A night commode chair that has a four-slat back crest with a Windsor arrow design at the lower back of the chair. The high back chair has turned legs, which are braced by ring-turned box stretchers. The seat has a hole cut out at its center with a separate wood lid with a wrought-iron handle fixed by two screws. The underside of the seat no longer has rabbets to support its zinc or lead chamberpot.
Windsor-back rocking chair. The comb-shaped crest has gold painted trim and hand-painted floral, fruit and nut designs. The slab seat also has a hand-painted gilt outline. The two front legs have gilded turnings along with the front stretcher. The two back legs are canted into the rockers and are plain and round with a thin round plain stretcher. Dark wood. Six thin back rails.
Cut glass liquor decanter with spiral cut glass mushroom lid. Neck consists of 4 rings. The body of the decanter is a decagon shape (10 sides). 1.00" break/missing glass along the lip.
Year Range From
1714
Year Range To
1837
Storage Location
Wheatland, Lancaster, PA
Storage Room
Library
Storage Wall
Southwest Wall
Storage Cabinet
Table
Storage Shelf
Table Top
Object Name
Decanter
Material
Glass
Height (cm)
28.575
Height (ft)
0.9375
Height (in)
11.25
Depth (cm)
8.89
Depth (ft)
0.2916666667
Depth (in)
3.5
Circumference (ft)
37.465
Circumference (cm)
1.2291666667
Circumference (in)
14.75
Dimension Details
Measured height includes mushroom stopper. Height of body is 8.50". Measurements taken with tape measure.
Height: Measured bottom to top
Circumference: Measureed at widest point of the body
Leaded glass. 10 sided bottom. Finger-cut design toward bottom. 10 sided finger-cut shoulder. Neck has 3 beaded rings and flattish lip. Stopper is drop-shaped, pointed at top and is 7 faceted. Body is slightly flared to shoulder.
Signers of petition: Benjamin Miller, Moses Brinton, John Douglas, James Clemson, Thomas Douglas, Jon Douglas, Nathaniel Lightner, George Wright, John Hartt, Patrick Carigan, Jacob Downer, John Parks, Abraham Beare, John Whithill, Joseph Steer, William Hamilton, Johne Cooper, Jacob Lamon, Heneney Winger, Charles McClung, William Creighton, and 4 other names.
1 Item, 6 pieces
Access Conditions / Restrictions
Request at Reference Desk; photocopy made by staff member.
List of signers: John Johnson, Thomas Montgomery, George McCullugh, John Scot, Thomas Grubb, Samuel Scott, George Clengar, Joseph Frezar, Nethanell Brown, John Cahter, James Montgommory, Richard Stedman, Abraham Whiteshoe, James Ramsay, Samuel McConnell, Samuel Polk, Alexander Caldwell, Andrew McIntyer, William Stuart, John Lortes, William Porter, William Moore, Robert McCorkoll, Andrew Wankier, Danell McFarling, William McTier, Robert Reed, William Ritihey, James McSparon and 1 other name.
1 item, 1 piece
Access Conditions / Restrictions
Request at Reference Desk; photocopy made by staff member.
Lovebird mark, albeit is not completely struck, which is two facing birds with the initials LO and VE.
Inscription Type
Hallmark
Object Name
Plate, Food
Material
Pewter
Makers Mark
The plate was not made in London as one mark suggests. The love mark was used over a long period of time, ca. 1750-1840, and by a succession of Philadelphia pewterers.
All cotton block quilt of pieced blocks alternating with white blocks. Solid white blocks have quilted feather wreaths; alternate blocks have a geometric design of triangles and squares creating a Wild Goose Chase pattern with solid white and a green print with tiny black dots. The Wild Goose Chase pattern of green triangles on white ground is pieced into the shape of an "X".
Border consists of 3 narrow strips of green and white, with green in the center. Binding is green.
Quilting is hand done in white: Feather wreaths have parallel diagonals in center. Most of quilt also has parallel diagonals; pieced blocks have triangles and small-scale grid on center square patch.
Provenance
Unknown before donor. Amy (1891-1974) was daughter of John E. and Anna M. Cochran and married Dudley Brown, a realtor, in 1888.
Long, wooden handled tool with solid, flat metal end. Iron part is two peices - flat scrapper is 12.25'x 5.5' with the longest edge being sraight and the remaining edge being curved. The scrapper is rivioted to the handle holder which is a bent rod that
