Skip header and navigation

Revise Search

49 records – page 1 of 5.

Collection
Tool Collection: Textiles
Object ID
1977.007.2
Collection
Tool Collection: Textiles
Description
Small brown leather covered wooden sewing box with compartmented interior. Leather-hinged lift lid with metal clasp at front, now detached at both clasp and hinge. Underside of lid has 3 leather strap holders, each holding a paper packet of needles. Gold-stamped mark at top center of underside is "CROSS/ LONDON".
Interior has additional fitted lid covering the front section of 3 small compartments. On top of cover are two leather loop holders. Small right rear compartment has fabric-covered padded bottom. Contents include two Bakelite? buttons, nine mother of pearl buttons, two cards of fabric covered buttons, a spool of brown thread and two early black safety pins. Each corner on bottom of box has a brass stud foot.
Year Range From
1900
Year Range To
1920
Made By
Mark Cross
Storage Location
LancasterHistory, Lancaster, PA
Storage Room
DAC
Storage Wall
Island 4
Storage Cabinet
Unit 19
Storage Container
Box 1002: Sewing & Needlework
Subcategory
Textileworking T&E
Object Name
Box, Needlework
Material
Wood, Leather, Metal
Height (in)
1.75
Length (in)
5.5
Width (in)
3.25
Condition
Fair
Condition Date
2014-12-23
Condition Notes
Very worn, particularly the exterior leather which is strongly abraded with cracks and losses at corners and edges. Leather hinge and clasp are both detached. Two dark circular stains on lid top.
Object ID
1977.007.2
Place of Origin
New York, New York
Credit
Courtesy of LancasterHistory, Lancaster, Pennsylvania.
Accession Number
1977.007
Less detail
Collection
Tool Collection
Object ID
2016.999.6
Collection
Tool Collection
Description
Hammer with wooden handle and cast iron head. Head is symmetrical and rectangular with square crosshatching on either end. There is no marking stamped into the head. Neck is thicker than the rest of the handle. Head is slightly loose from handle. Both handle and head appear to be lacquered.
Storage Location
LancasterHistory, Lancaster, PA
Storage Room
DAC
Storage Wall
Island 4
Storage Cabinet
Unit 21
Storage Container
Box 0054
Subcategory
Masonry & Stoneworking T&E
Object Name
Bushhammer
Length (in)
13.5
Width (in)
3.125
Depth (in)
1.5
Condition
Good
Condition Date
2016-05-11
Condition Notes
Bore holes from beetle: 2 about and inch from the bottom of the handle; 4 inches from the bottom of the handle; 2 inches from the bottom of handle; one about four inches top of the head.
Object ID
2016.999.6
Credit
Courtesy of LancasterHistory, Lancaster, Pennsylvania.
Accession Number
2016.999
Less detail
Collection
Tool Collection: Textiles
Object ID
1950.007.391
Collection
Tool Collection: Textiles
Description
Needle case of orange glass, cylindrical with rounded closed ends. Two-piece case has short and long sections that pull apart to reveal inner lining - a tube of marbleized paper. Glass case has identical bands of painted decoration at open ends of each section. Short section has "Forget" painted in stylized script and an adjacent "M" (?). The "M" is also found near painted band of longer section with additional decoration (?) along side of case. Case contains 3 very fine needles of differing lengths.
Year Range From
1890
Year Range To
1910
Storage Location
LancasterHistory, Lancaster, PA
Storage Room
DAC
Storage Wall
Island 4
Storage Cabinet
Unit 19
Storage Container
Box 1002: Sewing & Needlework
Subcategory
Textileworking T&E
Object Name
Case, Needle
Material
Glass, Paper
Length (in)
3.5
Diameter (in)
0.375
Condition
Good
Condition Date
2015-05-06
Condition Notes
Broken at end of long glass section with loss. Some losses of surface paint. Residue of paper and adhesive along side of long glass section.
Object ID
1950.007.391
Accession Number
1950.007
Less detail
Collection
Tool Collection
Object ID
2016.007.8
Date Range
c. 1930
Collection
Tool Collection
Description
Octagonal length of bar with working end turned to side, flaring down to a sharpend edge. Purpose and name uncertain.
Provenance
Maker to daughter Ruth Eppley Ganse and spouse Robert N. Ganse to son
Date Range
c. 1930
Year Range From
1920
Year Range To
1940
Made By
Eppley, William J., 1882-1973
Storage Location
LancasterHistory, Lancaster, PA
Storage Room
DAC
Storage Wall
Island 5
People
Eppley, William J.
Subcategory
Metalworking T&E
Object Name
Chisel, Flat
Material
Steel
Length (in)
8.5
Width (in)
1.375
Condition
Good
Condition Date
2016-10-05
Condition Notes
Sufaces darkened with small areas of corrosion.
Object ID
2016.007.8
Usage
Eppley, William J., 1882-1973
Credit
Gift of Shirley Ganse
Accession Number
2016.007
Less detail
Collection
Tool Collection: Textiles
Object ID
1936.012.2
  1 image  
Collection
Tool Collection: Textiles
Description
Forged Brass three part sewing bird. Top surface of bird has a molded diamond pattern. Bird mounted on a C-clamp with threaded turn screw with heart-shaped handle.
Storage Location
LancasterHistory, Lancaster, PA
Storage Room
DAC
Storage Wall
Island 4
Storage Cabinet
Unit 19
Storage Container
Box 1002: Sewing & Needlework
Subcategory
Textileworking T&E
Object Name
Clamp, Sewing
Oither Names
Sewing Bird
Material
Brass
Height (in)
4
Length (in)
2
Width (in)
4
Condition
Good
Object ID
1936.012.2
Accession Number
1936.012
Images
Less detail
Collection
Tool Collection: Textiles
Title
Carding Comb
Object ID
2018.999.26
Collection
Tool Collection: Textiles
Title
Carding Comb
Description
Comb mounted on wooden board with 1/2-inch holes, 3 inches from each end and 1/8-inch holes 1.75" beyond larger holes (5.5 inches from ends). These holes are centered between side edges. Attached to top in center is a 7/5" x 4.5" x .5" piece of wood covered with a metal sheet fastened with tacks on all 4 sides. Large tacks on all 4 corners & 4 tacks from underside attach comb to board. 173 2-inch metal prongs form comb. Plant fibers still between some prongs.
PaGerman = 'die Hackel" (Stine, p. 281) 'Hackle" means combing flax to take out the tow.
Storage Location
LancasterHistory, Lancaster, PA
Storage Room
DAC
Storage Wall
Island 5
Storage Cabinet
Unit 39
Storage Container
Box 0348
Object Name
Comb, Carding
Height (cm)
1.27
Height (ft)
0.0416666667
Height (in)
0.5
Length (cm)
19.05
Length (ft)
0.625
Length (in)
7.5
Width (cm)
11.43
Width (ft)
0.375
Width (in)
4.5
Dimension Details
Board: 24" long x 4.5" wide x .5" high
Object ID
2018.999.26
Less detail
Collection
Tool Collection: Agriculture
Object ID
1912.007.1
Collection
Tool Collection: Agriculture
Description
Metal bar,small, rounded, curved end. Two holes drilled in center of bar.
Provenance
The minutes found in the Journal of Oct. 4, 1912 is a listing of "old utensils" given by Geo. W. Brown, printer from Lancaster, including bayonet, scabbard, old thimble, corn husker, egg beater.
Storage Location
LancasterHistory, Lancaster, PA
Storage Room
DAC
People
Jackson, David W.
Subcategory
Agricultural T&E
Object Name
Cornhusker, Hand
Object ID
1912.007.1
Notes
details needed
Usage
Jackson, David W.
Accession Number
1912.007
Less detail
Collection
Tool Collection: Textiles
Object ID
1950.007.327
Collection
Tool Collection: Textiles
Description
Wrought iron button-hole cutter, L-shaped, with axe-like blade at end of short leg and sharp point at end of tapered long leg.
Year Range From
1850
Year Range To
1900
Storage Location
LancasterHistory, Lancaster, PA
Storage Room
DAC
Storage Wall
Island 4
Storage Cabinet
Unit 19
Storage Container
Box 1002: Sewing & Needlework
Subcategory
Need to Classify
Object Name
Cutter, Buttonhole
Material
Iron
Length (in)
3.75
Width (in)
2
Condition
Good
Condition Date
2015-05-06
Condition Notes
Corrosion over much of surface.
Object ID
1950.007.327
Accession Number
1950.007
Less detail
Collection
Tool Collection
Object ID
2016.007.10
Date Range
c. 1930
Collection
Tool Collection
Description
Long, thin length of octagonal bar with striking head at one end and other end with four-fluted, slightly enlarged tip. Known for making holes in masonry by hand.
Marked "BALTIMORE 3/?". along side.
Provenance
Maker to daughter Ruth Eppley Ganse and spouse Robert N. Ganse to son
Date Range
c. 1930
Year Range From
1920
Year Range To
1940
Made By
Eppley, William J., 1882-1973
Storage Location
LancasterHistory, Lancaster, PA
Storage Room
DAC
Storage Wall
Island 5
People
Eppley, William J.
Subcategory
Need to Classify
Object Name
Drill, Star
Material
Steel
Length (in)
11.5
Diameter (in)
0.25
Condition
Good
Condition Date
2016-10-05
Condition Notes
Sufaces darkened with much pitting and corrosion, many scars and significant bending along length. Head is well flattened by hammer.
Object ID
2016.007.10
Usage
Eppley, William J., 1882-1973
Credit
Gift of Shirley Ganse
Accession Number
2016.007
Less detail
Collection
Tool Collection
Object ID
2016.007.11
Date Range
c. 1930
Collection
Tool Collection
Description
Long, thin length of octagonal bar with striking head at one end and other end with four-fluted, slightly enlarged tip. Known for making holes in masonry by hand.
Marked "BALTIMORE 3/?". along side.
Provenance
Maker to daughter Ruth Eppley Ganse and spouse Robert N. Ganse to son
Date Range
c. 1930
Year Range From
1920
Year Range To
1940
Made By
Eppley, William J., 1882-1973
Storage Location
LancasterHistory, Lancaster, PA
Storage Room
DAC
Storage Wall
Island 5
People
Eppley, William J.
Subcategory
Need to Classify
Object Name
Drill, Star
Material
Steel
Length (in)
11.825
Diameter (in)
0.25
Condition
Good
Condition Date
2016-10-05
Condition Notes
Sufaces darkened with some pitting and corrosion, many gashes and scars and significant bending along length. Head is well flattened by hammer.
Object ID
2016.007.11
Usage
Eppley, William J., 1882-1973
Credit
Gift of Shirley Ganse
Accession Number
2016.007
Less detail

49 records – page 1 of 5.