Two thin sheets of torpedo-shaped ivory-colored bakelite/celluloid are joined by a small block of the same material at their centers. The ends of both sides curve towards each other, closing and touching at their end points. Shuttle is designed for loading with thread by wrapping thread around center block. One of pointed ends has a thin pointed tip that protrudes 3/8" in length.
Stamped "BUCILLA/ REG.U.S.PAT.OFF." on both sides of shuttle. Bucilla is a sewing supply company formed in 1867 with headquarters in Hazelton, PA. The internet lists many examples made of plated brass, bone, horn, etc.
Provenance
Collected by Lillian Hollings Kiker, born to Scottish Americans who lived in New Jersey. Born (1912) and lived in New Jersey, last of Egg Harbor, she was active with quilting, sewing, knitting & crocheting. Collection inherited by donor when her mother passed away.
Stiletto or bodkin of turned bone, fitted in a conical basket-weave holder or sheath.
Stiletto (A) has ball-shaped head with hole in it, then narrowing to a neck with additional swells and narrowing until it tapers from midsection down to a sharp point.
Holder (B) is an elongated cone made with a brown reed-like material woven onto ribs like a basket. Handle is a twisted form of the same material, shaped in a double loop configuration.
It is assumed that this pair of otems were originally dwsigned for each other.
Provenance
Collected by Lillian Hollings Kiker, born to Scottish Americans who lived in New Jersey. Born (1912) and lived in New Jersey, last of Egg Harbor, she was active with quilting, sewing, knitting & crocheting. Collection inherited by donor when her mother passed away.
Tatting hook of bone handle shaft of iron hook set into smaller end.
Tool has handle of elongated teardrop shape, somewhat flattened in cross-section. Wire-like shaft with rounded hook on tip is set into handle. Shaft is thicker than hooked end.
Provenance
Collected by Lillian Hollings Kiker, born to Scottish Americans who lived in New Jersey. Born (1912) and lived in New Jersey, last of Egg Harbor, she was active with quilting, sewing, knitting & crocheting. Collection inherited by donor when her mother passed away.
Needle case of turned hardwood (maple?). Cylindrical body was turned in two pieces and strong chamfers at each blunt ends. Center band of glossy black with three scored lines at midpoint. Ends also painted black with a score line on each. Additional daubs of black paint on unpainted body.
Cylinder is hollow for holding needles. One third of body pulls off like a cap, sliding off a male extension of the 2/3 section. No contents.
Provenance
Collected by Lillian Hollings Kiker, born to Scottish Americans who lived in New Jersey. Born (1912) and lived in New Jersey, last of Egg Harbor, she was active with quilting, sewing, knitting & crocheting. Collection inherited by donor when her mother passed away.
Needle case of cast silver is a square-bodied long container that tapers from one end to the other. Made of 2 pieces, the thickest end is the cap that fits on a male extension of the main body. The length of each side of case is constructed of identical cast pieces of silver with a soldered seam still visible.
Decorated with low-relief roses on cap; grapevine and football shape are on main body. Small panels on narrower sides have a slogan in German: "ZUM / ANDENKEN / KEINE ROSEN / OHNE DORNEN" which translates as a warning to not prick one's self with the needle. Literally, it states "Remember (there are) no roses without thorns."
Possibly Germany
Provenance
Collected by Lillian Hollings Kiker, born to Scottish Americans who lived in New Jersey. Born (1912) and lived in New Jersey, last of Egg Harbor, she was active with quilting, sewing, knitting & crocheting. Collection inherited by donor when her mother passed away.
Needle case with needle threader, two pieces, a long metal tubular case of bronzed metal. Most of the object is the hollow tubular handle, 2.75" in length, with one rounded end and male-shaped "cap" fitting into opposite end. Handle has bery fine ribs running lengthwise on exterior. Cap end is very short with a smooth exterior. It has one rounded end while opposite end - that fits into handle - is fitted with a fine wire loop used to thread needles. The loop is mounted into red-painted wood which is in turn set into cap's hollow end. To use tool, cap is removed, reversed end for end, and reinserted into hollow handle.
On side of cap is stamped "GERMANY."
Provenance
Collected by Lillian Hollings Kiker, born to Scottish Americans who lived in New Jersey. Born (1912) and lived in New Jersey, last of Egg Harbor, she was active with quilting, sewing, knitting & crocheting. Collection inherited by donor when her mother passed away.
Bodkin of bone is a flattened needle with one rounded end and one end with a blunt point. Slot of 5/8" in length is cut into body near rounded end. This tool is used for threading ribbons, etc. through casings, fabric tubes or loops.
Provenance
Collected by Lillian Hollings Kiker, born to Scottish Americans who lived in New Jersey. Born (1912) and lived in New Jersey, last of Egg Harbor, she was active with quilting, sewing, knitting & crocheting. Collection inherited by donor when her mother passed away.
Bodkin of steel is a blunt needle used for threading ribbons or other fabric through casings, loops, etc.
Two thin pieces of tapered steel are laminated together through half their length at narrow end. Two pieces at wider end are separated, allowing a ribbon or other material to be fitted into "jaws" and clamped in place via a sliding mechanism fitted into slot that extends lenthwise toward jaws. Inside of jaw ends have 3 pairs of raised barbs or teeth that enable the jaws to hold material without slipping.
Stamped on one side at midsection is "THE DOT." This likely refers to the rounded sliding mechanism fitted in the slot.
Provenance
Collected by Lillian Hollings Kiker, born to Scottish Americans who lived in New Jersey. Born (1912) and lived in New Jersey, last of Egg Harbor, she was active with quilting, sewing, knitting & crocheting. Collection inherited by donor when her mother passed away.
Bodkin of steel is a blunt needle used for threading ribbons, tape or other fabric through casings, loops, etc.
Bodkin is two thin pieces of tapered steel that are laminated together through half their length at narrow end. Two pieces at wider end are separated, allowing a ribbon or other material to be fitted into "jaws" and clamped in place via a sliding mechanism fitted into slot that extends lenthwise toward jaws. Jaws are enabled to hold material without slipping via two raised beads stamped into one side and two matching holes on other side.
Stamped onto one side of tool at midsection is "PATD. MAR. 29. 92."
Provenance
Collected by Lillian Hollings Kiker, born to Scottish Americans who lived in New Jersey. Born (1912) and lived in New Jersey, last of Egg Harbor, she was active with quilting, sewing, knitting & crocheting. Collection inherited by donor when her mother passed away.
Set of tatting tools, nickel silver plated steel, has four pieces. Each piece has in common the shaped and decorated portions, the handles of the three tools and the needle case body. This feature is a flattened octagonal shape in cross-section, with successive divots ground out with a round grinding wheel. Handles and case all taper along their length.
A. Needle case is 2.75" long and .375" wide. At the heavier end of case is a fitted cap that slides onto a smaller male extension protruding from main body. Seam visible along sides where both halves of case have been joined.
B. Hook on handle is 4" long and .25" wide. Tapers from handle end down to where shaft is attached. Shaft has ball-and-ring at handle, a slight swell along length and a minute hook at tip.
C. Awl is 3.625" long and .25" wide. Same handle as above. Shaft is similar in shape except heavier and shorter and has a sharp tip.
D. Threading tool(?) is 3" long and .5" long. Same handle as above. Shaft is shorter and has a large open loop in a teardrop shape.
Provenance
Collected by Lillian Hollings Kiker, born to Scottish Americans who lived in New Jersey. Born (1912) and lived in New Jersey, last of Egg Harbor, she was active with quilting, sewing, knitting & crocheting. Collection inherited by donor when her mother passed away.
Set of 3 steel tatting hooks, no handles. All are similar with round, tapering shanks that terminate in tiny hooks of differing sizes. Theaded at other end for fitting into a handle, now missing. Double ring turnings adjacent to threads.
Provenance
Collected by Lillian Hollings Kiker, born to Scottish Americans who lived in New Jersey. Born (1912) and lived in New Jersey, last of Egg Harbor, she was active with quilting, sewing, knitting & crocheting. Collection inherited by donor when her mother passed away.
Dovetail construction, wire nails used on interior. Inside is a till and a sliding drawer; shoe molding on all bottom inside corners. Below mid-line molding are two thumbnail-molded, side-by-side drawers with nailed joints and fitted with locks, escutcheons and bail-type brasses in batwing style.
Lid is two joined boards with ends tenoned into end boards and pegged, cutting board fashion. Edge molding is intrinsic, not applied, except for light molding attached to underside to create lip. Lid has strap hinges with fishtail terminals and is fitted with a lock and brass batwing-type escutcheon. Medallion is relief-carved into center of lid top with "18 SF 40." The meaning of this 1840 date is a mystery.
Molding at the base of chest; four ogee bracket feet.
Provenance
Provenance: One of twelve pieces of furniture transferred to this museum from the Lancaster County Historical Society. These pieces were part of the estate of Sarah Ann Stauffer (1913-1996) whose property, Lime Kiln Farm, was bequeathed to LCHS upon her death in 1996.
Clarke Hess had suggested the chest may have been made for Sarah Ann Frantz and the 1840 date may be her birth year. Often, he says, pieces of furniture were made for a child or heir at the time of the settling of an estate.
Research: Sarah Ann Frantz (sister of Sarah A. Stauffer's gr-grandfather Henry L. Frantz) was born 1835, Grandfather Samuel O. Frantz was born 1861, so this theory is incorrect. (The East Hempfield Twp. farm of Sarah A. Frantz is located on both the 1875 and 1899 Atlases, SW of Rohrerstown and S.O. Frantz is shown nearby on 1899 Atlas.)
Top has large crack through center and many dents, scratches and score marks. Loss at right end of mid--line molding of front. Multiple cracks in sides. Repairs done to feet. Refinished with heavy stain and varnish on lid and all interior surfaces. Original finish on front is heavily alligatored; finish on sides is crackled. Interior surfaces have had paper and textiles adhere to wet varnish. Sliding drawer has crack in bottom.
Object ID
G.99.41.9
Place of Origin
Lancaster
Credit
Transferred from Lancaster Co. Historical Soc., Heritage Center Collection
Stoltzfus family record on wove paper mounted in a thin, molded modern frame of tiger maple. Hand done family record of Lancaster Amish family attributed to David C. Hoke (active c. 1909-1935). Bold and colorful title is "Family Record" done with wide lettering of red and black with metallic gold highlights accompanied by green-leafed scrolling vines. Title continues on 2nd line with "...of Henry U. and Annie M. Stoltzfus." followed by the father's birth date & death date, then birth date of mother. Her death date is added later on same line with pencil. All lettering is black except for large, ornately illuminated upper case letters.
"Children" is the colorful bold heading for the remaining 3//4 of page listing 10 children with birth dates. The death date for 2-yr-old Levi is also recorded. Title has black and white letters, some red as well as metallic gold highlights. Surrounded by the same leafy scrolling vines and three upside down stalks of wheat at each side.
Remaining side borders have a vertical undulating vine with green leaves and blue clusters of grapes. Bottom is filled with a large cluster of three stalks of wheat.
Very minor stain spots, esp. at corners. Strongly creased horizontal fold line across center.
Object ID
P.96.01.1
Notes
Compare with large Esbenshade family record P.99.16.1. Hoke made Bible entries, bookplates and many large family registers in northern Lancaster County and southern Lebanon County. Large, ornate family registers made for the Amish seem to be a specialty of Hoke. He signed and dated much of his work, oftern including his home location of Quentin and later Lititz.
See file for:
1) Stoltzfus genealogy from "Fisher Family History."
2) Information sheet on David C. Hoke by Russ and Corinne Earnest "Papers for Birth Dayes."
Place of Origin
Lancaster County
Credit
Gift of the James Hale Steinman Foundation, Heritage Center Coll
Sample of penmanship on lined paper (7 3/4 x 12 1/2) pasted onto off-white mat board. Death entry at top for John Bear, enclosed in decorative border. Below is record of marriage for Edwin Keen and Edith Leaman, also within a large decorative border.
Assumed that mounting was performed by donor who used these materials for demonstrating his own penwork at public events.
Long vertical tears, top to bottom. Shorter additional tear extends down from top, 2 1/4" from left corner. Soiling on top and bottom; torn and ragged edges.
Sample of penmanship on lined paper (7 3/4 x 12 1/2) and business card (4 1/4 x 2 1/2), both dry mounted on mat board.
Sample mounted above reads: "Births" in red ink followed by two entries for Markley family enclosed in decorative borders. Next is "Children" followed by two entries. Toward bottom is a third heading "Deaths" followed by four entries, with the last entry enclosed in a decorative border.
At bottom of mounting board is rectangular business card of heavy-weight tan paper. Printing in black reads, "Jos. H McGlaughlin/ Ornamental Penman./ Family Records, Birth, Baptismal,/ Marriage and Lodge Certificates,/ Neatly and Artistically Written./ Family and Memorial Charts Made to Order./ LEOLA, Lanc. Co., Pa." (See unmounted example G.96.03.02).
Assumed that mounting was performed by donor who used these materials for demonstrating his own penwork at public events.
Several long tears; rips and ragged edges, esp. top; buckling and wrinkling overall due to glue mounting.
Tankard, lidded barrel form. Copper body with brass handle, shell thumb piece and four bands encircling body. Interior is tinned. Engraved on opposite side from handle, "COMPLIMENTS/ OF/ JOHN G. SCHAUM/ TO/ FRANK J. RIEKER." One of a pair with P00.42.2.
Believed to be a presentation piece given by Schaum in appreciation for all the work he was given in Rieker's brewery. Schaum did copper, tin and sheet iron work and was the son and one-time partner of plumber/ coppersmith John P. Schaum.
Provenance
Collection of J. Harlan Miller sold at Conestoga Auction Oct. 21, 2000.
Tankard, lidded barrel form. Copper body with brass handle, shell thumb piece and four bands encircling body. Interior is tinned. Engraved on opposite side from handle, "COMPLIMENTS/ OF/ JOHN G. SCHAUM/ TO/ JOSEPH HAEFNER." One of a pair with P00.42.3.
Believed to be a presentation piece given by Schaum in appreciation for all the work he was given in Haefner's brewery. Schaum did copper, tin and sheet iron work and was the son and one-time partner of plumber/ coppersmith John P. Schaum.
Provenance
Collection of J. Harlan Miller sold at Conestoga Auction Oct. 21, 2000. Transferred from Heritage Center Dec. 2012.
Heavy tarnish overall. Moderate scratching. Slightly dented in center of and below engraving. Small nicks on rim of lid. Minor corrosion where handle and thumb piece connect to body and on bottom. Some polish residue in crevices.
Tin candle mold with 2 rows of 4, mounted on a raised rectangular base. The 8 molds incline toward each other at their tips and are soldered together for strength. Wire finger ring attached to one side of base and large looped strap handle at other side.
Provenance
Provenance before donor is unknown. Transferred from Heritage Center, December 2012.
Copper sculpting/modeling tool hand fashioned to create a flattened, spoon-like handle leading to a rounded shank ending in another flattened end bent at the tip to create a short 1/2" extension bent to nearly a right angle for working in clay or plaster. End is squared off. Crude but effective tool for sculpting bears marks of hammering, especially underside of flattened handle. Used by Lloyd Mifflin. Tool presumed to have been fashioned by Lloyd Mifflin himself from a length of copper. Provenance: Mifflin to the Minnich sisters to the groundskeeper at Norwood to donors.
Miniature stoneware crock made as an advertising piece for Steinman Hardware. Cylindrical body, molded rim at outside. Printed on side in cobalt blue is: "STEINMAN HDWE. CO./ LANCASTER, PA. Dark brown glaze on inside and top half of outside; bottom half is a tan glaze. Bottom unglazed with work marks over surface.
