Silver beaker or handless cup; flared form with double lip.
Engraved "J C M" in script lettering on the side; engraved "C. MAYER" in block letters on the underside of the base. The base also has maker's mark in the center, "W H" in a small rectangle with a scrolled serif on the bottom of the left stroke of the "H".
According to John J. Snyder, Jr, "C. Mayer" is Christopher Bartholomew Mayer (c. 1756 - Aug. 11,1815 and son of George Ludwig Mayer), a wealthy Lancaster hardware merchant who lived in the elegant stone house built by his father-in-law, George Burkhard (c. 1721-1783), a prominent Lancaster joiner, in 1764, at the NW corner of Orange and Duke Sts. Christopher B. Mayer married Jan. 2, 1783, to Susannah Burkhard(t) (1761-1848), later producing 8 children. Mayer was prominent in politics, and twice represented Lancaster in the state Senate."
Snyder continues: "The "JCM" of the monogram may be identified, tentatively, as Juliana (Julia) Catherine Mayer (1806-1857), later the wife of George May Keim of Reading." They married in 1827. Keim was a US Congressman, representing the 9th District in the U.S. House of Representatives (1838-1843) He also served as Mayor of Reading in 1852. They are buried in the Charles Evans Cemetery in Reading. Juliana (Julia) was apparently a daughter of Christopher & Susannah Mayer.
At time of acquisition,this beaker was believed to be the only piece of Wm. Haverstick hollow ware then known. With its history of early ownership by a very prominent Lancaster family, it adds a valuable historical dimension.
Provenance
Purchase from dealer Harry Hartman. Previous history unknown.
Tall case clock w/ 8-day movement housed in a cherry Chippendale style case with scroll pediment, carved floral rosettes and three flame finials. Arched glass door and side lights. Partially engaged, smooth columns at front corners, forming part of the hinged door.
Brass dial has Roman numeral chapter ring, C-scroll and vining foliate engraving at spandrels as well as above and below moon wheel which is painted with a star-spangled sky and moon with face. Engraved "Wilton Atkinson" on lower dial.
Waist has broken arch door and recessed, plain quarter columns. Base has raised, scalloped panel at front with quarter columns that match those in the waist section. Feet are bold ogee bracket style.
Atkinson is believed to have been the son of Matthew Atkinson of Lampeter Twp. Wilton was in the Borough as early as 1763 as a cutler. In tax records, he was listed in 1770 as a watchmaker and in 1772 and 1773 as a clockmaker. He married Anna Maria, daughter of the early Borough clockmaker Abram Laroy. Legend states that Anna Maria also made clocks in Lancaster that were sold bearing her husband's name. The Atkinsons eventually moved to Baltimore where, following his death, Anna Maria conducted business until 1819. (Clockmakers of Lanc. Co.)
Snyder notes on p. 40 of Clockmakers of Lanc. Co, that this case is considered one of the earliest examples of the Chippendale style in Lancaster Co., based on the brief working career of Atkinson (1770-1773).
Provenance
Owned by Dr. George Rohrer, then to son Henry A. Rohrer, then to daughter Mary Louise Webster. Tape adhered to reverse side of dial has the name of the donor's father, "Henry Rohrer/ 9-22-87."
Case has been overcleaned, finished with a glossy varnish then handrubbed with steel wool to remove gloss. Vertical scratch on right side of base; feet marred. Crack at lower right corner of base, below raised panel. There are about nine nail holes over the expanse of the tympanum suggesting missing carving. Heavy dent on dial at left edge, center, and hammer marks at this point on reverse side. Lower left corner distorted.
Object ID
G.01.49.1
Notes
Entry for Wilton Atkinson in "Clockmakers of Lancaster Co. and Their Clocks 1750-1850" notes that: "Atkinson married Anna Maria, a daughter of the early Borough clockmaker Abrum Laroy and legend states that she also made clocks in Lancaster that were sold bearing her husband's name. "
Brochure of the First Reformed Church (UCC) notes that in the 1760s, "the French Laroys" belonged to this church. "One chronicler called the LeRoy sisters (four daughters of a local clockmaker) the 'Belles of the congregation.'... Anna Maria, the youngest of the sisters, learned her father's trade and was said to be 'as good a clockmaker' as he was. She and her husband, Wilton Atkinson, took over the family business." (Note: Abrum Laroy died in 1763).
Above brochure is http://visithistoricalancaster.com/pdf/02LP109 HOW-FR-UCC
Call to church office & conversation with paster Dana Schlegel offered no clues to source of above information (Jan. 2017).
Place of Origin
Lancaster
Credit
In memory of Dr. George Rohrer and Mrs. & Mrs. Henry A. Rohrer by Mary Louise Webster, Heritage Center Collection
8-day clock works by George Hoff, Jr. (1788-1822) installed in a curly maple Federal style case signed by either J(acob) Stein/Stine or J(osiah) Shufflebottom (inside waist section). White painted dial signed with maker's name and "Lancaster". Moon wheel above. Scroll pediment has turned roundels and urn finials. Bonnet has applied carving under center finial, free-standing turned columns at front and back, arched side lights and reeded base moldings. Chamfered quarter columns on waist and base. Reeded moldings at top and bottom of waist. Door has shield inlay at lock escutcheon and ghosting from a now-removed metal escutcheon. French bracket feet.
"Hertzler" is etched onto top surface of bonnet top. Signed inside waist: appears to be either Josiah Shufflebottom or Jacob Stein/Stine.
Provenance
Donor states clock was part of the furnishings in the home of her grandparents John B. and Emma (Groff) Hertzler at 131 E. Orange St., Lancaster. Hertzler was a banker at The Lancaster Trust Company in early 20th c..
John J. Snyder states Stine was listed on tax lists 1817-19 and Shufflebottom worked c. 1811-1848. Both were cabinetmakers in Lancaster Borough.
Dial paint is crazed. Base has large cracks on both sides and lifting veneer and crack at front. Dents and other scarring on cove molding at top of base. Small cracks on left side of hood.
Works cleaned and repaired by Paul Warfel, 1980. Glazing in door replaced by curator Bruce Shoemaker, 1983, due to crack.
Object ID
G.77.25.1
Place of Origin
Lancaster
Credit
Gift of Elizabeth H. Nichols in memory of John and Emma Groff Hertzler, Heritage Center Collection
Pewter flagon, one of a pair, made by Heyne and presented to the Warwick Congregation (now the Brickerville United Lutheran Church) for use as part of a communion service. Cylindrical tankard form of top half joins a bottom section that begins to swell until it flares out dramatically at bottom. Has three applied cherub's head feet bordered with wrigglework. Applied spout. Heyne then innovated by departing from German forms by using three English features: an applied hollow handle, a double-domed lid and an erect chairback thumbpiece.
At midline below three raised bands is an engraved two-lobed crown above large initials "MH" filled with wrigglework. Underside is stamped with Heyne's mark, a crown over the initials "ICH", and "LANCASTER" below. Undated, although the other flagon of this pair is marked "1776" on bottom.
Johann Christoph Heyne was working on West King Street in Lancaster Borough, 1752-1781.
Provenance
Possibly commissioned from Heyne by William and Mary Huber of this congregation and presented to the church with their initials.
Pewter flagon, one of a pair, made by Heyne and presented to the Warwick Congregation (now known as the Brickerville United Lutheran Church) for use as part of a communion service. Cylindrical tankard form of top half joins a bottom section that begins to swell until it flares out dramatically at bottom. Has three applied cherub's head feet bordered with wrigglework. Applied spout. Heyne then innovated by departing from German practice by using three English features: an applied hollow handle, a double-domed lid and an erect chairback thumbpiece.
At midline below three raised bands is engraved a two-lobed crown above large Roman initials "WH" filled with wrigglework. The underside of flagon is stamped with a crown over the initials "ICH". Below this is stamped "LANCASTER" and to the right is engraved "1766".
Johann Christoph Heyne was working on West King Street in Lancaster Borough, 1752-1781.
Provenance
Pair of flagons possibly commissioned from Heyne by William and Mary Huber of this congregation and presented to the church with their initials. Remained in use over the years until the congregation decided in 1997 to find a safe place for this valuable communion set.
Note: Another pair of flagons was ordered from Heyne in 1766 by Trinity Lutheran Church. Heyne also used the English round, hollow handle on those. However, that pair differs from ours, and all other later Heyne flagons, in that he incorporated the English style double domed lid and erect thumbpiece.
Overall wear: abrasions, nicks and dents. Dents on lid top. Large scratch at lower right of "H" Dark stains and small pinhole in thumbpiece. Interior has several small areas of deep scratches.
Object ID
P.97.08.2
Place of Origin
Lancaster
Credit
Acquired through the generosity of the James Hale Steinman Foundation and Friends of the Heritage Center Museum, Heritage Center Collection
Round copper vessel, shaped like a teakettle, but without a spout. A shaped strap handle is attached to each side of the opening at shoulder with riveted brackets. The handle widens near the middle, where the maker's mark is stamped: "P & B. SCHAUM"
Body is dovetailed to base, one dovetailed vertical seam, handle attached to flanges held in place by two rivets each. Pot insert is missing. Another insert (S.13) was purchased as a replacement.
Vessel has multiple dents, creating a general distortion overall. Surface is also tarnished and has drip stains running down the sides. The bottom is very worn and has numerous stains. Blueish-white stains on the inside. Polish residue on handle.
Object ID
P.77.61
Place of Origin
Lancaster
Related Item Notes
See broadside for Benjamin Schaum's hardware store, P.91.02
Credit
Heritage Center Collection. Purchased through the generosity of the James Hale Steinman Foundation
Stoneware storage jar with applied lug handles, salt-glazed, gray ovoid body with prominent lip and brushed cobalt blue decoration on sides and at applied handles. One side has a bifurcated flower with oval cartouche centered between flowers. Within cartouche is maker's mark "H GAST/ West Orange/ LANCASTER". Opposing side has a flower with 3 branches.
Gast established himself on W. Orange St. in 1834, but moved to 416 Manor St. in 1838. Thus, this jar was made sometime 1834 to 1838. Gast was the principal supplier of stoneware in the city for over 40 years, His son joined him in the mid 1850s.
Provenance
Unknown.
See Phil Schaltenbrand, "Big Ware Turners," 2002, pp. 18-20.
Clock wheel cutting machine used by Lancaster clockmaker Martin Shreiner, Sr. Made of steel and brass with turned wood handle knob on crank. Main frame of tool is steel resting on four rounded, downward-curving legs with coin-shaped feet. Many moving parts, arms and cranks/screws, including the swiveling cutting yoke/frame at top (cutter blade with arbor/spindle missing) and the shaped index arm that "reads" the holes on the 13"-diameter brass wheel furnished with concentric circles of surface holes.
The LaFonds call this a very sophisticated machine, incorporating Swiss, German and English ideas/influences. This indicates to them that the machine was made in America, very likely by Shreiner himself. It was imperative for clockmakers to own this tool to practice their trade. Few survive. This machine was first described in the early book or article (LCHS Bulletin) printed in 1917(or 1919) & 1939 by D. McGee who wrote about Lancaster clockmaking. Ed believes this machine to be "the finest American engine in existence" and that it very well may have been made by Shreiner, probably in the 1790s. The cutter blade was used to cut the teeth on the large brass wheels that turn the pinions. There would have been either a slitting cutter or a form cutter used. Carter Harris says form cutters were used by the 1790s.
Attributed to Martin Shreiner (1769-1866).
An 8x10 B&W photo is in picture file under "clocks." Also slide is in slide collection, #14-3-11.
Lancaster Borough, most likely
Provenance
Owned by two brothers, Samuel K. and William L. Fraser, clockmakers who lived in Lincoln (just west of Ephrata) and grandsons of clockmaker William Fraser (1801-1877), then to early collector Earl T. Strickler (FNAWCC) who had it on display at the Columbia Clock and Watch Museum. Upon Strickler's sudden death circa 1974, it was sold by his widow, Mary Jane Strickler, to Edward F., Jr. and Virginia A. LaFond who removed rust and kept it on a window sill. They then traded it to dealer Jamie Price for some clocks. Price had it on sale at the 2004 Philadelphia Antiques Show in mid-April where, as representative for the von Hess Foundation, Tom Cook, purchased it for this museum's collections.
Ed LaFond believes the Fraser family was related to the Gorgas family, thus they were in a position to inherit tools. Due to this, it was believed at first that both the machine and the scribe were from the Gorgas family. However, LaFond believes the Frasers were also related to the Shreiners. Stacy Wood claims this machine was one of Martin Shreiner's tools (Vol. 96, LCHS Journal).
Pitting on steel surfaces, slight discoloration on brass parts, signs of wear overall.
Object ID
G.04.19.1
Notes
Information from: Clockmakers of Lanc. Co., Wood/Kramer, 1977, p. 142. 225 Years of Timepieces (Catalog of 1st Annual Exh. of NAWCCM, 1979), p. 63. Stacy Wood researched origins and provenance of these tools and wrote article in Vol. 96 #4 of LCHS Journal. Conversations with Virginia LaFond ( 5/19/04), Ed LaFond (7/6/04) and Carter Harris (7/7/04).
Place of Origin
Lancaster
Usage
Shreiner, Martin
Credit
Gift of the Richard C. von Hess Foundation, Heritage Center Collection
Paperweight or keepsake of carved white marble has a carved reclining sheep, done in bas relief, is lying on a narrow ledge on an inch-thick slab of marble resembling a curved top tombstone. Incised name in block letters below the sheep: "E. M. Howell." Bottom edge below name is relieved with a carved cupid's bow design.
Attributed to Charles M. Howell (4-24-1814 to 4-10-1903).
Provenance
Donor inherited two carvings from her Aunt Annie and Aunt Kate Willson. They were pupils in Charles M. Howell's Sunday School class at First Presbyterian Church and he passed them out as Christmas gifts. Great grandson Dick Witmer states E.M. Howell is certainly Howell's wife Elizabeth Michael who Charles married in 1841. She died 10-22-1877.
Howell was an important in business and civic affairs. He operated a marble yard on N. Queen St. in Lancaster. Other carvings by Howell's employee,
Augustus Beck, are extant. Dick's brother Bob Witmer removed these large carvings (of lions?) that had been at the corner of a Howell residence at East Chestnut and Cherry Sts. to his home outside the city. Additional small carvings are reportedly owned by Lancaster collector Gene Charles.
Paperweight or keepsake of carved white marble has a 3-D carved reclining sheep reclining on a half-inch-thick rectangular base, secured with a screw on underside. Base has chamfered top edges. Thin sheet of red rubber glued to underside of base.
Attributed to Charles M. Howell (4-24-1814 to 4-10-1903).
Provenance
Donor inherited two carvings from her Aunt Annie and Aunt Kate Willson. They were pupils in Charles M. Howell's Sunday School class at First Presbyterian Church and he passed them out as Christmas gifts.
Howell was an important in business and civic affairs. He operated a marble yard on N. Queen St. in Lancaster. Other carvings by Howell's employee,
Augustus Beck, are extant. Dick's brother Bob Witmer removed these large carvings (of lions?) that had been at the corner of a Howell residence at East Chestnut and Cherry Sts. to his home outside the city. Additional small carvings are reportedly owned by Lancaster collector Gene Charles.
Large redware pitcher, sectioned octagonal form with conforming low pedestal base. Applied handle and pulled pouring spout. Orange-red color dark brown manganese mottling with clear glaze overall.
Impressed mark on underside is "C GAST" for Conrad Gast (1813- after 1880).
Prince and James Sts. Lancaster, PA
Provenance
Heritage Center purchased from Ruth Rogers of School House Farm Antiques, New Holland.
Wear at all salient points of the lower body as well as the outside and tip of handle. Two medium chips at opposite sides of lip and several minor chips at spout and sides of lip. Wear at bottom.
Object ID
P.02.04.1
Place of Origin
Lancaster
Credit
Gift of V. Ronald Smith, Heritage Center Collection
Small plate, used as a paten (communion plate). Circular, with single reed brim, marked on bottom with initials "I.CH." and Jacobs touch #169. Double incised lines near brim and single incised line within sunken bottom.
Tankard, lidded barrel form. Copper body with brass handle, shell thumb piece and four bands encircling body. Interior is tinned. Engraved on opposite side from handle, "COMPLIMENTS/ OF/ JOHN G. SCHAUM/ TO/ FRANK J. RIEKER." One of a pair with P00.42.2.
Believed to be a presentation piece given by Schaum in appreciation for all the work he was given in Rieker's brewery. Schaum did copper, tin and sheet iron work and was the son and one-time partner of plumber/ coppersmith John P. Schaum.
Provenance
Collection of J. Harlan Miller sold at Conestoga Auction Oct. 21, 2000.
Tankard, lidded barrel form. Copper body with brass handle, shell thumb piece and four bands encircling body. Interior is tinned. Engraved on opposite side from handle, "COMPLIMENTS/ OF/ JOHN G. SCHAUM/ TO/ JOSEPH HAEFNER." One of a pair with P00.42.3.
Believed to be a presentation piece given by Schaum in appreciation for all the work he was given in Haefner's brewery. Schaum did copper, tin and sheet iron work and was the son and one-time partner of plumber/ coppersmith John P. Schaum.
Provenance
Collection of J. Harlan Miller sold at Conestoga Auction Oct. 21, 2000. Transferred from Heritage Center Dec. 2012.
Heavy tarnish overall. Moderate scratching. Slightly dented in center of and below engraving. Small nicks on rim of lid. Minor corrosion where handle and thumb piece connect to body and on bottom. Some polish residue in crevices.
Copper teakettle with round body, gooseneck spout, very low domed lid w/ scrolled knob of sheet copper riveted onto lid with a hand-cut washer added under lid, suggesting repair or replacement. Curved handle hinges onto tapered plinth tab bases with two rivets each. Vertical dove-tailed side seam opposite single-seamed spout. Dove-tailed bottom.
Touchmark on top of handle is "R..REED." within a rectangular reserve with serrated ends.
Made by Robert Reed, working in Lancaster 1771-1779, then 1785-1795.
Provenance
Purchased by Heritage Center from Philip Bradley Antiques
Transferred from Heritage Center to LancasterHistory.org December, 2012.
Tax assessment lists Robert Reed 1786-1793.
Kauffman, Henry J. American Copper and Brass. New York: Bonanza, 1979.
Coppersmith info from Shelley Horvath Posten (dau. of Don Horvath), 2009
Copper dented and scratched overall, polish residue at handle hinges. Side handle break repaired with sheet iron patch secured to outside with two iron rivets. Knob appears to be a repair or a replacement.
Object ID
P.80.131
Place of Origin
Lancaster
Credit
Heritage Center Collection. Purchased through the generosity of the James Hale Steinman Foundation,
Copper Teakettle has large 7-quart round body, domed lid with brass button knob attached to a metal base visible inside. Goose-neck spout. One vertical dove-tailed seam opposite spout, straight seam along top of spout and short seam underneath. Dove-tailed bottom. Arched handle hinged at chordal sector tab bases with three rivets each.
Maker's mark on top center of handle within serrated rectangular reserve: "7 JOHN.GETZ 7"
Made by John Getz (working 1801-1840).
Provenance
See 2009 materials sent by Shelley Horvath Poston (dau. of Don Horvath).
Copper has many dents and scratches. Significant 3 1/2" series of dents down the side opposite the spout and one under lid finial. Heavily soldered repair joint at base of spout.
Object ID
P.80.115
Place of Origin
Lancaster
Credit
Heritage Center Collection. Purchased through the generosity of the James Hale Steinman Foundation
Copper tea kettle, classic form with gooseneck spout, high dome lid, marked strap handle hinged on "plinth w/ serifs" tab bases. Lid fitted with a crudely fashioned replaced iron or steel mushroom-shaped finial, bent to one side.
Vertical dove-tailed seam on side opposite spout, top seam running length of spout. Dove-tailed bottom.
Tarnished with numerous dents and scratches over body. Two very heavy dents at shoulder, opposite each other and one on bottom. Finial knob bent to one side. Two significant cracks on proper right side at shoulder and one on back.
Object ID
P.01.48.1
Place of Origin
Lancaster
Credit
Heritage Center Collection. Purchased through the generosity of the James Hale Steinman Foundation
Large copper teakettle with rounded body, goose-neck spout and hinged handle having a medium arc, mounted on shaped flanges with three rivets. The domed lid has a small brass mushroom knob (replaced). Dovetailed seams on bottom and vertical seam on side opposite spout. Seamed repair to spout tip.
"F. STEINMAN" is stamped on the handle within a reserve.
Provenance
Transferred from Heritage Center Collection, Dec. 2012
Jack Brubaker, The Steinmans of Lancaster, pp. 11-15.
HJ Kauffman, Early American Copper, Tin & Brass, 1995, pp. 42-43.
HJ Kauffman, American Copper & Brass, 1979, p. 65.
Height (in)
13
Width (in)
16
Condition
Good
Condition Date
2013-11-13
Condition Notes
Many dents and overall wear. HJK says handle slightly shortened (likely done by him). Tip of spout replaced. Plugged hole in bottom. Replaced knob. Stamped name very worn. Tarnished with polish residue where the spout, handle, and lid meet the main body.
Object ID
G.77.14
Notes
When his father died in 1758, John Frederick Steinman, Sr. (1752-1823) moved with his mother to Lititz from his birthplace, Bethlehem, Pennsylvania. His mother remarried a few years later to John Christophe Heyne, a tinsmith and pewterer from Lancaster. The shop of Heyne and Steinman would become known as Steinman's Hardware Store, the oldest hardware store in America.
Place of Origin
Lancaster
Credit
Heritage Center Collection. Gift of Henry J. Kauffman
Traditional tea kettle form made of tinned sheet iron. Now unmoveable handle hinged to oval tab bases with two rivets. Dovetailed vertical seam on side opposite spout: spout has a straight seam along top and also bottom of base section. Dovetail seam around shoulder top. Slightly domed lid has black-painted knob.
Made by George Rogers, tinsmith, (1814-1854, working c. 1848).
For references to G. Rogers, see Kauffman, American Copper and Brass, p. 207. Copy in file.
Also see 1859-60 Directory, p. 143 for reference to George Rogers.
Height (in)
11
Width (in)
11.75
Diameter (in)
8
Condition
Good
Condition Date
2013-11-18
Condition Notes
Interior heavily rusted. Dent to the right of the spout on shoulder. Multiple smaller dents. Multiple score lines, possibly from a rasp, especially on shoulder area.
