Stiletto or awl of steel with wood handle and handmade protective tip.
Tool has a shaft of rounded steel coming to a sharp point. Mounted on a black-painted, turned wood handle, largest at end and tapering toward steel shaft where it terminates with two turned rings.
A chromed metal slide glides along tool shaft and is clamped in place with a knurled screw. Stamped on this slide is "PATD' APR-6-09" (or 00) and nearby is a symbol with the words "TRADE/ MARK."
Stiletto is fitted with a protective tip made of a bottle cork with crocheted cover and crocheted top ring.
Provenance
Collected by Lillian Hollings Kiker, born to Scottish Americans who lived in New Jersey. Born (1912) and lived in New Jersey, last of Egg Harbor, she was active with quilting, sewing, knitting & crocheting. Collection inherited by donor when her mother passed away.
Ribbon threader or bodkin is a blade of nickel-plated non-ferrous metal, in a torpedo shape, wide and rounded at one end and tapering to a point at other end. Two slots are cut in wide end for stringing ribbon that needs to be threaded through casings in waistbands, wristbands, etc.
Stamped inscriptions: On one side of tool is "RIBBON THEADER", "REGISTERED", "No. 3", AND "K.B.C.".
Provenance
Collected by Lillian Hollings Kiker, born to Scottish Americans who lived in New Jersey. Born (1912) and lived in New Jersey, last of Egg Harbor, she was active with quilting, sewing, knitting & crocheting. Collection inherited by donor when her mother passed away.
Stiletto or bodkin of turned bone, fitted in a conical basket-weave holder or sheath.
Stiletto (A) has ball-shaped head with hole in it, then narrowing to a neck with additional swells and narrowing until it tapers from midsection down to a sharp point.
Holder (B) is an elongated cone made with a brown reed-like material woven onto ribs like a basket. Handle is a twisted form of the same material, shaped in a double loop configuration.
It is assumed that this pair of otems were originally dwsigned for each other.
Provenance
Collected by Lillian Hollings Kiker, born to Scottish Americans who lived in New Jersey. Born (1912) and lived in New Jersey, last of Egg Harbor, she was active with quilting, sewing, knitting & crocheting. Collection inherited by donor when her mother passed away.
Bodkin of bone is a flattened needle with one rounded end and one end with a blunt point. Slot of 5/8" in length is cut into body near rounded end. This tool is used for threading ribbons, etc. through casings, fabric tubes or loops.
Provenance
Collected by Lillian Hollings Kiker, born to Scottish Americans who lived in New Jersey. Born (1912) and lived in New Jersey, last of Egg Harbor, she was active with quilting, sewing, knitting & crocheting. Collection inherited by donor when her mother passed away.
Bodkin of steel is a blunt needle used for threading ribbons or other fabric through casings, loops, etc.
Two thin pieces of tapered steel are laminated together through half their length at narrow end. Two pieces at wider end are separated, allowing a ribbon or other material to be fitted into "jaws" and clamped in place via a sliding mechanism fitted into slot that extends lenthwise toward jaws. Inside of jaw ends have 3 pairs of raised barbs or teeth that enable the jaws to hold material without slipping.
Stamped on one side at midsection is "THE DOT." This likely refers to the rounded sliding mechanism fitted in the slot.
Provenance
Collected by Lillian Hollings Kiker, born to Scottish Americans who lived in New Jersey. Born (1912) and lived in New Jersey, last of Egg Harbor, she was active with quilting, sewing, knitting & crocheting. Collection inherited by donor when her mother passed away.
Bodkin of steel is a blunt needle used for threading ribbons, tape or other fabric through casings, loops, etc.
Bodkin is two thin pieces of tapered steel that are laminated together through half their length at narrow end. Two pieces at wider end are separated, allowing a ribbon or other material to be fitted into "jaws" and clamped in place via a sliding mechanism fitted into slot that extends lenthwise toward jaws. Jaws are enabled to hold material without slipping via two raised beads stamped into one side and two matching holes on other side.
Stamped onto one side of tool at midsection is "PATD. MAR. 29. 92."
Provenance
Collected by Lillian Hollings Kiker, born to Scottish Americans who lived in New Jersey. Born (1912) and lived in New Jersey, last of Egg Harbor, she was active with quilting, sewing, knitting & crocheting. Collection inherited by donor when her mother passed away.
Black silk quilted woman's bonnet with large visor attached to small crown at back. Long skirting around nape of neck is not quilted. Bonnet is hand-quilted with a running stitch in two wide outer bands having a zig-zag pattern, and nine narrow inner bands. Cotton batting.
The lining at the back of interior is cotton print of squares in tan, white, blue and plum.
Two black tying strings are pinned to the bottom--one partial tie is sewn on.
Year Range From
1840
Year Range To
1870
Storage Location
LancasterHistory, Lancaster, PA
Storage Room
DAC
Storage Wall
Island 2
Storage Cabinet
Unit 13
Storage Shelf
Shelf 3
Storage Container
Box 0059
Object Name
Bonnet
Height (cm)
33.02
Height (ft)
1.0833333333
Height (in)
13
Width (cm)
25.4
Width (ft)
0.8333333333
Width (in)
10
Depth (cm)
20.32
Depth (ft)
0.6666666667
Depth (in)
8
Condition
Good
Condition Date
2001-05-18
Condition Notes
Small losses to silk on outside; larger loss on interior silk. Fraying in interior where black silk meets lining.
Oval tin box (A) with fitted, domed lid (B). Box has two raised bands on sides. Flat bottom of box is soldered to sides. Lid created by soldering a hammered, rounded oval top onto a 1/2" oval band. Interior of both A and B is tinned.
Used as a container for the miniature tea kettle G.00.03.1.
Lancaster County or region
Provenance
Ownership by donor's father, William A. Heitshu. Donor believes oval box was original container for teakettle.
Exterior surface has vestiges of an original finish, now oxidized with areas of corrosion. Abrasions over much of surface. Interior moderately rusted and corroded.
Object ID
G.00.03.2a-b
Credit
Gift of Martha Munster, Heritage Center Collection
Roughly fashioned polychromed softwood miniature trinket box of rectangular form. Domed lid hollowed out underneath and ends fitted with conforming caps. Wire hinges and wire loop at front with missing tin hasp. Corresponding wire loop for hasp on box front. Box sides constructed of rabbet joints secured by two wood pegs at front and two at back. Beveled bottom board attached with two pegs and extends beyond box sides. Top and four sides each have a floral motif of dark green, cream, ochre and red all on a tan ground. Glossy varnish overall except for bottom and interior. Indecipherable initials painted on bottom.
Probably Lancaster County
Provenance
Purchased by donor at Lancaster County sale. At least four other examples known. See example in collection #1973.003.2
Possible maker is Peter Brubacher (1816-1898), shoemaker and woodworker in Clay Township.
Trinket chest of dovetail construction, hinged lid, turned feet and polychrome decoration. Bottom secured with square nails. Keyhole at front; key missing. On a burnt orange ground are 5 large decals (4 of fruit and 1 of flowers) and one small decal at front center of spread eagle, shield and banner. Chest sides and top have centered line decoration of 3 concentric rectangles with hollow corners (black, ochre, white). Feet are black. Edge moldings of lid and base painted black with yellow-green double line decoration enclosing leafy scrolling vines. Interior and underside unfinished.
Inked # 00.43.1 on bottom. Two old stickers: "65603" on back and "65625" on bottom.
Attributed to Joseph Lehn (1798-1892). South of Clay, Elizabeth Township.
Provenance
Transferred from the James Buchanan Foundation where chest was "found in collection" with history/provenance.
Paint soiled and darkened. Large scar on left end of lid molding. Arc scored into top at right front of lid. Wear/abrasions overall, especially lid and base molding. Loose left front foot and paint loss of right back foot. Pristine interior. One hing screw missing.
Object ID
G.03.35.1
Place of Origin
Elizabeth Twp.
Credit
Gif ot James Buchanan Foundation, Heritage Center Collec
