Pewter basin, part of the Warwick Congregation's (now known as the Brickerville United Lutheran Church) communion service.
High, rounded sides flare out to a flattened rim with rolled edge. Booge appears to be unhammered. Barns struck his large circular mark with an eagle on the inside of bottom. The left portion of the eagle as well as the letters "BAR" on the bottom are discernible, as well as the "HE" above the eagle.
Probably made in Middletown or Wallingford, Connecticut.
Provenance
The entire communion service remained in use over the years until the congregation decided in 1997 to find a safe place for this valuable communion set. Purchased by the Heritage Center of Lancaster County.
Chinese export bowl of high fired porcelain, polychrome decoration under glaze. Thin walled in nearly hemispherical form sitting on a 3/4" raised foot. Gold-painted rim with red edging. Two goldfish inside bottom. Continuous landscape on exterior is the same repeating Roman or Greek scene of a seated half-robed seated man with dog facing three nude women and seated baby. All set against distant mountains and one tree in foreground.
Glazed soft paste porcelain Gaudy Welsh sugar bowl (A) with lid (B). Handpainted inverted tulips of red and yellow are interspersed with 3 large, dominating deep blue scalloped motifs decorated with copper lustre painted floral decoration. Squat pot-bellied body sits on a low squarish pedestal with scalloped edging. Two molded angular applied handles. Top has round mouth with flared collar extends outward. Domed lid has squarish molded knob finial. Darkened remnant of paper sticker with blurred writing, perhaps "-caster/ --ea set/ --1825."
Provenance
Collected by Harpo and Susan Marx during visits back East from CA. Donated to Heritage Center.
Small free-blown wine or dram glass, Stiegel type. Conical form. Low profile knop on stem. Round pedestal base with concentric ring created by folded foot. Pontil mark on bottom.
Provenance
Purchased by donor Hampton C. Randolph, Sr., for $65 at the sale of the Henry E. Balmer estate, Lancaster, PA on April 20, 1996, then donated to the Heritage Center of Lancaster County.
Round copper vessel, shaped like a teakettle, but without a spout. A shaped strap handle is attached to each side of the opening at shoulder with riveted brackets. The handle widens near the middle, where the maker's mark is stamped: "P & B. SCHAUM"
Body is dovetailed to base, one dovetailed vertical seam, handle attached to flanges held in place by two rivets each. Pot insert is missing. Another insert (S.13) was purchased as a replacement.
Vessel has multiple dents, creating a general distortion overall. Surface is also tarnished and has drip stains running down the sides. The bottom is very worn and has numerous stains. Blueish-white stains on the inside. Polish residue on handle.
Object ID
P.77.61
Place of Origin
Lancaster
Related Item Notes
See broadside for Benjamin Schaum's hardware store, P.91.02
Credit
Heritage Center Collection. Purchased through the generosity of the James Hale Steinman Foundation
Stoneware storage jar with applied lug handles, salt-glazed, gray ovoid body with prominent lip and brushed cobalt blue decoration on sides and at applied handles. One side has a bifurcated flower with oval cartouche centered between flowers. Within cartouche is maker's mark "H GAST/ West Orange/ LANCASTER". Opposing side has a flower with 3 branches.
Gast established himself on W. Orange St. in 1834, but moved to 416 Manor St. in 1838. Thus, this jar was made sometime 1834 to 1838. Gast was the principal supplier of stoneware in the city for over 40 years, His son joined him in the mid 1850s.
Provenance
Unknown.
See Phil Schaltenbrand, "Big Ware Turners," 2002, pp. 18-20.
Redware canning jar, ovoid shape with no handle. Pronounced foot ring and rounded flaring lip with recessed interior to receive a fitted lid (missing). Dark brown manganese decoration with some mottling, streaks and dark spatters. Lead glaze overall except for underside.
Very strong wear with losses. Lip has very large chip and one very small chip at outside edge. Strong losses of glaze at lip. Very strong abrasions at salient point of side, with considerable scattered scratches. Foot ring has three large chips and one very large chip. Soil on inside and underside.
Object ID
G.99.22.1
Place of Origin
Pennsylvania
Credit
Gift of Drs. Irwin and M. Susan Richman, Heritage Center Collection
Clock wheel cutting machine used by Lancaster clockmaker Martin Shreiner, Sr. Made of steel and brass with turned wood handle knob on crank. Main frame of tool is steel resting on four rounded, downward-curving legs with coin-shaped feet. Many moving parts, arms and cranks/screws, including the swiveling cutting yoke/frame at top (cutter blade with arbor/spindle missing) and the shaped index arm that "reads" the holes on the 13"-diameter brass wheel furnished with concentric circles of surface holes.
The LaFonds call this a very sophisticated machine, incorporating Swiss, German and English ideas/influences. This indicates to them that the machine was made in America, very likely by Shreiner himself. It was imperative for clockmakers to own this tool to practice their trade. Few survive. This machine was first described in the early book or article (LCHS Bulletin) printed in 1917(or 1919) & 1939 by D. McGee who wrote about Lancaster clockmaking. Ed believes this machine to be "the finest American engine in existence" and that it very well may have been made by Shreiner, probably in the 1790s. The cutter blade was used to cut the teeth on the large brass wheels that turn the pinions. There would have been either a slitting cutter or a form cutter used. Carter Harris says form cutters were used by the 1790s.
Attributed to Martin Shreiner (1769-1866).
An 8x10 B&W photo is in picture file under "clocks." Also slide is in slide collection, #14-3-11.
Lancaster Borough, most likely
Provenance
Owned by two brothers, Samuel K. and William L. Fraser, clockmakers who lived in Lincoln (just west of Ephrata) and grandsons of clockmaker William Fraser (1801-1877), then to early collector Earl T. Strickler (FNAWCC) who had it on display at the Columbia Clock and Watch Museum. Upon Strickler's sudden death circa 1974, it was sold by his widow, Mary Jane Strickler, to Edward F., Jr. and Virginia A. LaFond who removed rust and kept it on a window sill. They then traded it to dealer Jamie Price for some clocks. Price had it on sale at the 2004 Philadelphia Antiques Show in mid-April where, as representative for the von Hess Foundation, Tom Cook, purchased it for this museum's collections.
Ed LaFond believes the Fraser family was related to the Gorgas family, thus they were in a position to inherit tools. Due to this, it was believed at first that both the machine and the scribe were from the Gorgas family. However, LaFond believes the Frasers were also related to the Shreiners. Stacy Wood claims this machine was one of Martin Shreiner's tools (Vol. 96, LCHS Journal).
Pitting on steel surfaces, slight discoloration on brass parts, signs of wear overall.
Object ID
G.04.19.1
Notes
Information from: Clockmakers of Lanc. Co., Wood/Kramer, 1977, p. 142. 225 Years of Timepieces (Catalog of 1st Annual Exh. of NAWCCM, 1979), p. 63. Stacy Wood researched origins and provenance of these tools and wrote article in Vol. 96 #4 of LCHS Journal. Conversations with Virginia LaFond ( 5/19/04), Ed LaFond (7/6/04) and Carter Harris (7/7/04).
Place of Origin
Lancaster
Usage
Shreiner, Martin
Credit
Gift of the Richard C. von Hess Foundation, Heritage Center Collection
Brass spoon mold of two parts that mate to allow molten metal to be poured into bowl end of spoon mold via its funnel opening. Squared tangs project on top and bottom of mold at midpoint.
Mold will create spoon with moderately large, oval bowl, round stem and flaring, flattened handle with rounded terminal and raised center ridge on top. Rattail support under bowl.
Clear, free-blown leaded glass mug, near barrel shape. Stiegel-type glass has bubbles and other imperfections throughout. Applied threading at rim; ribbed loop handle; engraved design on side is a bird with floral and foliate designs. Pontil mark on bottom has been smoothed around edges with grinding wheel.
Similar to #5, plate 35 in "American Glass" by George and Helen McKearin.
Provenance
Descent within the Nichols family of Lancaster Co. Family history states mug was always kept in a decorated dower chest, dated 1808.
Clear mold-blown Stiegel-type glass mug in cylindrical form. Bottom quarter has 14 fluted ribs that carry through to the bottom and converge on the pontil mark. Rim edged with gold. Side has multicolored fruit and floral paint decoration with a central orange oval cartouche outlined in gold with gold cursive lettering: "Remember me." Applied handle.
Provenance
Descent to Sarah Muench from family, likely her Aunt Alice Potter Fordney, an antiques dealer.
Pewter plate, part of the Warwick Congregation's (now known as the Brickerville United Lutheran Church) communion service.
Flat bottom, rounded booge and wide, flat rim with single reeded edge.
Underside struck with two oval marks: one has "Townsend and Compton" and the other reads "LONDON." Following are four small square marks in a row. The last one has the initials "T&C".
Provenance
The entire communion service remained in use over the years until the congregation decided in 1997 to find a safe place for this valuable communion set. Purchased by the Heritage Center of Lancaster County.
Platter of ironstone transferware with clear glaze. Rectangular with clipped corners, recessed bottom and moderately wide sides that extend outward. White body is devoid of decoration except for black transfer scene of a long bridge spanning a river, 5 people in foreground, town at right end of bridge and another in the distance on right bank. Underside has apparent impressed mark and transfer maker's mark at center: under a spread eagle with shield is a "sign" reading "COLUMBIA BRIDGE ON THE SUSQUEHANNA". Below it is "W.R.", indicating maker William Ridgway & Co. Sticker on bottom is: "$390" and "CLP". This river scene is a variation of the print done by William Henry Bartlett (see G98.12.21).
Shelton or Hanley, England
Provenance
Purchased in Adamstown Antiques Gallery for Heritage Center collection. Transferred from Heritage Center, December 2012.
Saltcellar of Stiegel-type clear glass, blown into a 3-piece mold. Body is an inverted pear form on a pedestal base. Upper body decorated with 25 slightly slanted vertical ribs. Bottom is slightly concave with pontil mark at center.
Provenance
Donor bought cellar for $70.00 at Horst Auction on 10-19-96, from the collection of Edward Miller.
Cup (A) and saucer (B), glazed soft-paste porcelain, Strawberry pattern. Handleless cup has straight flaring sides & rests on a small foot Paint decoration on white ground has 2 strawberries & a large green leaf on each side with smaller leaves, purple roses and brown squiggles. Interior has double stripe with berries and flowers. Rim painted rust.
Saucer (B)
Provenance
Collected by Harpo and Susan Marx during visits back East from CA. Donated to Heritage Center.
Strainer of glazed redware, but with a lighter brown color than most redware. Resting on three tapered 1-1/8 " long feet. The flat-bottomed dish has straight sides that flare out to a molded, high lip. Applied handles at sides. Large holes in bottom and three rows of smaller holes at sides.
Lead glaze overall with some streaks/runs of a darker brown.
Numerous chips on body overall; some large ones on underside and a large chip on the side; handle edges have suffered the most significant chipping loss. Glaze is crackled overall and has some staining, particularly on the interior. Feet are moderately worn.
Object ID
G.98.12.17
Place of Origin
Pennsylvania
Credit
Gift of Mrs. S.R. Slaymaker II, Heritage Center Collection
British quart-size pewter tankard, part of the Warwick Congregation's (now known as the Brickerville United Lutheran Church) communion service.
Straight-sided body with raised band below center; molded base. Hinged domed lid with erect thumbpiece and C-scroll handle. Applied to front of tankard is a cast decorated portrait medallion with the profiles of a man and a woman facing each other with a crown above their heads. Encircling the pair are the words: "LONG LIVE PRINCE AND PRINCESS OF ORANGE". The medallion commemorates the Prince of Orange (William III) and his wife Mary Stuart, daughter of Charles I of England. The couple ruled England as joint sovereigns 1689-1702.
Provenance
The entire communion service remained in use over the years until the congregation decided in 1997 to find a safe place for this valuable communion set. Purchased by the Heritage Center of Lancaster County.
Diameter of bottom is listed. Diameter of top is 4".
Condition
Good
Condition Date
2014-08-28
Condition Notes
Overall abrasions and staining. Cracked where handle is attached at top. Inside pitting. Some cracks on inside of lid's rim. Large dent above medallion.
Object ID
P.97.08.4
Place of Origin
England
Credit
Acquired through the generosity of the James Hale Steinman Foundation and Friends of the Heritage Center Museum, Heritage Center Collection
Copper teakettle with round body, gooseneck spout, very low domed lid w/ scrolled knob of sheet copper riveted onto lid with a hand-cut washer added under lid, suggesting repair or replacement. Curved handle hinges onto tapered plinth tab bases with two rivets each. Vertical dove-tailed side seam opposite single-seamed spout. Dove-tailed bottom.
Touchmark on top of handle is "R..REED." within a rectangular reserve with serrated ends.
Made by Robert Reed, working in Lancaster 1771-1779, then 1785-1795.
Provenance
Purchased by Heritage Center from Philip Bradley Antiques
Transferred from Heritage Center to LancasterHistory.org December, 2012.
Tax assessment lists Robert Reed 1786-1793.
Kauffman, Henry J. American Copper and Brass. New York: Bonanza, 1979.
Coppersmith info from Shelley Horvath Posten (dau. of Don Horvath), 2009
Copper dented and scratched overall, polish residue at handle hinges. Side handle break repaired with sheet iron patch secured to outside with two iron rivets. Knob appears to be a repair or a replacement.
Object ID
P.80.131
Place of Origin
Lancaster
Credit
Heritage Center Collection. Purchased through the generosity of the James Hale Steinman Foundation,
Copper tea kettle, classic form with gooseneck spout, high dome lid, marked strap handle hinged on "plinth w/ serifs" tab bases. Lid fitted with a crudely fashioned replaced iron or steel mushroom-shaped finial, bent to one side.
Vertical dove-tailed seam on side opposite spout, top seam running length of spout. Dove-tailed bottom.
Tarnished with numerous dents and scratches over body. Two very heavy dents at shoulder, opposite each other and one on bottom. Finial knob bent to one side. Two significant cracks on proper right side at shoulder and one on back.
Object ID
P.01.48.1
Place of Origin
Lancaster
Credit
Heritage Center Collection. Purchased through the generosity of the James Hale Steinman Foundation
