Painting: Framed under glass, charcoal enhanced photograph, laid down on cotton stretcher, Poor/Fair condition, water stained throughout, surface loss at corners, insect damage.
Painting conservation needs: Remove from frame, surface clean, reback with acid free materials, refit with spacer using UVF glass.
Frame: Poor/Fair, compo. loss throughout, 3" ornate gold.
A: Homemade awl or piercing tool with hand-shaped shank with turned up tip set into a crude wooden handle with no finish. L: 5.25"
B: Awl or bodkin with decoratively turned walnut or rosewood handle fitted with a foresection of bone set into handle that tapers to a sharp point. L: 5"
C: Section of cow's horn (thumb protector?) L: 3.25"
D. Section of cow's horn (thumb protector?) L: 3"
Provenance
These four items were designated as basketweaving tools by donor. Unknown origin.
Glove stretcher is cast, nickel-plated brass (?). Made of two opposing lengths of tapered, rounded metal, spring operated. Dog's leg shape tool has handle cast with raised, scrolled decoration. Opposite end is tapered so it fits into glove fingers for stretching after being heated. The larger end of the taper is inset with lead for holding heat.
Inscriptions: "THE / FOSTER GLOVE STRETCHER" is on one handle and the other has "PATENTED JULY 27, 1888."
Provenance
Collected by Lillian Hollings Kiker, born to Scottish Americans who lived in New Jersey. Born (1912) and lived in New Jersey, last of Egg Harbor, she was active with quilting, sewing, knitting & crocheting. Collection inherited by donor when her mother passed away.
Button-hole cutter, creaser or marking tool is silver plated ferrous metal.
In form of a miniature spoon with a blade instead of a bowl. Blade is eye-shaped with raised midline extending from tip to tip. Edges of blade are fairly sharp. Handle end has the bust of a crowned femal monarch with long flowing hair and necklace above a decorative base of scrolls surrounding a cabochon. Shaft of tool is similar to an architectural column. Entire handle is made of two identical halves, cast and joined with side seams visible.
Provenance
Collected by Lillian Hollings Kiker, born to Scottish Americans who lived in New Jersey. Born (1912) and lived in New Jersey, last of Egg Harbor, she was active with quilting, sewing, knitting & crocheting. Collection inherited by donor when her mother passed away.
Some tarnish overall. Large dent in one cabochon and small dent in the other.
Object ID
G.05.15.19
Notes
See another example of this ring found on internet in this file. Iguala is a town near the renowned silvermaking town of Taxco (near the west coast of Mexico) where William Spratling, in the 1930s, famously reinstituted the silver industry and craftsmanship that had died centuries before.
Credit
Gift of Susan Garofola in memory of Lillian Kiker (mother), Heritage Center Collection
Hem gauge or measure of ferrous metal, electroplated nickel silver blade with a sterling silver plated handle. Handle is a pierced foliate design with a rose at top. A heart motif is at center of handle. Blade extends form handle in the form of a ruler 3 inches long. Moveable clamp with pointed tip can be locked in place along gauge.
Possibly made by the Webster Silver Company. Inscription: Marked "STERLING" on both sides of handle with the Webster Silver Company mark alongside - a "W" on an arrow.
Provenance
Collected by Lillian Hollings Kiker, born to Scottish Americans who lived in New Jersey. Born (1912) and lived in New Jersey, last of Egg Harbor, she was active with quilting, sewing, knitting & crocheting. Collection inherited by donor when her mother passed away.
Set of tatting tools, nickel silver plated steel, has four pieces. Each piece has in common the shaped and decorated portions, the handles of the three tools and the needle case body. This feature is a flattened octagonal shape in cross-section, with successive divots ground out with a round grinding wheel. Handles and case all taper along their length.
A. Needle case is 2.75" long and .375" wide. At the heavier end of case is a fitted cap that slides onto a smaller male extension protruding from main body. Seam visible along sides where both halves of case have been joined.
B. Hook on handle is 4" long and .25" wide. Tapers from handle end down to where shaft is attached. Shaft has ball-and-ring at handle, a slight swell along length and a minute hook at tip.
C. Awl is 3.625" long and .25" wide. Same handle as above. Shaft is similar in shape except heavier and shorter and has a sharp tip.
D. Threading tool(?) is 3" long and .5" long. Same handle as above. Shaft is shorter and has a large open loop in a teardrop shape.
Provenance
Collected by Lillian Hollings Kiker, born to Scottish Americans who lived in New Jersey. Born (1912) and lived in New Jersey, last of Egg Harbor, she was active with quilting, sewing, knitting & crocheting. Collection inherited by donor when her mother passed away.
Set of 3 steel tatting hooks, no handles. All are similar with round, tapering shanks that terminate in tiny hooks of differing sizes. Theaded at other end for fitting into a handle, now missing. Double ring turnings adjacent to threads.
Provenance
Collected by Lillian Hollings Kiker, born to Scottish Americans who lived in New Jersey. Born (1912) and lived in New Jersey, last of Egg Harbor, she was active with quilting, sewing, knitting & crocheting. Collection inherited by donor when her mother passed away.
