Chippendale high chest, mahogany, ornately carved, Phila-inspired Rococo style. Top section has scrolled broken arch pediment with central cartouche (attrib. to Phila carver, Martin Jugiez) and fully relief-carved vine tympanum, leading down to large central drawer w/ large carved shell & surrounding vines. Two small drawers flank center drawer, under which are 4 full-length, graduated drawers with original Chinoiserie brasses. Fluted corner columns on upper case; vine & leaf-carved corner columns on lower case.
Lower chest has top full-length drawer over 3 small drawers that mirror the 3 drawers at top. Again, the center drawer is fully carved. Below drawers is a fully vine-carved skirt w/ shaped bottom. Has 4 carved fully articulated cabriole legs w/ acanthus knees and ball and claw feet and original brass casters.
Original owner Matthias Slough was a colonel in the Rev. War, a superintendent of the Philadelphia to Lancaster Turnpike, a county coroner and treasurer, and tavernkeeper of the White Swan. Buried in St. James Episcopal Cemetery.
Made by unknown Lancaster Borough workshop.
Provenance
Original owner believed to be Mathias Slough, based on a 1934 letter from Ethel Torrington Davis to Mr.(James?) McCormick. Ms. Davis states her mother received story from her mother Mrs. Beatty. Mathias Slough married Mary Gibson and had three daughters. The oral tradition is that each daughter was given a high chest. These chests then descended in the family, one of which descended through the mother of Ethel T. Davis to James McCormick (in payment of an outstanding debt). This info researched by John J. Snyder.
From a July 1975 letter, donor George J. Finney recalls the highboy in the home of James McCormick of Hbg, his grandfather. After his death in 1917, it stayed with the house & his son Donald McCormick until his death in 1945. It was then put up for sale at auction of household good but failed to sell due to price not meeting expectations of executors. Donor learned of this, and in 1946 he offered to buy it for $2,500 and the estate accepted. Donor has owned highboy since 1946. Upon the death of the donor, it was bequeathed from his estate.
Multiple repairs (e.g. pieced out around drawers); refinished; some losses, most noticeable in some cartouche elements and leaves of rosettes. Finials missing the ball at mid section. Cosmetic conservation done by Cory Berrett April 1992.
Repairs made 12-2-09 by Winterthur conservator in consultation with curator Wendy Cooper (see conservation report in file). Major changes: broken off rosette leaf tips replaced; missing finial balls and top plates of plinths replaced.
Object ID
G.92.06
Notes
John Snyder states that mahogany is unusual for Lancaster Co. high-style pieces. Secondary woods are poplar and pine.
He notes six or fewer high chests of this Lancaster County Chippendale design are known to exist, and that of these six, "this piece is unquestionably the finest example." (Based on artistic evaluation, condition and provenance. Of these other chests, 2 are in private collections, one is in the State Department collection at Yale University, and the others' whereabouts are currently unknown.
Snyder says this high chest is closely related structurally to the famous Chippendale desk and bookcase acquired by the Winterthur Museum from the Withers family, living near Strasburg, Lancaster Co.
OBITUARY
May 14, 2009 FRANCES DAVIS HASSINGER EVERHART, of Lower Allen Township, Mechanicsburg, PA, passed away Thursday, May 14, 2009, in Bethany Village, Mechanicsburg. Frances was born March 1, 1916, in Harrisburg, PA, the daughter of CARL W. AND ETHEL TORRINGTON DAVIS. She was a 1938 graduate of Vassar Co...
Matthias Slough (1733-1812) was the tavernkeeper of the White Swan. The high chest was made at an unknown Lancaster Boro workshop, except for the carved cartouche of Philadelphia.
Place of Origin
Lancaster
Credit
Heritage Center Collection, bequest of George J. Finney Estate
Round copper vessel, shaped like a teakettle, but without a spout. A shaped strap handle is attached to each side of the opening at shoulder with riveted brackets. The handle widens near the middle, where the maker's mark is stamped: "P & B. SCHAUM"
Body is dovetailed to base, one dovetailed vertical seam, handle attached to flanges held in place by two rivets each. Pot insert is missing. Another insert (S.13) was purchased as a replacement.
Vessel has multiple dents, creating a general distortion overall. Surface is also tarnished and has drip stains running down the sides. The bottom is very worn and has numerous stains. Blueish-white stains on the inside. Polish residue on handle.
Object ID
P.77.61
Place of Origin
Lancaster
Related Item Notes
See broadside for Benjamin Schaum's hardware store, P.91.02
Credit
Heritage Center Collection. Purchased through the generosity of the James Hale Steinman Foundation
Small plate, used as a paten (communion plate). Circular, with single reed brim, marked on bottom with initials "I.CH." and Jacobs touch #169. Double incised lines near brim and single incised line within sunken bottom.
Dial scribe used originally for engraving circular lines (chapter rings) in brass dials. Converted for use with later white-painted dials (probably held a pen, according to clock expert Ed LaFond). Used by Jacob Gorgas (1728-1798). Maker unknown; most likely Lancaster Borough.
The tool arm is created from a foot-long bar of iron, rectangular in section. One end is enlarged and fitted with a vertical attachment made of cone-shaped iron surmounted by a turned wooden (walnut?) handle. This vertical attachment comes to a blunt point at the bottom. A shaped sleeve fits onto the horizontal iron bar and is fitted with a vertical hexagonal hole at one side. Two iron thumb screws are positioned at each side of sleeve.
Provenance
Owned by two brothers, Samuel K. and William L. Fraser, clockmakers who lived in Lincoln (just west of Ephrata) and grandsons of clockmaker William Fraser (1801-1877), then to early collector Earl T. Strickler (FNAWCC) who had it on display at the Columbia Clock and Watch Museum. Upon Strickler's sudden death circa 1974, it was sold by his widow, Mary Jane Strickler, to Edward F., Jr. and Virginia A. LaFond who owned it for "20 some" years. They then traded it to dealer Jamie Price for some clocks. Price had it on sale at the 2004 Philadelphia Antiques Show in mid-April where, as representative for the von Hess Foundation, Tom Cook, purchased it for this museum's collections.
Ed LaFond believes the Fraser family was related to the Gorgas family, thus they were in a position to inherit tools. Due to this, it was believed at first that both the machine and the scribe were from the Gorgas family. However, LaFond believes the Frasers were also related to the Shreiners.
Iron surface is pitted from corrosion, now stable. Turned wood handle is moderately worn and scarred with a broken off piece creating one flattened side. Wood is also checked (cracked) throughout neck.
Object ID
G.04.19.2
Notes
Stacy Wood researched origins and provenance of these tools and wrote an article in Vol. 96 #4 of LCHS Journal. Conversations with Virginia LaFond ( 5/19/04) and Ed LaFond (7/6/04).
Place of Origin
Lancaster
Usage
Gorgas, Jacob, 1728-1798
Credit
Gift of the Richard C. von Hess Foundation, Heritage Center Collection
Copper teakettle with round body, gooseneck spout, very low domed lid w/ scrolled knob of sheet copper riveted onto lid with a hand-cut washer added under lid, suggesting repair or replacement. Curved handle hinges onto tapered plinth tab bases with two rivets each. Vertical dove-tailed side seam opposite single-seamed spout. Dove-tailed bottom.
Touchmark on top of handle is "R..REED." within a rectangular reserve with serrated ends.
Made by Robert Reed, working in Lancaster 1771-1779, then 1785-1795.
Provenance
Purchased by Heritage Center from Philip Bradley Antiques
Transferred from Heritage Center to LancasterHistory.org December, 2012.
Tax assessment lists Robert Reed 1786-1793.
Kauffman, Henry J. American Copper and Brass. New York: Bonanza, 1979.
Coppersmith info from Shelley Horvath Posten (dau. of Don Horvath), 2009
Copper dented and scratched overall, polish residue at handle hinges. Side handle break repaired with sheet iron patch secured to outside with two iron rivets. Knob appears to be a repair or a replacement.
Object ID
P.80.131
Place of Origin
Lancaster
Credit
Heritage Center Collection. Purchased through the generosity of the James Hale Steinman Foundation,
