Pewter basin, part of the Warwick Congregation's (now known as the Brickerville United Lutheran Church) communion service.
High, rounded sides flare out to a flattened rim with rolled edge. Booge appears to be unhammered. Barns struck his large circular mark with an eagle on the inside of bottom. The left portion of the eagle as well as the letters "BAR" on the bottom are discernible, as well as the "HE" above the eagle.
Probably made in Middletown or Wallingford, Connecticut.
Provenance
The entire communion service remained in use over the years until the congregation decided in 1997 to find a safe place for this valuable communion set. Purchased by the Heritage Center of Lancaster County.
Bonnet-top high chest, walnut w/ yellow pine and poplar secondary wood. Pegged frame and panel construction. A bonnet top broken arch pediment surrounds the tympanum with a central round, concave shell carving. Large orb finial on plinth centered within broken arch. Upper section has five graduated drawer sections consisting of three small drawers over two drawers over three long single drawers, all cock-beaded with bail brasses and escutcheons. Pulls not original; ghosting visible of original brasses. Quarter columns have wide chamfers with double fluting.
Upper chest rests on stepped-out lower chest having one long drawer flanked by two small ones and two more small drawers below these. Cutout apron at bottom. Very wide chamfered & fluted quarter columns. Cabriole legs with trifid feet and stocking detail.
Make is unknown.
Lancaster County, probably Churchtown area
Provenance
Chest originally belonged to the Old family, prominent ironmasters of Lancaster and Berks Co. It may have been owned first by James Old (1730-1809) or one of his children. The chest later passed from Miss Harriet Old to the Hopkins family at Conowingo Furnace, Drumore Twp., Lancaster County.
Overall abrasions, scars and small losses of wood. 4" crack in pediment, left of finial. Significant grouping of gashes 4"x 3" spanning 2nd & 3rd level drawers, at left. Entire front of top chest detaching from sides. Piece at top of left stile, under cornice, is broken & poorly repaired. Deep horizontal 7" crack on left side of base unit. Vertical crack entire length of right side of top. 1 12" long gouge on stile of right front leg. White flecks on right front leg. Brasses tarnished with some rust.
Object ID
P.78.76
Notes
Exhibit label information:
John J. Snyder, Jr. suggests many points of similarity with a Q.A Phila. highboy owned by diarist Christopher Marshall who brought chest along with him when he moved to Lancaster Co. "on the eve of the Revolutionary War." (Winterthur collections). This chest may have inspired the design of the Old chest.
Wide fluted chamfered corners similar to a Q.A. secretary (G.03.1.1) formerly owned by the Jenkins family of Churchtown. Similar to a case of Geo. Hoff clock w/ brass face, and similar to casework by some Phila. and Maryland cabinetmakers.
Snyder notes that cockbeaded edges on drawers suggest a later date than expected (c. 1770-1790). This type in Phila. was being made c. 1740-1760.
Place of Origin
Lancaster County
Usage
Old family
Credit
Gift of James Hale Steinman Foundation, Heritage Center Collection
Pewter flagon, one of a pair, made by Heyne and presented to the Warwick Congregation (now the Brickerville United Lutheran Church) for use as part of a communion service. Cylindrical tankard form of top half joins a bottom section that begins to swell until it flares out dramatically at bottom. Has three applied cherub's head feet bordered with wrigglework. Applied spout. Heyne then innovated by departing from German forms by using three English features: an applied hollow handle, a double-domed lid and an erect chairback thumbpiece.
At midline below three raised bands is an engraved two-lobed crown above large initials "MH" filled with wrigglework. Underside is stamped with Heyne's mark, a crown over the initials "ICH", and "LANCASTER" below. Undated, although the other flagon of this pair is marked "1776" on bottom.
Johann Christoph Heyne was working on West King Street in Lancaster Borough, 1752-1781.
Provenance
Possibly commissioned from Heyne by William and Mary Huber of this congregation and presented to the church with their initials.
Pewter flagon, one of a pair, made by Heyne and presented to the Warwick Congregation (now known as the Brickerville United Lutheran Church) for use as part of a communion service. Cylindrical tankard form of top half joins a bottom section that begins to swell until it flares out dramatically at bottom. Has three applied cherub's head feet bordered with wrigglework. Applied spout. Heyne then innovated by departing from German practice by using three English features: an applied hollow handle, a double-domed lid and an erect chairback thumbpiece.
At midline below three raised bands is engraved a two-lobed crown above large Roman initials "WH" filled with wrigglework. The underside of flagon is stamped with a crown over the initials "ICH". Below this is stamped "LANCASTER" and to the right is engraved "1766".
Johann Christoph Heyne was working on West King Street in Lancaster Borough, 1752-1781.
Provenance
Pair of flagons possibly commissioned from Heyne by William and Mary Huber of this congregation and presented to the church with their initials. Remained in use over the years until the congregation decided in 1997 to find a safe place for this valuable communion set.
Note: Another pair of flagons was ordered from Heyne in 1766 by Trinity Lutheran Church. Heyne also used the English round, hollow handle on those. However, that pair differs from ours, and all other later Heyne flagons, in that he incorporated the English style double domed lid and erect thumbpiece.
Overall wear: abrasions, nicks and dents. Dents on lid top. Large scratch at lower right of "H" Dark stains and small pinhole in thumbpiece. Interior has several small areas of deep scratches.
Object ID
P.97.08.2
Place of Origin
Lancaster
Credit
Acquired through the generosity of the James Hale Steinman Foundation and Friends of the Heritage Center Museum, Heritage Center Collection
Small free-blown wine or dram glass, Stiegel type. Conical form. Low profile knop on stem. Round pedestal base with concentric ring created by folded foot. Pontil mark on bottom.
Provenance
Purchased by donor Hampton C. Randolph, Sr., for $65 at the sale of the Henry E. Balmer estate, Lancaster, PA on April 20, 1996, then donated to the Heritage Center of Lancaster County.
Round copper vessel, shaped like a teakettle, but without a spout. A shaped strap handle is attached to each side of the opening at shoulder with riveted brackets. The handle widens near the middle, where the maker's mark is stamped: "P & B. SCHAUM"
Body is dovetailed to base, one dovetailed vertical seam, handle attached to flanges held in place by two rivets each. Pot insert is missing. Another insert (S.13) was purchased as a replacement.
Vessel has multiple dents, creating a general distortion overall. Surface is also tarnished and has drip stains running down the sides. The bottom is very worn and has numerous stains. Blueish-white stains on the inside. Polish residue on handle.
Object ID
P.77.61
Place of Origin
Lancaster
Related Item Notes
See broadside for Benjamin Schaum's hardware store, P.91.02
Credit
Heritage Center Collection. Purchased through the generosity of the James Hale Steinman Foundation
Clock wheel cutting machine used by Lancaster clockmaker Martin Shreiner, Sr. Made of steel and brass with turned wood handle knob on crank. Main frame of tool is steel resting on four rounded, downward-curving legs with coin-shaped feet. Many moving parts, arms and cranks/screws, including the swiveling cutting yoke/frame at top (cutter blade with arbor/spindle missing) and the shaped index arm that "reads" the holes on the 13"-diameter brass wheel furnished with concentric circles of surface holes.
The LaFonds call this a very sophisticated machine, incorporating Swiss, German and English ideas/influences. This indicates to them that the machine was made in America, very likely by Shreiner himself. It was imperative for clockmakers to own this tool to practice their trade. Few survive. This machine was first described in the early book or article (LCHS Bulletin) printed in 1917(or 1919) & 1939 by D. McGee who wrote about Lancaster clockmaking. Ed believes this machine to be "the finest American engine in existence" and that it very well may have been made by Shreiner, probably in the 1790s. The cutter blade was used to cut the teeth on the large brass wheels that turn the pinions. There would have been either a slitting cutter or a form cutter used. Carter Harris says form cutters were used by the 1790s.
Attributed to Martin Shreiner (1769-1866).
An 8x10 B&W photo is in picture file under "clocks." Also slide is in slide collection, #14-3-11.
Lancaster Borough, most likely
Provenance
Owned by two brothers, Samuel K. and William L. Fraser, clockmakers who lived in Lincoln (just west of Ephrata) and grandsons of clockmaker William Fraser (1801-1877), then to early collector Earl T. Strickler (FNAWCC) who had it on display at the Columbia Clock and Watch Museum. Upon Strickler's sudden death circa 1974, it was sold by his widow, Mary Jane Strickler, to Edward F., Jr. and Virginia A. LaFond who removed rust and kept it on a window sill. They then traded it to dealer Jamie Price for some clocks. Price had it on sale at the 2004 Philadelphia Antiques Show in mid-April where, as representative for the von Hess Foundation, Tom Cook, purchased it for this museum's collections.
Ed LaFond believes the Fraser family was related to the Gorgas family, thus they were in a position to inherit tools. Due to this, it was believed at first that both the machine and the scribe were from the Gorgas family. However, LaFond believes the Frasers were also related to the Shreiners. Stacy Wood claims this machine was one of Martin Shreiner's tools (Vol. 96, LCHS Journal).
Pitting on steel surfaces, slight discoloration on brass parts, signs of wear overall.
Object ID
G.04.19.1
Notes
Information from: Clockmakers of Lanc. Co., Wood/Kramer, 1977, p. 142. 225 Years of Timepieces (Catalog of 1st Annual Exh. of NAWCCM, 1979), p. 63. Stacy Wood researched origins and provenance of these tools and wrote article in Vol. 96 #4 of LCHS Journal. Conversations with Virginia LaFond ( 5/19/04), Ed LaFond (7/6/04) and Carter Harris (7/7/04).
Place of Origin
Lancaster
Usage
Shreiner, Martin
Credit
Gift of the Richard C. von Hess Foundation, Heritage Center Collection
Clear, free-blown leaded glass mug, near barrel shape. Stiegel-type glass has bubbles and other imperfections throughout. Applied threading at rim; ribbed loop handle; engraved design on side is a bird with floral and foliate designs. Pontil mark on bottom has been smoothed around edges with grinding wheel.
Similar to #5, plate 35 in "American Glass" by George and Helen McKearin.
Provenance
Descent within the Nichols family of Lancaster Co. Family history states mug was always kept in a decorated dower chest, dated 1808.
Clear mold-blown Stiegel-type glass mug in cylindrical form. Bottom quarter has 14 fluted ribs that carry through to the bottom and converge on the pontil mark. Rim edged with gold. Side has multicolored fruit and floral paint decoration with a central orange oval cartouche outlined in gold with gold cursive lettering: "Remember me." Applied handle.
Provenance
Descent to Sarah Muench from family, likely her Aunt Alice Potter Fordney, an antiques dealer.
Pewter plate, part of the Warwick Congregation's (now known as the Brickerville United Lutheran Church) communion service.
Flat bottom, rounded booge and wide, flat rim with single reeded edge.
Underside struck with two oval marks: one has "Townsend and Compton" and the other reads "LONDON." Following are four small square marks in a row. The last one has the initials "T&C".
Provenance
The entire communion service remained in use over the years until the congregation decided in 1997 to find a safe place for this valuable communion set. Purchased by the Heritage Center of Lancaster County.