Silver beaker or handless cup; flared form with double lip.
Engraved "J C M" in script lettering on the side; engraved "C. MAYER" in block letters on the underside of the base. The base also has maker's mark in the center, "W H" in a small rectangle with a scrolled serif on the bottom of the left stroke of the "H".
According to John J. Snyder, Jr, "C. Mayer" is Christopher Bartholomew Mayer (c. 1756 - Aug. 11,1815 and son of George Ludwig Mayer), a wealthy Lancaster hardware merchant who lived in the elegant stone house built by his father-in-law, George Burkhard (c. 1721-1783), a prominent Lancaster joiner, in 1764, at the NW corner of Orange and Duke Sts. Christopher B. Mayer married Jan. 2, 1783, to Susannah Burkhard(t) (1761-1848), later producing 8 children. Mayer was prominent in politics, and twice represented Lancaster in the state Senate."
Snyder continues: "The "JCM" of the monogram may be identified, tentatively, as Juliana (Julia) Catherine Mayer (1806-1857), later the wife of George May Keim of Reading." They married in 1827. Keim was a US Congressman, representing the 9th District in the U.S. House of Representatives (1838-1843) He also served as Mayor of Reading in 1852. They are buried in the Charles Evans Cemetery in Reading. Juliana (Julia) was apparently a daughter of Christopher & Susannah Mayer.
At time of acquisition,this beaker was believed to be the only piece of Wm. Haverstick hollow ware then known. With its history of early ownership by a very prominent Lancaster family, it adds a valuable historical dimension.
Provenance
Purchase from dealer Harry Hartman. Previous history unknown.
Birth certificate done in German for "Anna Schenkin" (Schenk), born in "Connostoge Taunschip Langster County", November 20, 1783. Hand drawn, colored and lettered on laid paper with iron gall ink. No baptism indicates a Mennonite family.
The text is enclosed within a heart, surrounded by various vining flowers and four birds, two above and two below. The design conforms with artist's normal pattern of having the vines emanate from a hole at the top center of the heart. This artist made fraktur for mostly Lancaster County Mennonite families. He was almost certainly a schoolmaster. There are about 15 of his fraktur that are documented.
"Johannes Schopf/Schopp Artist" (active c. 1774-1800)
Note written on frame's dust cover by Smith states this fraktur was exhibited in two shows: Allentown Folk Art Show (Nov. 1974) and William Penn Memorial Museum, F/A Show (Jan. 1975).
Slide #27-2-4 in Archives West.
Provenance
Purchased by Richard Flanders Smith at a public sale along Route 222, north of Willow Street. Given to the Lancaster County Historical Society with the understanding that it would become part of the Heritage Center collection with the establishment of that institution.
Foxing or brown spotting over much of surface. Some tears along the edges. Moisture or adhesive stain at bottom center.
A condition report and treatment proposal was done by the Conservation Center for Art and Historic Artifacts in Philadelphia in 1986. Matted and framed by conservator Brian Howard of Carlisle in 1996.
Object ID
G.77.50.11
Place of Origin
Conestoga Twp.
Credit
Gift of Mr. & Mrs. Richard Flanders Smith, Heritage Center Collection
Round copper vessel, shaped like a teakettle, but without a spout. A shaped strap handle is attached to each side of the opening at shoulder with riveted brackets. The handle widens near the middle, where the maker's mark is stamped: "P & B. SCHAUM"
Body is dovetailed to base, one dovetailed vertical seam, handle attached to flanges held in place by two rivets each. Pot insert is missing. Another insert (S.13) was purchased as a replacement.
Vessel has multiple dents, creating a general distortion overall. Surface is also tarnished and has drip stains running down the sides. The bottom is very worn and has numerous stains. Blueish-white stains on the inside. Polish residue on handle.
Object ID
P.77.61
Place of Origin
Lancaster
Related Item Notes
See broadside for Benjamin Schaum's hardware store, P.91.02
Credit
Heritage Center Collection. Purchased through the generosity of the James Hale Steinman Foundation
Clock wheel cutting machine used by Lancaster clockmaker Martin Shreiner, Sr. Made of steel and brass with turned wood handle knob on crank. Main frame of tool is steel resting on four rounded, downward-curving legs with coin-shaped feet. Many moving parts, arms and cranks/screws, including the swiveling cutting yoke/frame at top (cutter blade with arbor/spindle missing) and the shaped index arm that "reads" the holes on the 13"-diameter brass wheel furnished with concentric circles of surface holes.
The LaFonds call this a very sophisticated machine, incorporating Swiss, German and English ideas/influences. This indicates to them that the machine was made in America, very likely by Shreiner himself. It was imperative for clockmakers to own this tool to practice their trade. Few survive. This machine was first described in the early book or article (LCHS Bulletin) printed in 1917(or 1919) & 1939 by D. McGee who wrote about Lancaster clockmaking. Ed believes this machine to be "the finest American engine in existence" and that it very well may have been made by Shreiner, probably in the 1790s. The cutter blade was used to cut the teeth on the large brass wheels that turn the pinions. There would have been either a slitting cutter or a form cutter used. Carter Harris says form cutters were used by the 1790s.
Attributed to Martin Shreiner (1769-1866).
An 8x10 B&W photo is in picture file under "clocks." Also slide is in slide collection, #14-3-11.
Lancaster Borough, most likely
Provenance
Owned by two brothers, Samuel K. and William L. Fraser, clockmakers who lived in Lincoln (just west of Ephrata) and grandsons of clockmaker William Fraser (1801-1877), then to early collector Earl T. Strickler (FNAWCC) who had it on display at the Columbia Clock and Watch Museum. Upon Strickler's sudden death circa 1974, it was sold by his widow, Mary Jane Strickler, to Edward F., Jr. and Virginia A. LaFond who removed rust and kept it on a window sill. They then traded it to dealer Jamie Price for some clocks. Price had it on sale at the 2004 Philadelphia Antiques Show in mid-April where, as representative for the von Hess Foundation, Tom Cook, purchased it for this museum's collections.
Ed LaFond believes the Fraser family was related to the Gorgas family, thus they were in a position to inherit tools. Due to this, it was believed at first that both the machine and the scribe were from the Gorgas family. However, LaFond believes the Frasers were also related to the Shreiners. Stacy Wood claims this machine was one of Martin Shreiner's tools (Vol. 96, LCHS Journal).
Pitting on steel surfaces, slight discoloration on brass parts, signs of wear overall.
Object ID
G.04.19.1
Notes
Information from: Clockmakers of Lanc. Co., Wood/Kramer, 1977, p. 142. 225 Years of Timepieces (Catalog of 1st Annual Exh. of NAWCCM, 1979), p. 63. Stacy Wood researched origins and provenance of these tools and wrote article in Vol. 96 #4 of LCHS Journal. Conversations with Virginia LaFond ( 5/19/04), Ed LaFond (7/6/04) and Carter Harris (7/7/04).
Place of Origin
Lancaster
Usage
Shreiner, Martin
Credit
Gift of the Richard C. von Hess Foundation, Heritage Center Collection
Dial scribe used originally for engraving circular lines (chapter rings) in brass dials. Converted for use with later white-painted dials (probably held a pen, according to clock expert Ed LaFond). Used by Jacob Gorgas (1728-1798). Maker unknown; most likely Lancaster Borough.
The tool arm is created from a foot-long bar of iron, rectangular in section. One end is enlarged and fitted with a vertical attachment made of cone-shaped iron surmounted by a turned wooden (walnut?) handle. This vertical attachment comes to a blunt point at the bottom. A shaped sleeve fits onto the horizontal iron bar and is fitted with a vertical hexagonal hole at one side. Two iron thumb screws are positioned at each side of sleeve.
Provenance
Owned by two brothers, Samuel K. and William L. Fraser, clockmakers who lived in Lincoln (just west of Ephrata) and grandsons of clockmaker William Fraser (1801-1877), then to early collector Earl T. Strickler (FNAWCC) who had it on display at the Columbia Clock and Watch Museum. Upon Strickler's sudden death circa 1974, it was sold by his widow, Mary Jane Strickler, to Edward F., Jr. and Virginia A. LaFond who owned it for "20 some" years. They then traded it to dealer Jamie Price for some clocks. Price had it on sale at the 2004 Philadelphia Antiques Show in mid-April where, as representative for the von Hess Foundation, Tom Cook, purchased it for this museum's collections.
Ed LaFond believes the Fraser family was related to the Gorgas family, thus they were in a position to inherit tools. Due to this, it was believed at first that both the machine and the scribe were from the Gorgas family. However, LaFond believes the Frasers were also related to the Shreiners.
Iron surface is pitted from corrosion, now stable. Turned wood handle is moderately worn and scarred with a broken off piece creating one flattened side. Wood is also checked (cracked) throughout neck.
Object ID
G.04.19.2
Notes
Stacy Wood researched origins and provenance of these tools and wrote an article in Vol. 96 #4 of LCHS Journal. Conversations with Virginia LaFond ( 5/19/04) and Ed LaFond (7/6/04).
Place of Origin
Lancaster
Usage
Gorgas, Jacob, 1728-1798
Credit
Gift of the Richard C. von Hess Foundation, Heritage Center Collection