White with blue transfer print. Floral border. Large flowers: tulip and poppies. Pastoral picture on bottom of bowl. Pitchers has pictures of tress, bushes, groups of deer, three long-horned cows, Georgian mansion with brick wall, boy fishing.
A Federal era washstand with a top and lower shelf. Top shelf has a centered opening to support a wash basin with two square pockets at the back corners to store a bar of soap and/or a shaving mug. The wood splash back is three sided and scroll cut with a raised back; the sides slope down to rounded shoulders at the front skirt that has bead trim both top and bottom. The top shelf surmounts four square blocks that transition to double ring and ball turned uprights. The lower shelf is mounted 18.5" below the top shelf with a full width drawer on its skirt with a wooden mushroom-shaped drawer pull in the center and double-bead trim at the bottom. The lower shelf surmounts four square blocks that transition to double ring and ball turned legs that terminate on peg feet.
Oval Hoop (inner/outer pieces). Inner hoop connected to 2 grooved pieces that rests and pivot on small metal bar, turned wood supports attached to cross piece which has inlaid wood 'R' on left and 'L' on right-with rosette in center. End Boxes have hinge
American
Provenance
Belonged to Harry Hostetter's mother, Ida L. Kegerreis Hostetter.
Leaded glass. 10 sided bottom. Finger-cut design toward bottom. 10 sided finger-cut shoulder. Neck has 3 beaded rings and flattish lip. Stopper is drop-shaped, pointed at top and is 7 faceted. Body is slightly flared to shoulder.
Shaving Stand: Long rectangular drawer at center flanked by two sets of drawers. Top side drawers are rectangular, bottom side drawers are larger than top. Ball feet with right-turned legs, four legs in front and two in back. Inlaid lighter wood outlinin
Provenance
Sold to the James Buchanan Foundation by an unknown dealer in Lancaster, PA
Sheraton style mahogany, holly and rosewood knife box. The slanting, hinged and hollow lids feature a metal ring on the front. The lids and the case fronts have a serpentine shape with inlaid wood strips at corners on the front, lid and bottom. Top front of the cases have a keyhole beneath the lid seam. The cases surmount three feet; one centered at the middle front wall and two under the back corners. Interiors have six compartments of varying depths that correspond to the slope of the cases.
Long, wooden handled tool with solid, flat metal end. Iron part is two peices - flat scrapper is 12.25'x 5.5' with the longest edge being sraight and the remaining edge being curved. The scrapper is rivioted to the handle holder which is a bent rod that
Base wood with torus molding edge. Flat top with deep circular groove in which rests the edges of a tall glass dome. Natural arrangement under dome rests on base. Dried flowers support central mud-daubed bird's nest with light blue, speckled eggs (6) two
Cut glass liquor decanter with spiral cut glass mushroom lid. Neck consists of 4 rings. The body of the decanter is a decagon shape (10 sides). 1.00" break/missing glass along the lip.
Year Range From
1714
Year Range To
1837
Storage Location
Wheatland, Lancaster, PA
Storage Room
Library
Storage Wall
Southwest Wall
Storage Cabinet
Table
Storage Shelf
Table Top
Object Name
Decanter
Material
Glass
Height (cm)
28.575
Height (ft)
0.9375
Height (in)
11.25
Depth (cm)
8.89
Depth (ft)
0.2916666667
Depth (in)
3.5
Circumference (ft)
37.465
Circumference (cm)
1.2291666667
Circumference (in)
14.75
Dimension Details
Measured height includes mushroom stopper. Height of body is 8.50". Measurements taken with tape measure.
Height: Measured bottom to top
Circumference: Measureed at widest point of the body
Named for its principle use, this mahogany table top, with its oblong top and bead molded edge, was typically found at the side of a bedstead. The table's skirt is three to four inches deep and contains a single drawer that is the full width of the skirt. The drawer has two original brass knob pulls and a top centered brass escutcheon keyhole. The table is supported by four round tapering legs with ring and ball turnings at the top and two sets of ring turnings approximately two inches above the tapered feet of the legs.
Provenance
Alexander Speer, maternal first cousin to James Buchanan
"A.B. Rote & Co., Ornamental and Structural Iron and Steel Works" advertisement containing a list of work done by the company and address. A precise ink drawing (scale 1"= 1 ft.) of a sample ornamental iron gate is featured below the written information.
Items listed include: plain and ornamental iron fences, cellar grates, window guards, iron stairs, fire escapes, stable fittings, brass and iron grilles and railings, elevators enclosures, beams and girders, roof trusses and columns, bolts and anchors and erecting of structural steel works.
A night commode chair that has a four-slat back crest with a Windsor arrow design at the lower back of the chair. The high back chair has turned legs, which are braced by ring-turned box stretchers. The seat has a hole cut out at its center with a separate wood lid with a wrought-iron handle fixed by two screws. The underside of the seat no longer has rabbets to support its zinc or lead chamberpot.
Windsor-back rocking chair. The comb-shaped crest has gold painted trim and hand-painted floral, fruit and nut designs. The slab seat also has a hand-painted gilt outline. The two front legs have gilded turnings along with the front stretcher. The two back legs are canted into the rockers and are plain and round with a thin round plain stretcher. Dark wood. Six thin back rails.
Shaving stand is comprised of a mahogany veneer; the mirror attached to the top has a veneered bull-nose frame supported by ring and vase-turned stiles set into the top with tenons at a backward cant. The skirt has two half-drawers; however, the brass knob drawer-pulls are missing. The stand is supported by four ring and ball turned feet
Copper teakettle with round body, gooseneck spout, very low domed lid w/ scrolled knob of sheet copper riveted onto lid with a hand-cut washer added under lid, suggesting repair or replacement. Curved handle hinges onto tapered plinth tab bases with two rivets each. Vertical dove-tailed side seam opposite single-seamed spout. Dove-tailed bottom.
Touchmark on top of handle is "R..REED." within a rectangular reserve with serrated ends.
Made by Robert Reed, working in Lancaster 1771-1779, then 1785-1795.
Provenance
Purchased by Heritage Center from Philip Bradley Antiques
Transferred from Heritage Center to LancasterHistory.org December, 2012.
Tax assessment lists Robert Reed 1786-1793.
Kauffman, Henry J. American Copper and Brass. New York: Bonanza, 1979.
Coppersmith info from Shelley Horvath Posten (dau. of Don Horvath), 2009
Copper dented and scratched overall, polish residue at handle hinges. Side handle break repaired with sheet iron patch secured to outside with two iron rivets. Knob appears to be a repair or a replacement.
Object ID
P.80.131
Place of Origin
Lancaster
Credit
Heritage Center Collection. Purchased through the generosity of the James Hale Steinman Foundation,
Round copper vessel, shaped like a teakettle, but without a spout. A shaped strap handle is attached to each side of the opening at shoulder with riveted brackets. The handle widens near the middle, where the maker's mark is stamped: "P & B. SCHAUM"
Body is dovetailed to base, one dovetailed vertical seam, handle attached to flanges held in place by two rivets each. Pot insert is missing. Another insert (S.13) was purchased as a replacement.
Vessel has multiple dents, creating a general distortion overall. Surface is also tarnished and has drip stains running down the sides. The bottom is very worn and has numerous stains. Blueish-white stains on the inside. Polish residue on handle.
Object ID
P.77.61
Place of Origin
Lancaster
Related Item Notes
See broadside for Benjamin Schaum's hardware store, P.91.02
Credit
Heritage Center Collection. Purchased through the generosity of the James Hale Steinman Foundation
Strainer of glazed redware, but with a lighter brown color than most redware. Resting on three tapered 1-1/8 " long feet. The flat-bottomed dish has straight sides that flare out to a molded, high lip. Applied handles at sides. Large holes in bottom and three rows of smaller holes at sides.
Lead glaze overall with some streaks/runs of a darker brown.
Numerous chips on body overall; some large ones on underside and a large chip on the side; handle edges have suffered the most significant chipping loss. Glaze is crackled overall and has some staining, particularly on the interior. Feet are moderately worn.
Object ID
G.98.12.17
Place of Origin
Pennsylvania
Credit
Gift of Mrs. S.R. Slaymaker II, Heritage Center Collection