Long, thin length of octagonal bar with striking head at one end and other end with four-fluted, slightly enlarged tip. Known for making holes in masonry by hand.
Marked "BALTIMORE 3/?". along side.
Provenance
Maker to daughter Ruth Eppley Ganse and spouse Robert N. Ganse to son
Long, thin length of octagonal bar with striking head at one end and other end with four-fluted, slightly enlarged tip. Known for making holes in masonry by hand.
Marked "BALTIMORE 3/?". along side.
Provenance
Maker to daughter Ruth Eppley Ganse and spouse Robert N. Ganse to son
A. Rectangular pincushion; bottom is red cotton twill and top is solid red wool cross stitch with "M.S." (Miriam Sener, b 1876) a line border done with clear beads. Dense stuffing. 2.5" x 2"
B. Pincushion, 3 inches square. Pink silk fabric covers bottom and is folder over to top. A lace-trimmed 2-inch square of white fabric with embroidered white flowers is attached to the top by 20 one-quarter-inch straight pins,.25-inch apart, lining the edge of the fabric. Pins have varied colored glass heads. An additional 4 pins anchor the center. This cushion is densely stuffed. Some holes in the fabric on the bottom and fabric at corners is worn. (Box 0478)
C. Pincushion, 3.24 inches square, covered in light blue satiny fabric. Corners gathered on top to form puffy leaf shapes on each corner. A small lace-edged 1.25-inch square is pinned in the center with five glass-head straight pins. A blue ribbon bow is pinned at two corners. Some holes at the corners. (Box 0478)
A: Homemade awl or piercing tool with hand-shaped shank with turned up tip set into a crude wooden handle with no finish. L: 5.25"
B: Awl or bodkin with decoratively turned walnut or rosewood handle fitted with a foresection of bone set into handle that tapers to a sharp point. L: 5"
C: Section of cow's horn (thumb protector?) L: 3.25"
D. Section of cow's horn (thumb protector?) L: 3"
Provenance
These four items were designated as basketweaving tools by donor. Unknown origin.
Lignum vitae lead-dressing stick. odd shaped heavy wooden tool has flat bottom, flat front end and long round handle on opposite end. Dark lignum vitae wood, natural finish with white paint at various places on handle.
Lead dressing stick is used to "dress" or shape, flatten, and smooth sheet lead.
Provenance
Maker to daughter Ruth Eppley Ganse and spouse Robert N. Ganse to son
Cast Iron Hubley Motorcycle with driver. Red "Indian" motorcycle with sidecar has a removable policeman with uniform, goggles, badge, sidearm, cap, boots and gloves. Cycle is painted red with silver handlebars, engine and highlights; sidecar seat is black. Decal on left side of gas tank has "Indian" on gold ground. Policeman is painted black with silver goggles, badge and buckle; face is pink. Three tires are marked "HUBLEY MFG CO. BALLOON" w/ size and "CORD". Metal "clicker" underneath. Sidecar policeman missing.
Moderate overall wear with soiling and significant scattered rusting and corrosion. All tires are flattened with some additional deformation.
Object ID
2010.023.2
Notes
Hubley Toy Company produced many different models, sizes and compositions of motorcycles during the years they were in production. Most of the motorcycles were based on Harley Davidson and Indian in the earlier years and then expanding to the BMW and perhaps others. Indian models are the most sought-after and have the highest value.
