a) Silver teapot with carved wooden handle; with three letter script monogram and decorative flourish on two sides; decorated base; gallery row. Stamped "D HALL" on bottom.
Mahogany cased square piano has curly maple? frontispiece/nameboard painted with an oval cartouche with"John Wind / Lancaster" flanked by colorful floral sprays (likely painted by Eichholtz). Crossbanded mahogany veneer, front and sides and a diamond shaped ivory lock escutcheon centered at front of folding keyboad lid. Square tapered legs terminate with brass cuffs and casters. One high stretcher at both ends. Exposed head bolts at sides. Entire top hinges up exposing soundboard with strings and hammers.
Black keys are ebonized maple topped with ebony veneer. Ivory covered white keys. Dummy key at left end.
Inscription: Pencilled script on reverse of nameboard unclear (need UV light to read).
Made by John Wind (1783-1858). Owned by Aida Shaibly Myers, Lancaster, PA, 1812.
Provenance
Donor: Aida M. Houston (estate). Info derived from archives and donor cards. Note: 2015 research found probable identity & family members of Aida, in file.
Over-cleaned finish. Overall in better shape than other known Winds, per Ray Brunner. Soundboard is twisted in length due to string tension with some replaced strings. Many fine strings unattached & snarled at right interior. Dummy key at left end of keyboard. Bolt covers at leg tops missing. Scratch across front. NOTE: Hinge at left side of top board missing its pin; inserted nail.
Object ID
1964.016
Notes
In Historical Soc. of Pennsylvania's Daybook of J. Eichholtz on page 30 is an entry dated March 1, 1810 for John Wind: "To painting frontispiece" with a charge of 15. This is presumably for this, or another, piano.
An identical entry on page 20 for organmaker Conrad Doll dated May 19, 1809 lists "To painting a frontispiece" for the same charge of 15. (Copies of these pages in file P.86.3 for Eichholtz copper measure).
Birth certificate done in German for "Anna Schenkin" (Schenk), born in "Connostoge Taunschip Langster County", November 20, 1783. Hand drawn, colored and lettered on laid paper with iron gall ink. No baptism indicates a Mennonite family.
The text is enclosed within a heart, surrounded by various vining flowers and four birds, two above and two below. The design conforms with artist's normal pattern of having the vines emanate from a hole at the top center of the heart. This artist made fraktur for mostly Lancaster County Mennonite families. He was almost certainly a schoolmaster. There are about 15 of his fraktur that are documented.
"Johannes Schopf/Schopp Artist" (active c. 1774-1800)
Note written on frame's dust cover by Smith states this fraktur was exhibited in two shows: Allentown Folk Art Show (Nov. 1974) and William Penn Memorial Museum, F/A Show (Jan. 1975).
Slide #27-2-4 in Archives West.
Provenance
Purchased by Richard Flanders Smith at a public sale along Route 222, north of Willow Street. Given to the Lancaster County Historical Society with the understanding that it would become part of the Heritage Center collection with the establishment of that institution.
Foxing or brown spotting over much of surface. Some tears along the edges. Moisture or adhesive stain at bottom center.
A condition report and treatment proposal was done by the Conservation Center for Art and Historic Artifacts in Philadelphia in 1986. Matted and framed by conservator Brian Howard of Carlisle in 1996.
Object ID
G.77.50.11
Place of Origin
Conestoga Twp.
Credit
Gift of Mr. & Mrs. Richard Flanders Smith, Heritage Center Collection
Clock wheel cutting machine used by Lancaster clockmaker Martin Shreiner, Sr. Made of steel and brass with turned wood handle knob on crank. Main frame of tool is steel resting on four rounded, downward-curving legs with coin-shaped feet. Many moving parts, arms and cranks/screws, including the swiveling cutting yoke/frame at top (cutter blade with arbor/spindle missing) and the shaped index arm that "reads" the holes on the 13"-diameter brass wheel furnished with concentric circles of surface holes.
The LaFonds call this a very sophisticated machine, incorporating Swiss, German and English ideas/influences. This indicates to them that the machine was made in America, very likely by Shreiner himself. It was imperative for clockmakers to own this tool to practice their trade. Few survive. This machine was first described in the early book or article (LCHS Bulletin) printed in 1917(or 1919) & 1939 by D. McGee who wrote about Lancaster clockmaking. Ed believes this machine to be "the finest American engine in existence" and that it very well may have been made by Shreiner, probably in the 1790s. The cutter blade was used to cut the teeth on the large brass wheels that turn the pinions. There would have been either a slitting cutter or a form cutter used. Carter Harris says form cutters were used by the 1790s.
Attributed to Martin Shreiner (1769-1866).
An 8x10 B&W photo is in picture file under "clocks." Also slide is in slide collection, #14-3-11.
Lancaster Borough, most likely
Provenance
Owned by two brothers, Samuel K. and William L. Fraser, clockmakers who lived in Lincoln (just west of Ephrata) and grandsons of clockmaker William Fraser (1801-1877), then to early collector Earl T. Strickler (FNAWCC) who had it on display at the Columbia Clock and Watch Museum. Upon Strickler's sudden death circa 1974, it was sold by his widow, Mary Jane Strickler, to Edward F., Jr. and Virginia A. LaFond who removed rust and kept it on a window sill. They then traded it to dealer Jamie Price for some clocks. Price had it on sale at the 2004 Philadelphia Antiques Show in mid-April where, as representative for the von Hess Foundation, Tom Cook, purchased it for this museum's collections.
Ed LaFond believes the Fraser family was related to the Gorgas family, thus they were in a position to inherit tools. Due to this, it was believed at first that both the machine and the scribe were from the Gorgas family. However, LaFond believes the Frasers were also related to the Shreiners. Stacy Wood claims this machine was one of Martin Shreiner's tools (Vol. 96, LCHS Journal).
Pitting on steel surfaces, slight discoloration on brass parts, signs of wear overall.
Object ID
G.04.19.1
Notes
Information from: Clockmakers of Lanc. Co., Wood/Kramer, 1977, p. 142. 225 Years of Timepieces (Catalog of 1st Annual Exh. of NAWCCM, 1979), p. 63. Stacy Wood researched origins and provenance of these tools and wrote article in Vol. 96 #4 of LCHS Journal. Conversations with Virginia LaFond ( 5/19/04), Ed LaFond (7/6/04) and Carter Harris (7/7/04).
Place of Origin
Lancaster
Usage
Shreiner, Martin
Credit
Gift of the Richard C. von Hess Foundation, Heritage Center Collection
Dial scribe used originally for engraving circular lines (chapter rings) in brass dials. Converted for use with later white-painted dials (probably held a pen, according to clock expert Ed LaFond). Used by Jacob Gorgas (1728-1798). Maker unknown; most likely Lancaster Borough.
The tool arm is created from a foot-long bar of iron, rectangular in section. One end is enlarged and fitted with a vertical attachment made of cone-shaped iron surmounted by a turned wooden (walnut?) handle. This vertical attachment comes to a blunt point at the bottom. A shaped sleeve fits onto the horizontal iron bar and is fitted with a vertical hexagonal hole at one side. Two iron thumb screws are positioned at each side of sleeve.
Provenance
Owned by two brothers, Samuel K. and William L. Fraser, clockmakers who lived in Lincoln (just west of Ephrata) and grandsons of clockmaker William Fraser (1801-1877), then to early collector Earl T. Strickler (FNAWCC) who had it on display at the Columbia Clock and Watch Museum. Upon Strickler's sudden death circa 1974, it was sold by his widow, Mary Jane Strickler, to Edward F., Jr. and Virginia A. LaFond who owned it for "20 some" years. They then traded it to dealer Jamie Price for some clocks. Price had it on sale at the 2004 Philadelphia Antiques Show in mid-April where, as representative for the von Hess Foundation, Tom Cook, purchased it for this museum's collections.
Ed LaFond believes the Fraser family was related to the Gorgas family, thus they were in a position to inherit tools. Due to this, it was believed at first that both the machine and the scribe were from the Gorgas family. However, LaFond believes the Frasers were also related to the Shreiners.
Iron surface is pitted from corrosion, now stable. Turned wood handle is moderately worn and scarred with a broken off piece creating one flattened side. Wood is also checked (cracked) throughout neck.
Object ID
G.04.19.2
Notes
Stacy Wood researched origins and provenance of these tools and wrote an article in Vol. 96 #4 of LCHS Journal. Conversations with Virginia LaFond ( 5/19/04) and Ed LaFond (7/6/04).
Place of Origin
Lancaster
Usage
Gorgas, Jacob, 1728-1798
Credit
Gift of the Richard C. von Hess Foundation, Heritage Center Collection