Bodkin of bone is a flattened needle with one rounded end and one end with a blunt point. Slot of 5/8" in length is cut into body near rounded end. This tool is used for threading ribbons, etc. through casings, fabric tubes or loops.
Provenance
Collected by Lillian Hollings Kiker, born to Scottish Americans who lived in New Jersey. Born (1912) and lived in New Jersey, last of Egg Harbor, she was active with quilting, sewing, knitting & crocheting. Collection inherited by donor when her mother passed away.
Bodkin of steel is a blunt needle used for threading ribbons or other fabric through casings, loops, etc.
Two thin pieces of tapered steel are laminated together through half their length at narrow end. Two pieces at wider end are separated, allowing a ribbon or other material to be fitted into "jaws" and clamped in place via a sliding mechanism fitted into slot that extends lenthwise toward jaws. Inside of jaw ends have 3 pairs of raised barbs or teeth that enable the jaws to hold material without slipping.
Stamped on one side at midsection is "THE DOT." This likely refers to the rounded sliding mechanism fitted in the slot.
Provenance
Collected by Lillian Hollings Kiker, born to Scottish Americans who lived in New Jersey. Born (1912) and lived in New Jersey, last of Egg Harbor, she was active with quilting, sewing, knitting & crocheting. Collection inherited by donor when her mother passed away.
Bodkin of steel is a blunt needle used for threading ribbons, tape or other fabric through casings, loops, etc.
Bodkin is two thin pieces of tapered steel that are laminated together through half their length at narrow end. Two pieces at wider end are separated, allowing a ribbon or other material to be fitted into "jaws" and clamped in place via a sliding mechanism fitted into slot that extends lenthwise toward jaws. Jaws are enabled to hold material without slipping via two raised beads stamped into one side and two matching holes on other side.
Stamped onto one side of tool at midsection is "PATD. MAR. 29. 92."
Provenance
Collected by Lillian Hollings Kiker, born to Scottish Americans who lived in New Jersey. Born (1912) and lived in New Jersey, last of Egg Harbor, she was active with quilting, sewing, knitting & crocheting. Collection inherited by donor when her mother passed away.
Set of tatting tools, nickel silver plated steel, has four pieces. Each piece has in common the shaped and decorated portions, the handles of the three tools and the needle case body. This feature is a flattened octagonal shape in cross-section, with successive divots ground out with a round grinding wheel. Handles and case all taper along their length.
A. Needle case is 2.75" long and .375" wide. At the heavier end of case is a fitted cap that slides onto a smaller male extension protruding from main body. Seam visible along sides where both halves of case have been joined.
B. Hook on handle is 4" long and .25" wide. Tapers from handle end down to where shaft is attached. Shaft has ball-and-ring at handle, a slight swell along length and a minute hook at tip.
C. Awl is 3.625" long and .25" wide. Same handle as above. Shaft is similar in shape except heavier and shorter and has a sharp tip.
D. Threading tool(?) is 3" long and .5" long. Same handle as above. Shaft is shorter and has a large open loop in a teardrop shape.
Provenance
Collected by Lillian Hollings Kiker, born to Scottish Americans who lived in New Jersey. Born (1912) and lived in New Jersey, last of Egg Harbor, she was active with quilting, sewing, knitting & crocheting. Collection inherited by donor when her mother passed away.
Set of 3 steel tatting hooks, no handles. All are similar with round, tapering shanks that terminate in tiny hooks of differing sizes. Theaded at other end for fitting into a handle, now missing. Double ring turnings adjacent to threads.
Provenance
Collected by Lillian Hollings Kiker, born to Scottish Americans who lived in New Jersey. Born (1912) and lived in New Jersey, last of Egg Harbor, she was active with quilting, sewing, knitting & crocheting. Collection inherited by donor when her mother passed away.
Miniature Empire chest of drawers. Cherry case with mahogany veneer on drawer fronts and edges of top and bottom. Large top drawer overhangs three graduated drawers, all with cock beaded molding. Pressed glass pulls. Overhang of top is supported by S-scrolls at sides. Turned bulbous feet. Small nails with oblong heads used throughout.
Inscriptions in pencilled script: Under bottom drawer is "Made in 1845 by Daniel Kurtz, Lancaster, Pa." On back of 2nd bottom drawer is "Mrs. Kurtz Lancaster, Pa." Chest back has: "Made in 1845 by Daniel Kurtz" and chest bottom has "Flora Kurtz got 1889 from Grandmam when I was 13 years".
A business card, now in file, reads "DANIEL KURTZ./NO. 130 CHARLOTTE STREET,/LANCASTER, PA." On reverse side is written: "Made by Daniel Kurtz in the/ midsumer [sic] of 1845 and/ presented to Miss Lizzy Stoner/ as a token of respect/ Lizzie Stoner who in the/ same year 1845 became his/ wife, later the mother of/ E.S. Kurtz."
Daniel Kurtz, son of Conrad, was raised in the Golden Triangle area. In 1847 he renovated the "Overlook" house on Fruitville Pike and lived there until listed in 1860 Census in the SE Ward of the City
Provenance
File states donor (Mary Herr Glenn) acquired this piece from her neighbor Florence Kurtz, later Mrs. Daniel Musselman Groff.
Maker Daniel Kurtz was a carpenter/builder. Son Emanuel S. Kurtz became a job printer, resided on Church St. and Florence (Flora) was his daughter. She, at age 13, was the recipient of the chest from her "grandmam" (Lizzie Kurtz) in 1889. How and when donor acquired this chest from her neighbor Florence is unknown.
Under bottom drawer is "Made in 1845 by Daniel Kurtz, Lancaster, Pa." On back of 2nd bottom drawer is "Mrs. Kurtz Lancaster, Pa." On chest back is: "Made in 1845 by Daniel Kurtz" and chest bottom: "Flora Kurtz got 1889 from Grandmam when I was 13 years".
Inscription Type
Inscription
Object Name
Chest of Drawers
Oither Names
Miniature Chest Of Drawers
Material
Wood, Glass
Height (in)
11.25
Width (in)
8.75
Depth (in)
5
Condition
Good
Condition Date
2015-05-12
Condition Notes
Multiple blemishes overall. Top has 2 losses of veneer at right and 1 at left end. Bottom has veneer at back left edge, as well as a repaired break of this corner with leg. Long crack along grain at back.
Cane or walking stick of wood. The handle end is carved with the bust of a man.
Carving is the likeness of General Lafayette (1757-1834) who, according to family tradition, presented this cane to Amos Slaymaker when Lafayette visited White Chimneys and dined at the Slaymaker's tavern/hotel "The Pennsylvania Arms" during his grand U.S. tour in 1825. Carved gentleman wears a coat, jabot and high collar and is highly detailed. Executed in light toned hardwood, hair has light brown stain and pedestal portion is stained dark. Band of copper alloy below pedestal. Shaft of cane tapers to an end and is stained brown. Two-piece copper alloy tip, secured with two small nails.
Provenance
Passed from Amos Slaymaker through 5 generations of Slaymaker family and donated by Mrs. Samuel R. Slaymaker II.
Multiple minor nicks in carving and shaft with some loss of finish, esp. near bottom tip. Superficial checking/splitting in wood. Copper alloy tip is discolored with minor corrosion and band at top has multiple small dents. Cane tip not worn, thus not used.
Object ID
G.98.12.8
Notes
See page 30 of History of the Slaymaker family.
Place of Origin
France
Credit
Gift of Mrs. S.R. Slaymaker II, Heritage Center Collection
Cane or walking stick of hardwood with engraved gold handle. Shaft is round, tapered, ebonized wood. Handle is 3" long, tapered and 8-sided with a rounded crown. Metal fitted tip is missing.
Engraving on all sides of handle. Crown reads "Presented to Genl. Simon Cameron by the Employees of the LOCHIEL IRON WORKS as a mark of their high Appreciation of his Valuable Services in Favor of PROTECTION to American Industry." One facet of side depicts the U.S. Capitol with the slogan "LIBERTY AND PROTECTION." Opposite facet shows the Lochiel Iron Works building above the words "JUSTICE AND EQUALITY TO ALL MEN."
Lochiel Iron Works was organized in 1864. Cameron was one of the owners of the factory located along S. Cameron St. in Harrisburg. Cameron apparently championed some legislative protection for the iron industry, perhaps during his 2nd tenure as U.S. Senator, 1866-1877.
Provenance
Possession of the portrait by the Slaymaker family is probably due to the intermarriage of the Slaymaker and Cameron families. Cameron's niece (Jane Elizabeth Cameron Redsecker) married Colonel S.C. Slaymaker (1828-1894) on May 28, 1862. Then descent to widow of S.R. Slaymaker II.
Metal handle has multiple small dents, one split where the side meets the crown, and some light corrosion. Wood has moderate wear, esp. around tip. Wood has minor splitting near bottom. Tip is missing, adhesive residue remains.
Object ID
G.98.12.9
Notes
Simon Cameron became a strong advocate for the protection of the U.S. steel and iron industry against foreign imports. In appreciation, the workers at Lochiel Iron Works commissioned this cane as a gift for Cameron. The iron works was named Lochiel by Cameron to honor the Cameron family's ancestral Scottish home.
Credit
Gift of Mrs. S.R. Slaymaker II, Heritage Center Collection
Baskets pattern quilt made by Amish woman Sarah Stoltzfus (b. 6/17/1923), circa 1939 when she would have been about 16 years old. This pattern is very unusual among the Lancaster Amish.
Pieced wool top blocks on point. Pink baskets of crepe rayon(?) on a field of green alternate with turquoise-blue blocks. Wide border of green and a binding of turquoise blue, turned front to back. Back is a blue cotton print with white dots. Cotton batting.
Hand quilted in black running stitch. Border has vining flowers, tied with a bow in corners. Turquoise blocks have an unusual circle fringed with triangle points and a triple-line cross within dividing it into quadrants. Basket blocks have cable, shell and parallel lines as well as a basket "handle."
Made by Sarah Stoltzfus for herself to go to housekeeping. Her mother chose the pattern from her sister and neighbor Katie Smoker Glick (wife of "Red John" Glick) and also purchased the fabric in stores in Intercourse and New Holland. Sarah's parents were John P. Stoltzfus and Amanda L. Smoker Stoltzfus. Sarah did all the piecing and most of the quilting w/ perhaps some help from her sister.
Note: This quilt is very similar to two other quilts (owned by Trish Herr and Jay & Susan Leary).
RD#1 Millwood Rd., Gap, PA 17527, Salisbury Twp.
Provenance
Sold by maker in 1988 to Tom Wentzel of Lititz, a dealer, who sold to M. Finkel & Daughter, dealers on Pine St. in Phila. (all transactions occurred in the same year). See 2004 fieldwork notes of Rachel Pellman.
