Skip header and navigation

Revise Search

168 records – page 1 of 17.

Collection
Heritage Center Collection
Object ID
G.05.15.22
Collection
Heritage Center Collection
Description
Stiletto or awl of steel with wood handle and handmade protective tip.
Tool has a shaft of rounded steel coming to a sharp point. Mounted on a black-painted, turned wood handle, largest at end and tapering toward steel shaft where it terminates with two turned rings.
A chromed metal slide glides along tool shaft and is clamped in place with a knurled screw. Stamped on this slide is "PATD' APR-6-09" (or 00) and nearby is a symbol with the words "TRADE/ MARK."
Stiletto is fitted with a protective tip made of a bottle cork with crocheted cover and crocheted top ring.
Provenance
Collected by Lillian Hollings Kiker, born to Scottish Americans who lived in New Jersey. Born (1912) and lived in New Jersey, last of Egg Harbor, she was active with quilting, sewing, knitting & crocheting. Collection inherited by donor when her mother passed away.
Year Range From
1900
Year Range To
1930
Storage Location
LancasterHistory, Lancaster, PA
Storage Room
DAC
Storage Wall
Island 4
Storage Cabinet
Unit 19
Storage Container
Box 1002: Sewing & Needlework
Subcategory
Textileworking T&E
Object Name
Awl, Sewing
Material
Wood, Metal
Length (in)
5.75
Width (in)
0.75
Dimension Details
Width is the cork; length includes cork protector.
Condition
Good
Condition Date
2015-04-29
Condition Notes
Minor wear to finish of metal and wood.
Object ID
G.05.15.22
Credit
Gift of Susan Garofola in memory of Lillian Kiker (mother), Heritage Center Collection
Accession Number
G.05.15
Less detail
Collection
Heritage Center Collection
Object ID
P.97.08.5
Date Range
c. 1820
Collection
Heritage Center Collection
Description
Pewter beaker or handleless cup. Part of the Warwick Congregation's (now known as the Brickerville United Lutheran Church) communion service.
Cylinder form flares out slightly at bottom as well as top. Banded at base.
Engraved on the exterior, near top, are the small initials "M.W."
Provenance
The entire communion service remained in use over the years until the congregation decided in 1997 to find a safe place for this valuable communion set. Purchased by the Heritage Center of Lancaster County.
Date Range
c. 1820
Made By
Boardman, Thomas D. and Sherman, attributed
Storage Location
LancasterHistory, Lancaster, PA
Storage Room
DAC
Storage Wall
West Wall
Storage Cabinet
Unit 32
Storage Shelf
Shelf 4
Subcategory
Food Service T&E
Object Name
Beaker
Material
Pewter
Height (in)
3.625
Diameter (in)
2.875
Dimension Details
Diameter of bottom is listed. Diameter of top is 2.5".
Condition
Good
Condition Date
2014-08-28
Condition Notes
Overall abrasions, pitting, small dents and staining. Rim has multiple small dents and abrasions. Bottom interior is pitted. Wear underneath with some areas slightly cracked. Dent at base.
Object ID
P.97.08.5
Place of Origin
Hartford, Connecticut
Credit
Acquired through the generosity of the James Hale Steinman Foundation and Friends of the Heritage Center Museum, Heritage Center Collection
Accession Number
P.97.08
Less detail
Collection
Heritage Center Collection
Object ID
G.08.09.1
Date Range
1825
Collection
Heritage Center Collection
Description
Bronze bell cast by the firm of John Wilbank in 1825 for use in the cupola of the Lancaster County Courthouse on Penn Square that replaced the first building and bell destroyed by fire in 1784. The 2nd courthouse was rebuilt 1784-1787 and razed in the Spring of 1853. Bell has raised lettering at top of side: "CAST BY JOHN WILBANK/ PHILADA 1825."
Bell itself (H: 19" W: 23 1/2") has classic shape. There are heavy, curved "loops" of brass at top by which the bell is suspended from a yoke-like assembly secured by heavy bolts. The two side arms of the yoke rest atop pivot points of two A-shaped cast iron supports at each side of bell. This entire arrangement rested on a square base of heavy oak beams which was mounted in the belfry of the Rohrer farmhouse located at the east edge of East Petersburg. A large wooden wheel serving as a pulley was affixed to one side of the yoke of bell and a rope could be used to swing and thus ring the bell from below. (All wood was quickly removed & destroyed due to winged ant/termite infestation and advanced rot.)
Bell was regularly used in courthouse to strike the hour via the tower clock as well as for announcing a range of other events and news, e.g. election results and marking the start of business in city market houses on market days.
Provenance
When the courthouse was razed in 1853, the bell was acquired by veterinarian Jacob Rohrer (1792-1872) who installed it in a small belfry in his 1812 farmhouse on Fruitville Pike east of East Petersburg. It was then installed in a new (1857) farmhouse built to the west toward E. Petersburg by son Peter Bachman Rohrer (1827-1900). It remained here until removed and donated to HCLC except for a brief period in 1918 when it was allowed by owner P. Bachman Rohrer (1875-1949) to return to Penn Square for installation in the "Liberty House", a replica of the old courthouse (now in Bachman Park at F&M). See 1918 newsclipping in file. See also a 1942 newclipping giving an undocumented history of a courthouse bell used 1787-1852. (?)
Date Range
1825
Year Range From
1825
Year Range To
1825
Made By
John Wilbank Foundry
Storage Location
LancasterHistory, Lancaster, PA
Storage Room
DAC
Storage Wall
East Wall
Storage Cabinet
Unit 54
People
Wilbank, John
Object Name
Bell
Material
Bronze
Height (cm)
76.2
Height (ft)
2.5
Height (in)
30
Width (cm)
76.2
Width (ft)
2.5
Width (in)
30
Dimension Details
Height is to top of spike. Width is the yoke.
Condition
Good
Condition Date
2017-11-20
Condition Notes
Overall bronze surface weathered and darkened with age & use, deterioration & repairs evident on sides, lip at bottom has extensive chipping. Iron yoke, etc. heavily rusted.
Object ID
G.08.09.1
Notes
Newsclipping "Bell is Discovered", Oct. 14, 1918.
Newsclipping "The Farmer Hid The Bell", June 13, 1942
Bachman history by David Johnson
Place of Origin
Philadelphia, Pennsylvania
Credit
Courtesy of LancasterHistory, Lancaster, Pennsylvania.
Accession Number
G.08.09
Less detail
Collection
Heritage Center Collection
Object ID
G.05.15.25a-b
Collection
Heritage Center Collection
Description
Stiletto or bodkin of turned bone, fitted in a conical basket-weave holder or sheath.
Stiletto (A) has ball-shaped head with hole in it, then narrowing to a neck with additional swells and narrowing until it tapers from midsection down to a sharp point.
Holder (B) is an elongated cone made with a brown reed-like material woven onto ribs like a basket. Handle is a twisted form of the same material, shaped in a double loop configuration.
It is assumed that this pair of otems were originally dwsigned for each other.
Provenance
Collected by Lillian Hollings Kiker, born to Scottish Americans who lived in New Jersey. Born (1912) and lived in New Jersey, last of Egg Harbor, she was active with quilting, sewing, knitting & crocheting. Collection inherited by donor when her mother passed away.
Year Range From
1900
Year Range To
1930
Storage Location
LancasterHistory, Lancaster, PA
Storage Room
DAC
Storage Wall
Island 4
Storage Cabinet
Unit 19
Storage Container
Box 1002: Sewing & Needlework
Subcategory
Textileworking T&E
Object Name
Bodkin
Material
Bone
Length (in)
3.5
Width (in)
1
Dimension Details
Stiletto is L: 2.875" Dia: .25"
Condition
Good
Condition Date
2015-04-29
Condition Notes
Very good condition.
Object ID
G.05.15.25a-b
Credit
Gift of Susan Garofola in memory of Lillian Kiker (mother), Heritage Center Collection
Accession Number
G.05.15
Less detail
Collection
Heritage Center Collection
Object ID
G.05.15.30
Collection
Heritage Center Collection
Description
Bodkin of bone is a flattened needle with one rounded end and one end with a blunt point. Slot of 5/8" in length is cut into body near rounded end. This tool is used for threading ribbons, etc. through casings, fabric tubes or loops.
Provenance
Collected by Lillian Hollings Kiker, born to Scottish Americans who lived in New Jersey. Born (1912) and lived in New Jersey, last of Egg Harbor, she was active with quilting, sewing, knitting & crocheting. Collection inherited by donor when her mother passed away.
Year Range From
1890
Year Range To
1930
Storage Location
LancasterHistory, Lancaster, PA
Storage Room
DAC
Storage Wall
Island 4
Storage Cabinet
Unit 19
Storage Container
Box 1002: Sewing & Needlework
Subcategory
Textileworking T&E
Object Name
Bodkin
Material
Bone
Length (in)
3.5
Depth (in)
0.5
Diameter (in)
0.25
Condition
Good
Condition Date
2015-04-30
Condition Notes
Good condition with minor surface abrasions.
Object ID
G.05.15.30
Credit
Gift of Susan Garofola in memory of Lillian Kiker (mother), Heritage Center Collection
Accession Number
G.05.15
Less detail
Collection
Heritage Center Collection
Object ID
G.05.15.31
Collection
Heritage Center Collection
Description
Bodkin of steel is a blunt needle used for threading ribbons or other fabric through casings, loops, etc.
Two thin pieces of tapered steel are laminated together through half their length at narrow end. Two pieces at wider end are separated, allowing a ribbon or other material to be fitted into "jaws" and clamped in place via a sliding mechanism fitted into slot that extends lenthwise toward jaws. Inside of jaw ends have 3 pairs of raised barbs or teeth that enable the jaws to hold material without slipping.
Stamped on one side at midsection is "THE DOT." This likely refers to the rounded sliding mechanism fitted in the slot.
Provenance
Collected by Lillian Hollings Kiker, born to Scottish Americans who lived in New Jersey. Born (1912) and lived in New Jersey, last of Egg Harbor, she was active with quilting, sewing, knitting & crocheting. Collection inherited by donor when her mother passed away.
Year Range From
1900
Year Range To
1925
Storage Location
LancasterHistory, Lancaster, PA
Storage Room
DAC
Storage Wall
Island 4
Storage Cabinet
Unit 19
Storage Container
Box 1002: Sewing & Needlework
Subcategory
Textileworking T&E
Object Name
Bodkin
Material
Steel
Length (in)
2.75
Width (in)
0.125
Depth (in)
0.5
Condition
Good
Condition Date
2015-04-30
Condition Notes
Minor surface abrasions and several minor points of corrosion.
Object ID
G.05.15.31
Credit
Gift of Susan Garofola in memory of Lillian Kiker (mother), Heritage Center Collection
Accession Number
G.05.15
Less detail
Collection
Heritage Center Collection
Object ID
G.05.15.32
Collection
Heritage Center Collection
Description
Bodkin of steel is a blunt needle used for threading ribbons, tape or other fabric through casings, loops, etc.
Bodkin is two thin pieces of tapered steel that are laminated together through half their length at narrow end. Two pieces at wider end are separated, allowing a ribbon or other material to be fitted into "jaws" and clamped in place via a sliding mechanism fitted into slot that extends lenthwise toward jaws. Jaws are enabled to hold material without slipping via two raised beads stamped into one side and two matching holes on other side.
Stamped onto one side of tool at midsection is "PATD. MAR. 29. 92."
Provenance
Collected by Lillian Hollings Kiker, born to Scottish Americans who lived in New Jersey. Born (1912) and lived in New Jersey, last of Egg Harbor, she was active with quilting, sewing, knitting & crocheting. Collection inherited by donor when her mother passed away.
Year Range From
1892
Year Range To
1920
Storage Location
LancasterHistory, Lancaster, PA
Storage Room
DAC
Storage Wall
Island 4
Storage Cabinet
Unit 19
Storage Container
Box 1002: Sewing & Needlework
Subcategory
Textileworking T&E
Object Name
Bodkin
Material
Steel
Length (in)
2.25
Width (in)
0.125
Condition
Good
Condition Date
2015-04-30
Condition Notes
General distortion throughout. Minor surface abrasions and several minor points of corrosion.
Object ID
G.05.15.32
Credit
Gift of Susan Garofola in memory of Lillian Kiker (mother), Heritage Center Collection
Accession Number
G.05.15
Less detail
Collection
Heritage Center Collection
Object ID
G.05.15.18
Collection
Heritage Center Collection
Description
Ribbon threader or bodkin is a blade of nickel-plated non-ferrous metal, in a torpedo shape, wide and rounded at one end and tapering to a point at other end. Two slots are cut in wide end for stringing ribbon that needs to be threaded through casings in waistbands, wristbands, etc.
Stamped inscriptions: On one side of tool is "RIBBON THEADER", "REGISTERED", "No. 3", AND "K.B.C.".
Provenance
Collected by Lillian Hollings Kiker, born to Scottish Americans who lived in New Jersey. Born (1912) and lived in New Jersey, last of Egg Harbor, she was active with quilting, sewing, knitting & crocheting. Collection inherited by donor when her mother passed away.
Year Range From
1890
Year Range To
1925
Storage Location
LancasterHistory, Lancaster, PA
Storage Room
DAC
Storage Wall
Island 4
Storage Cabinet
Unit 19
Storage Container
Box 1002: Sewing & Needlework
Subcategory
Textileworking T&E
Object Name
Bodkin
Material
Metal
Length (in)
3.25
Width (in)
0.625
Condition
Good
Condition Date
2015-04-28
Condition Notes
Minor areas of corrosion & tarnish.
Object ID
G.05.15.18
Credit
Gift of Susan Garofola in memory of Lillian Kiker (mother), Heritage Center Collection
Accession Number
G.05.15
Less detail
Collection
Heritage Center Collection
Title
Woman's Bonnet
Object ID
G.90.07.02
  1 image  
Collection
Heritage Center Collection
Title
Woman's Bonnet
Description
Woman's cotton lawn headcovering. Crown is two separate pieces of fabric, with additional small pieces at the lower front corners. Plain ruffle around front and bottom. Two hemmed cotton ribbons attached at lower front corners; narrow where they attach, widening at the bottom. (Written by Scott Sager.)
Provenance
This pieces was owned and worn by Elizabeth Schneider Mann (1780-1870), the wife of Johannes Mann (1774-1843). She was the great-great grandmother of the donor'ssabalo husband, Rich Hess Mann. Elizabeth Schneider Mann's son, George Snyder Mann, gave the piece to his granddaughter-in-law, Anna Huber Hess, who gave it to her daughter-in-law, the donor Mary Jane Mann.
Year Range From
1820
Year Range To
1840
Storage Location
LancasterHistory, Lancaster, PA
Storage Room
DAC
Storage Wall
Island 2
Storage Cabinet
Unit 13
Storage Shelf
Shelf 3
Storage Container
Box 0059
Object Name
Bonnet
Height (cm)
22.86
Height (ft)
0.75
Height (in)
9
Width (cm)
24.13
Width (ft)
0.7916666667
Width (in)
9.5
Condition
Good
Condition Date
2001-05-23
Condition Notes
Roughly rectangular outline of brown stains at the back; several lighter brown marks on public right side.
Object ID
G.90.07.02
Notes
Given in memory of Dr. Richard H. Mann.
Images
Less detail
Collection
Heritage Center Collection
Title
Woman's Headcovering
Object ID
G.90.07.03
  1 image  
Collection
Heritage Center Collection
Title
Woman's Headcovering
Description
Woman's headcovering with a 'dotted Swiss' pattern. Netted ruffle around front and bottom. Black silk ribbons attached at bottom front with metal hooks.
This piece was owned and worn by Elizabeth Schneider Mann (1780-1870), the wife of Johannes Mann (1774-1843). She was the great-great-grandmother of the donor's husband, Richard Hess Mann. Elizabeth Schneider Mann's son, George Snyder Mann, gave the piece to his grand-daughter-in-law, Ann Huber Hess, who gave it to her daughter-in-law, the donor, Mary Jane Mann.
(Written by Wendell Zercher)
Provenance
Donor, Mrs. Richard (Mary Jane) H. Mann. Given in memory of Dr. Richard H. Mann.
Year Range From
1820
Year Range To
1840
Storage Location
LancasterHistory, Lancaster, PA
Storage Room
DAC
Storage Wall
Island 2
Storage Cabinet
Unit 13
Storage Shelf
Shelf 3
Storage Container
Box 0059
Object Name
Bonnet
Height (cm)
25.4
Height (ft)
0.8333333333
Height (in)
10
Width (cm)
22.86
Width (ft)
0.75
Width (in)
9
Condition
Fair
Condition Date
2001-05-23
Condition Notes
Brown stains on both sides and around ruffle. Black silk ribbons are very worn and frayed, especially the one on the proper left side.
Object ID
G.90.07.03
Images
Less detail

168 records – page 1 of 17.