A Cannon Pinion, 2 pieces (in a small circular metal container with lid.) Accompanying patent documentation in file). A part for inside a clock.
Cannon Pinion is the heart of the motion works. This piece translates the movement of the wheels on the back into the time keeping display on the front.
Long, thin length of octagonal bar with striking head at one end and other end with four-fluted, slightly enlarged tip. Known for making holes in masonry by hand.
Marked "BALTIMORE 3/?". along side.
Provenance
Maker to daughter Ruth Eppley Ganse and spouse Robert N. Ganse to son
Long, thin length of octagonal bar with striking head at one end and other end with four-fluted, slightly enlarged tip. Known for making holes in masonry by hand.
Marked "BALTIMORE 3/?". along side.
Provenance
Maker to daughter Ruth Eppley Ganse and spouse Robert N. Ganse to son
Tatting hook of bone handle shaft of iron hook set into smaller end.
Tool has handle of elongated teardrop shape, somewhat flattened in cross-section. Wire-like shaft with rounded hook on tip is set into handle. Shaft is thicker than hooked end.
Provenance
Collected by Lillian Hollings Kiker, born to Scottish Americans who lived in New Jersey. Born (1912) and lived in New Jersey, last of Egg Harbor, she was active with quilting, sewing, knitting & crocheting. Collection inherited by donor when her mother passed away.
Small tool with thin curving blade set into a turned wood handle and brass ferrule. Saber-like blade is brass, having a small slot cut into bottom edge near tip.
Used for warping a loom by pulling warp ends through the reed.
Flat shaped tool is constructed of two sheet brass sides riveted together at the handle end, allowing a flat triangular iron blade that is sandwiched between to slide out at the other end for cutting. Blade slides via a small riveted guide that slides along a slot in the brass sides. Cutter's brass sides have a fleur-de-lis-shaped handle and scalloped sides and each slot has a measuriing scale numbered from one to ten.
Inscription: The sliding guide on both sides of the slot reads "D.M.CO. / PAT SEPT. 3, 72 / BPT.CONN."
Provenance
Collected by Lillian Hollings Kiker, born to Scottish Americans who lived in New Jersey. Born (1912) and lived in New Jersey, last of Egg Harbor, she was active with quilting, sewing, knitting & crocheting. Collection inherited by donor when her mother passed away.
A. Rectangular pincushion; bottom is red cotton twill and top is solid red wool cross stitch with "M.S." (Miriam Sener, b 1876) a line border done with clear beads. Dense stuffing. 2.5" x 2"
B. Pincushion, 3 inches square. Pink silk fabric covers bottom and is folder over to top. A lace-trimmed 2-inch square of white fabric with embroidered white flowers is attached to the top by 20 one-quarter-inch straight pins,.25-inch apart, lining the edge of the fabric. Pins have varied colored glass heads. An additional 4 pins anchor the center. This cushion is densely stuffed. Some holes in the fabric on the bottom and fabric at corners is worn. (Box 0478)
C. Pincushion, 3.24 inches square, covered in light blue satiny fabric. Corners gathered on top to form puffy leaf shapes on each corner. A small lace-edged 1.25-inch square is pinned in the center with five glass-head straight pins. A blue ribbon bow is pinned at two corners. Some holes at the corners. (Box 0478)