Pair of ice skates (A-B), housed in custom-fitted wooden case. (C)
Skates constructed to steel plate in shape of foot surmounted on a .25-inch-thick blade terminating in a scrolled toe. Skates are identical with no right or left differentiation. One skate has four additional holes in heel. Three leather straps with buckles are riveted to foot plate. Dimension of skates: H: 4.5"; W: 4"; :" 12".
Bottom of each skate's footplate is stamped: "EICHHOLTZ & BRO/LANCASTER, PA."
Box, softwood, dovetail construction, painted dark green with a ghost of floral decoration evident on lid, front and sides. Has hinged lid leading to fitted interior covered with coarse green fabric pasted and tacked to wood and edged with braiding. (Written by Wendall Zercher)
Provenance
Research done by Tom Ryan of L.C.H.S., suggests that according to Lancaster Directories, Eichholtz & Bro. were operating in Lancaster City possible as early as 1858 and at least as late as 1870. Jacob Eichholtz' sons, Robert Lindsay and Henry Clay, were in partnership, listed as gunsmiths by 1863 and cutlery by 1866 until at least 1870.
Year Range From
1858
Year Range To
1873
Storage Location
LancasterHistory, Lancaster, PA
Storage Room
DAC
Storage Wall
Island 1
Storage Cabinet
Unit 09
Storage Shelf
Shelf 4
Object Name
Skate, Ice
Height (cm)
0.01524
Height (ft)
0.0005
Height (in)
0.006
Length (cm)
31.115
Length (ft)
1.0208333333
Length (in)
12.25
Width (cm)
15.875
Width (ft)
0.5208333333
Width (in)
6.25
Dimension Details
Above measurements are for the box for the skates.
Condition
Good
Condition Date
2003-04-17
Condition Notes
Skates are largely intact, metal has slight corrosion overall, leather straps are deteriorated with losses (two missing on one skate and one on the other). Box appears to have been repainted and is very soiled. Interior has worn "upholstery" with losses of braiding. Hinges have been repaired and handle is missing.
Copper tea kettle, classic form with gooseneck spout, high dome lid, marked strap handle hinged on "plinth w/ serifs" tab bases. Lid fitted with a crudely fashioned replaced iron or steel mushroom-shaped finial, bent to one side.
Vertical dove-tailed seam on side opposite spout, top seam running length of spout. Dove-tailed bottom.
Tarnished with numerous dents and scratches over body. Two very heavy dents at shoulder, opposite each other and one on bottom. Finial knob bent to one side. Two significant cracks on proper right side at shoulder and one on back.
Object ID
P.01.48.1
Place of Origin
Lancaster
Credit
Heritage Center Collection. Purchased through the generosity of the James Hale Steinman Foundation
Compass housed in a round, turned brass case with fitted lid. Scored circles decorate exterior. Inside case bottom is paper printed with decoration and cardinal points. Blued needle has gold-stenciled "N" on one end. Flat glass window on top held with brass retaining ring. Lid screws onto case bottom.
Handwritten note states compass brought to America from Nuremburg, Germany by immigrant ancestor John Leonard Ellmaker(1697-1782) in 1726.
Unknown German maker
Provenance
Descent within Ellmaker family to donor, then donated to the Heritage Center.
Copper sculpting/modeling tool hand fashioned to create a flattened, spoon-like handle leading to a rounded shank ending in another flattened end bent at the tip to create a short 1/2" extension bent to nearly a right angle for working in clay or plaster. End is squared off. Crude but effective tool for sculpting bears marks of hammering, especially underside of flattened handle. Used by Lloyd Mifflin. Tool presumed to have been fashioned by Lloyd Mifflin himself from a length of copper. Provenance: Mifflin to the Minnich sisters to the groundskeeper at Norwood to donors.
Strainer of glazed redware, but with a lighter brown color than most redware. Resting on three tapered 1-1/8 " long feet. The flat-bottomed dish has straight sides that flare out to a molded, high lip. Applied handles at sides. Large holes in bottom and three rows of smaller holes at sides.
Lead glaze overall with some streaks/runs of a darker brown.
Numerous chips on body overall; some large ones on underside and a large chip on the side; handle edges have suffered the most significant chipping loss. Glaze is crackled overall and has some staining, particularly on the interior. Feet are moderately worn.
Object ID
G.98.12.17
Place of Origin
Pennsylvania
Credit
Gift of Mrs. S.R. Slaymaker II, Heritage Center Collection
Large scale pedimented door surround of painted softwood and replaced slate, from the George Ross mansion built on the NW corner of Duke & E. King Sts., Lancaster. Doric Order doorway with full treatment of the entablature. A projecting pediment rests on two fluted, engaged columns flanking a recessed, arched doorway with raised panels at sides and top. A keystone is centered at top of door casing. Fanlight with tracery above doorway. Bold moldings at cornice of pediment decorated with mutules. Triglyphs below.
"This painted doorway is the most elaborate now known to survive from pre-Revolutionary Lancaster County", states John J. Snyder.
Provenance
Removed by Ross' gr. granddaughter Ann Coleman Hopkins Lightner when house was razed in 1851 or 52 to make room for the oldest section of the present Lanc. Co. courthouse. Reinstalled at Lightner mansion at corner of N. Duke & Lemon Sts. Removed when house was razed in 1963 and given to LCHS.. Then placed on permanent loan with the Heritage Center where it was installed in the Masonic Lodge in 1977. Transferred Dec. 1997 to Heritage Center. Removed in 2000 and reinstalled at 7 W. King St. in museum lobby in 2002 where it is now on loan to Lancaster City.
Generally intact with presumed replacement parts due to multiple usage. Any replacement parts not visible under multiple coats of paint. Some missing elements such as circular pieces of "leggo block" moldings under cornice and part of projecting portion of the right capital. There is no door and slate is not original.
Object ID
G.97.45.1
Place of Origin
Lancaster
Credit
Heritage Center Collection, gift of Lancaster County His
Redware jar of square body with four sides, each press-molded with the same recessed oval having raised design of C-scrolls, flowers and leaves. Corners of body are chamfered. Round neck supports a wide round mouth with protruding lip. No recess for a lid. Bottom is recessed with an impressed marking: "D. OBER,S./ POTTERY." Dark brown body has lead glaze overall. Three furniture marks on bottom from the firing.
Very small redware jar, squat ovoid shape with small foot ring and flaring rim. Orange-brown body, decorated with random slanted swaths of dark manganese. Tin glazed inside and out except for bottom 1/5 of exterior and bottom.
Unique inscription: "A Bixler" is impressed on bottom with printer's fraktur typeface.
East Earl Twp. or Brecknock Twp. Attributed to Absalom Bixler (1802-1884).
Coffepot (A) and lid (B) of blue transfer-printed pearlware. On a pedestal base is an octagonal pear-shaped body flaring back out at recessed rim. Gooseneck spout with cap at tip. High arching handle of C-scrolls. Domed octagonal lid has an octagonal knop/finial and tiny vent hole.
Transfer decoration is a Chinese scene with people, trees, water and pagoda with bridges. Additional decoration at top and base is a filigree-edged band dominated by 3-leafed vine.
Yellow earthenware lobe-paneled spittoon decorated with streaked and spattered dark brown manganese under a clear lead glaze. Oval drain hole on side. Underside has impressed maker's name in block letters: "Eagle/ Porcelain Works / Lancaster City, PA / Henry Gast, S.Q. St. "
