Heat sensitive fire alarm invented by Anthony Iske (1831-1920). Patented by Iske on Aug. 19,1890.
Inside the wooden case, on alarm mechanism/movement, printed in black ink: "J.A. Neiss, Sr." There is also the key to wind the alarm, loose on the floor of the holder.
Anthony Iske was born in France and immigrated to the U.S. in 1847. He moved to Lancaster in 1853 and became an American citizen in 1858. Along with his son, Albert, he held over 200 patents. Most notable of his inventions was the first meat-slicing machine, a model of which is in the collections of the Smithsonian Institution.
The Heat Motor was designed to turn the energy held by heated water into rotational movement. Heating the water in the trough would cause the air in the submerged cylinders to rise. As the engine began to turn, the cylinders would rise above the water, the air inside would cool, and the cylinders would fall on the opposing side, adding to the circular motion of the engine.
Stiletto or awl of steel with wood handle and handmade protective tip.
Tool has a shaft of rounded steel coming to a sharp point. Mounted on a black-painted, turned wood handle, largest at end and tapering toward steel shaft where it terminates with two turned rings.
A chromed metal slide glides along tool shaft and is clamped in place with a knurled screw. Stamped on this slide is "PATD' APR-6-09" (or 00) and nearby is a symbol with the words "TRADE/ MARK."
Stiletto is fitted with a protective tip made of a bottle cork with crocheted cover and crocheted top ring.
Provenance
Collected by Lillian Hollings Kiker, born to Scottish Americans who lived in New Jersey. Born (1912) and lived in New Jersey, last of Egg Harbor, she was active with quilting, sewing, knitting & crocheting. Collection inherited by donor when her mother passed away.
P95.02.01A: Crystal ball is a sphere of clear glass containing tiny interior bubbles and barely perceptible striations on the surface corresponding to lines of latitude.
P95.02.01B: Base for ball is a turned disk of pine with recessed top in which to
Place of origin is unknown.
Provenance
9/07/2012 - Transferred from HC Collections; 12/29/94 - Purchase from Book Haven 146 N. Prince Street, Lancaster, PA 17603
Glass ball has minor surface abrasions or imperfections; some small nicks and scratches in the base, and a 1/2" area of finish loss on the center of the bottom.
Pewter basin, part of the Warwick Congregation's (now known as the Brickerville United Lutheran Church) communion service.
High, rounded sides flare out to a flattened rim with rolled edge. Booge appears to be unhammered. Barns struck his large circular mark with an eagle on the inside of bottom. The left portion of the eagle as well as the letters "BAR" on the bottom are discernible, as well as the "HE" above the eagle.
Probably made in Middletown or Wallingford, Connecticut.
Provenance
The entire communion service remained in use over the years until the congregation decided in 1997 to find a safe place for this valuable communion set. Purchased by the Heritage Center of Lancaster County.
Pewter beaker or handleless cup. Part of the Warwick Congregation's (now known as the Brickerville United Lutheran Church) communion service.
Cylinder form flares out slightly at bottom as well as top. Banded at base.
Engraved on the exterior, near top, are the small initials "M.W."
Provenance
The entire communion service remained in use over the years until the congregation decided in 1997 to find a safe place for this valuable communion set. Purchased by the Heritage Center of Lancaster County.
Diameter of bottom is listed. Diameter of top is 2.5".
Condition
Good
Condition Date
2014-08-28
Condition Notes
Overall abrasions, pitting, small dents and staining. Rim has multiple small dents and abrasions. Bottom interior is pitted. Wear underneath with some areas slightly cracked. Dent at base.
Object ID
P.97.08.5
Place of Origin
Hartford, Connecticut
Credit
Acquired through the generosity of the James Hale Steinman Foundation and Friends of the Heritage Center Museum, Heritage Center Collection
Ribbon threader or bodkin is a blade of nickel-plated non-ferrous metal, in a torpedo shape, wide and rounded at one end and tapering to a point at other end. Two slots are cut in wide end for stringing ribbon that needs to be threaded through casings in waistbands, wristbands, etc.
Stamped inscriptions: On one side of tool is "RIBBON THEADER", "REGISTERED", "No. 3", AND "K.B.C.".
Provenance
Collected by Lillian Hollings Kiker, born to Scottish Americans who lived in New Jersey. Born (1912) and lived in New Jersey, last of Egg Harbor, she was active with quilting, sewing, knitting & crocheting. Collection inherited by donor when her mother passed away.
Stiletto or bodkin of turned bone, fitted in a conical basket-weave holder or sheath.
Stiletto (A) has ball-shaped head with hole in it, then narrowing to a neck with additional swells and narrowing until it tapers from midsection down to a sharp point.
Holder (B) is an elongated cone made with a brown reed-like material woven onto ribs like a basket. Handle is a twisted form of the same material, shaped in a double loop configuration.
It is assumed that this pair of otems were originally dwsigned for each other.
Provenance
Collected by Lillian Hollings Kiker, born to Scottish Americans who lived in New Jersey. Born (1912) and lived in New Jersey, last of Egg Harbor, she was active with quilting, sewing, knitting & crocheting. Collection inherited by donor when her mother passed away.
Bodkin of bone is a flattened needle with one rounded end and one end with a blunt point. Slot of 5/8" in length is cut into body near rounded end. This tool is used for threading ribbons, etc. through casings, fabric tubes or loops.
Provenance
Collected by Lillian Hollings Kiker, born to Scottish Americans who lived in New Jersey. Born (1912) and lived in New Jersey, last of Egg Harbor, she was active with quilting, sewing, knitting & crocheting. Collection inherited by donor when her mother passed away.
Bodkin of steel is a blunt needle used for threading ribbons, tape or other fabric through casings, loops, etc.
Bodkin is two thin pieces of tapered steel that are laminated together through half their length at narrow end. Two pieces at wider end are separated, allowing a ribbon or other material to be fitted into "jaws" and clamped in place via a sliding mechanism fitted into slot that extends lenthwise toward jaws. Jaws are enabled to hold material without slipping via two raised beads stamped into one side and two matching holes on other side.
Stamped onto one side of tool at midsection is "PATD. MAR. 29. 92."
Provenance
Collected by Lillian Hollings Kiker, born to Scottish Americans who lived in New Jersey. Born (1912) and lived in New Jersey, last of Egg Harbor, she was active with quilting, sewing, knitting & crocheting. Collection inherited by donor when her mother passed away.
A: Red rubber hot water bottle, 57.5-inch long red rubber tube, black plastic threaded screw-in top and 2 black plastic 'syringes.' Also a 2-year guarantee slip (7.75 ins. wide x 3.625 ins. long). Ecru paper with green border; on reverse are 5-step directions for use.
B: Lid to box has photo of "Armstrong's 2-Quart Capacity / Topper Combination Syringe / Distributed by Armstrong Cork Company, Lancaster, PA." On both lengthwise sides is the circular company logo with "Made In United States of America." Box lid is colored blue-green and black. Written on top, in red: "XBEF 4.70"
Medicine bottle. Label reads "No. 13 17 [or 19] / prescribed by Dr. [illegible] Filbert / Offices--Front St. between Locust and Walnut Sts. / Directions / Take a teaspoon full 3 times a day / from Sam'l Filbert's Golden Mortar Drug Store/ Front Street Columbia PA" Bottle has dark reddish-brown liquid dried inside.
Chinese export bowl of high fired porcelain, polychrome decoration under glaze. Thin walled in nearly hemispherical form sitting on a 3/4" raised foot. Gold-painted rim with red edging. Two goldfish inside bottom. Continuous landscape on exterior is the same repeating Roman or Greek scene of a seated half-robed seated man with dog facing three nude women and seated baby. All set against distant mountains and one tree in foreground.
Glazed soft paste porcelain bowl, hand-painted "Kings Rose" pattern decoration. Sitting on a footring , the bowl has steeply curving high sides. Decorated on opposing sides with the same design of a large red flower surrounded by smaller yellow flowers with rust petals and leaves.Interior design along rim are four pink flowers spaced around rim and linked by thin line banding, S-curves, and various round shapes. Center of bottom has one red flower with leaves.
Papers stickers underneath are: "Gaudy Dutch/ Kings Rose," then "18B" and finally a loan number "6.23.82" referring to the 1982 loan to the Heritage Center.
Small scratches and areas of paint loss, particularly the round, green "fruits" on inner rim. Inside discoloration, stains, soil. Some wear to foot ring. Rim has multiple tiny chips, abrasions and wear.
Bowl (1992.11.7) shaped to crade lid (1992.11.7a). Top edge banded in gold, on both top and undersides. Wide gold band with narrow band beneath encircle the bowl. Narrow band around the base.
Lid decorated with gold grapes (as a grip) resting on painted-veined grape leaves. "Atlee" lettered in gold on opposite sides. Base of the lid encirocled by wide gold band with thin bands inside around extruded top.
Large, shallow redware bowl. Interior base is slip decorated using a stencil of a rooster. Chased into bottom is the name of the maker and date of construction, "Anne Stodder Adams (Umlauf)