has many dents and scratches. Significant 3 1/2" series of dents down the side opposite the spout and one under lid finial. Heavily soldered repair joint at base of spout.
Object ID
P.80.115
Place of Origin
Lancaster
Credit
Heritage Center Collection. Purchased through the generosity of the James Hale Steinman Foundation
